The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old November 12, 1998, 08:36 PM   #1
BIG JOHN
Junior Member
 
Join Date: November 12, 1998
Location: Manchester,TN 37355
Posts: 6
Does anyone have any loading data for the 9x23? I would like to use Vit. powder.
BIG JOHN is offline  
Old November 13, 1998, 12:18 PM   #2
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,992
Just looked in Vihtavouri's site. They don't list the 9x23. www.lapua.com/vihtavouri/
fal308 is offline  
Old November 13, 1998, 08:08 PM   #3
BIG JOHN
Junior Member
 
Join Date: November 12, 1998
Location: Manchester,TN 37355
Posts: 6
I haven't found anybody with info on 9x23!!!
BIG JOHN is offline  
Old November 13, 1998, 10:18 PM   #4
Spectre
Staff Alumnus
 
Join Date: October 23, 1998
Location: ATL
Posts: 3,277
I did read an article on the 9x23 about 4 or 5 mos ago, but I don't remember the publication. I seem to recall that the gist of it, was that "white box" 9x23 would be coming out, and was a great deal.
Spectre is offline  
Old November 13, 1998, 11:15 PM   #5
BIG JOHN
Junior Member
 
Join Date: November 12, 1998
Location: Manchester,TN 37355
Posts: 6
I bought 4 boxes of the factory 9x23. I believe the article was in American Handgunner. Best I can tell, you start out at max loads for the 38 Super and watch for pressure signs. I don't really like that idea. They tell me you can push the 125gr at about 1600 fps! Vit. powder IS my favorite but there is limited data on it. It works great in my 45acp, 200gr swc, 4.5 of N310.
BIG JOHN is offline  
Old November 13, 1998, 11:46 PM   #6
Rob Pincus
Senior Member
 
Join Date: October 9, 1998
Location: Hotels
Posts: 3,668
Okay, this one took me a while and I'm still not sure I got it right.
Is it the 9x23 aka the 9mm Largo ?? If so, here is the info you are looking for:

http://w3.one.net/~melchar/largo/index.html

OR, is it 9x23 Winchester? then try this:
(from winchester)

Handgun Data-9x23mm Winchester
Charge Weight Velocity Pressure
Bullet Weight & Type Powder in Grains (fps)
125 grains JHP 231 5.3 1180 38,000 psi
125 grains JHP 231 6.3 1300 46,000 psi
125 grains JHP WAP 6.3 1180 34,000 psi
125 grains JHP WAP 8.4 1435 46,000 psi


If it was the 9x23 Winchester you are looking for, the article was in G&A and a summary of it can be found here:
http://www.productreviewnet.com/abstracts/2/2021.htm

If those aren't it, let me know... I'll keep looking.

[This message has been edited by Rob (edited 11-13-98).]
Rob Pincus is offline  
Old November 14, 1998, 10:24 AM   #7
Rob Pincus
Senior Member
 
Join Date: October 9, 1998
Location: Hotels
Posts: 3,668
I got this from some the guys who build the 9x23 Avenger (see online Gungames Mag for more info..):


We have had good luck with the starline 9mm supercomp with a
124gr hornady flatpoint and vita vohri 540 powder a good starting
place is 8 grains of powder and a overall length of 1.245...



Rob Pincus is offline  
Old November 14, 1998, 05:57 PM   #8
Walt Welch
Senior Member
 
Join Date: November 3, 1998
Location: Alamo, CA
Posts: 424
Big John; I am apalled to find that you are working with a very high pressure cartridge with a lack of knowledge as to finding reloading information.

NEVER take anyone's word for a load; use manufacturer's data only.

First, be sure of which cartridge you are working . The nomenclature '9x23' is imprecise, as was shown by Rob's post; I doubt very much that you are working with the antique 9mm. Largo. Remember also that the .38 Auto and .38 Super are also 9 x 23mm.

You want data for the 9 x 23mm. Winchester.
The FIRST place to look is the manufacturer. Check out www.winchester.com, and you will find a wealth of information, including a reloading manual downloadable in .pdf format. You can even download the Adobe Reader if you don't have the ability to work with the .pdf format. The reloading manual has four loads for the 9 x 23mm Winchester!!

Second, check with the NRA. Just e-mail them and they will give you what data they have.

Third; telephone or e-mail the other component manufacturers, especially those who publish data for other manufacturers' components, such as Hodgdon; I have done this to get data not included in their latest manual. Lyman is also another good source for these data. Always use the latest data available; most recent data are generated using the piezoelectric method; these data are much more accurate than the old crusher method data. Winchester dramatically changed their recommendations for the 9 x 19mm Parabellum when they tested the cartridge with the piezoelectric method several years ago (they revised loads downward).

For other firearms related questions, shooter's gunlinks is a good site with links to many different sites (including Winchester). Here is the URL:
http://www.shooters.com/gunlinks/index.htm

Hope this helps. Walt Welch, reloader since 1955. NRA Life Member
Walt Welch is offline  
Old November 14, 1998, 06:06 PM   #9
Rob Pincus
Senior Member
 
Join Date: October 9, 1998
Location: Hotels
Posts: 3,668
Good advice all around, Walt...

(BTW- those loads I posted from Winchest came from that very .pdf file you mentioned which is FULL of good info.)

-Rob

------------------
-Essayons
Rob Pincus is offline  
Old November 14, 1998, 07:52 PM   #10
Walt Welch
Senior Member
 
Join Date: November 3, 1998
Location: Alamo, CA
Posts: 424
Rob; I knew exactly where your info came from. I intentionally didn't mention that, as I feel everyone should go to the SOURCE themselves.

But, that said, it was nice of you to post it, and I glanced at it superficially, and it seemed to be the same as what I found on the Win site.

Thanks for the kind words. Walt
Walt Welch is offline  
Old November 14, 1998, 08:04 PM   #11
BIG JOHN
Junior Member
 
Join Date: November 12, 1998
Location: Manchester,TN 37355
Posts: 6
Thanks Rob and Walt!! That will give me a few places to start. Mine is the 9x23Win. I have talked with Dane Burns of Burns Custom Guns about some loading and found that he has only used Winchester powder. He has used some 9mm Super Comp brass but would only get 1 major and about 4 target loads before the case split! It is about $50 per thousand cheaper.
BIG JOHN is offline  
Old November 15, 1998, 12:20 AM   #12
Walt Welch
Senior Member
 
Join Date: November 3, 1998
Location: Alamo, CA
Posts: 424
Big John; I hope I interperted your post correctly; that you intend to buy 9 x 23mm Winchester cases, and not some other type.

Remember that internal capacity is critical, and that thicker brass means decreased internal capacity. Using the correct brass for the caliber is important.

Further, I suggest you use the recommended primer, which I believe to be the WSPM; the Winchester Small Pistol Magnum. I have found in the past significant differences in the hardness of WSPM primers and small pistol magnum primers of a different make. Since Winchester developed the load with Winchester components, use them!!

Happy Shooting, Walt Welch NRA Life Member
Walt Welch is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07314 seconds with 10 queries