The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools Search this Thread
Old August 9, 2020, 12:14 AM   #1
BourbonCowboy
Senior Member
 
Join Date: April 6, 2019
Posts: 127
Scope for Winchester Model 100 .308

I've been gifted a Winchester Model 100 in .308. I believe it was manufactured in the late 60s, and it's got a crappy old Bushnell scope - which I'd like to upgrade. However, I don't know much about rifles and scopes, so I thought I'd ask. What's a good scope to mount on the rifle without breaking my bank account? I'll be using it for deer hunting only.
BourbonCowboy is offline  
Old August 9, 2020, 09:07 AM   #2
WalnutBill22
Member
 
Join Date: May 17, 2014
Location: West Tennessee
Posts: 60
I'd suggest a Redfield Revolution in 2-7 or 3-9x. They can be found for about $150-200 and are of excellent quality.
WalnutBill22 is offline  
Old August 9, 2020, 12:36 PM   #3
BourbonCowboy
Senior Member
 
Join Date: April 6, 2019
Posts: 127
I will definitely take a look. Thanks for the tip.
BourbonCowboy is offline  
Old August 9, 2020, 06:37 PM   #4
Polinese
Senior Member
 
Join Date: September 27, 2010
Posts: 949
Not sure but I think the revoultions were discontinued as Leupold has been slimming down and revamping several of their lines. I think the VX-Freedom were the replacement for the redfield revolutions.

Looks like you can still find the revolutions pretty easily though.
Polinese is offline  
Old August 9, 2020, 08:31 PM   #5
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 10,809
The Revolution was introduced about 12-15 years ago. At the time it was simply a Leupold VX-1 with different badges on it and a slightly lower price. At the time it was a lot of scope for the money. You can still find new Revolution scopes and it is still the same scope that was introduced 15 years ago with no upgrades. Which isn't bad, but...

Since then the VX-1 has been updated and improved twice, and eventually dropped along with the VX-2. The new VX-Freedom replaced the VX-1 and VX-2 and can be had for around $200. Only slightly more than the Revolution, but a significant upgrade in quality.

If you want to keep it under $200 the Burris FF-II is my choice. It is in my opinion every bit as good as the VX-2 or VX Freedom. I see them for around $150.

IMO anything any less expensive is probably a waste of money. I'd also stay with a 3-9X40, you get more scope for the dollar with that scope.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong"

Winston Churchill
jmr40 is offline  
Old August 9, 2020, 11:04 PM   #6
bobn
Senior Member
 
Join Date: December 30, 2006
Location: midwest
Posts: 1,105
which model bushnell. if an older scopechief or original banner they were decent. trophy not so much. bobn
bobn is offline  
Old August 10, 2020, 04:15 PM   #7
jrothWA
Senior Member
 
Join Date: November 11, 2006
Posts: 2,519
if the Sn iis just numbers, then before 1964.
If a "alphabit " charactoer "A" or "B', then psost 1964

Olin has a 800 number [800-852-5734] known as "WinchesterFirearms Notice".
The M100 was under rcall for replacing the firing pin{FP}, as some would crack with possiblility of going "full auto".
Callthe number and run the SN, if stillacive they send a new FP and some money for a smith to replace.

For a scopea varaible 1 - 4xwill do nicely on them, depending on the aarea youmay use for huntoing. Mine have original Weavers!
jrothWA is offline  
Old August 11, 2020, 10:38 AM   #8
COSteve
Senior Member
 
Join Date: September 6, 2009
Posts: 1,344
Quote:
Originally Posted by WalnutBill22 View Post
I'd suggest a Redfield Revolution in 2-7 or 3-9x. They can be found for about $150-200 and are of excellent quality.
I'll second that as I have a 1959 Model 88 in .308 with a 3-9 with Accu-Range reticle on it myself. Works great on mine. I have it sighted in at 200yds. As to a mount, I found a NOS Redfield one piece mount for the 88 and here is what it will look like on your 100 (sands the lever):



BTW: Amazon has them for $209 HERE.
COSteve is offline  
Old August 13, 2020, 12:23 AM   #9
BourbonCowboy
Senior Member
 
Join Date: April 6, 2019
Posts: 127
I've checked and the rifle was made in 1968...and the firing pin has not been replaced. I actually sent it to a friend who owned a gun shop, but he died of cancer before he could get it repaired. I plan to get the new firing pin replaced before I use it. I just wanted to check on new scope suggestions, as I might have the new scope installed with the firing pin.
BourbonCowboy is offline  
Old August 13, 2020, 12:26 AM   #10
BourbonCowboy
Senior Member
 
Join Date: April 6, 2019
Posts: 127
As far as scope prices go, I'd like to keep it under $300...including shipping and taxes. As far as range goes, 200-250 yards at most. Maybe that will help for suggestions.
BourbonCowboy is offline  
Old August 14, 2020, 01:08 AM   #11
Polinese
Senior Member
 
Join Date: September 27, 2010
Posts: 949
Something from the leupold VX-Freedom is probably the way to go IMO
Polinese is offline  
Old August 15, 2020, 05:34 PM   #12
dgludwig
Senior Member
 
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
For deer hunting where I do in Michigan, Ohio and Pennsylvania where shots are relatively close and cover is heavy, I prefer scopes that are as compact and light as practical. A quality 1X5 or, at most, a 2X7, suits me well. I hate scopes that are bigger and heavier than necessary because they can rob the rifle of any good handling qualities it might otherwise have-and the Winchester Models 100 and 88 possess good, innate handling traits in my experience.
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED
...Aristotle
NRA Benefactor Life Member
dgludwig is offline  
Old August 16, 2020, 10:52 PM   #13
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,309
+1

Another vote for a tidy scope. Especially on a sleek, handsome old rifle like a Win 100. I like low power variables too, but the .308 cartridge does have some reach to it, and a bit more magnification is an asset for most of us on longer shots, and doing point counts on deer when hunting QDM and WMA lands requiring so many antler points on a side to be legal.

My M88 wears a 6x36mm scope, after supporting a fixed 4x32mm for many years. A tidy variable like a 2x7x33 might be ideal. The Win 88/100 family has a very classic stock shape that lacks a cheek piece or Monte Carlo comb. When the rifles were introduced in the late 1950's, factory irons and peep sights were still quite common in the deer woods, scopes were still breaking ground with the traditionalists. Consequently the 88/100 family have comparatively low combs that will not lend themselves to a high mounted, big bell scope. With the smaller bell sizes, one can usually use low rings, which work well with the 88/100 stock design. As noted, a big clunky scope will spoil the rifles wonderful handling qualities as well, and add unnecessary weight on long hunts or rough ground.
bamaranger is offline  
Old October 25, 2020, 01:08 AM   #14
BourbonCowboy
Senior Member
 
Join Date: April 6, 2019
Posts: 127
First, thank you all for your input. It gave me a lot to think about...and I finally made a decision.

I bought a Vortex Crossfire II with the V-Brite illuminated reticle. Hopefully this will work well with the old rifle. Here's the one I bought...

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
BourbonCowboy is offline  
Old October 25, 2020, 08:49 AM   #15
Drm50
Senior Member
 
Join Date: November 10, 2014
Posts: 1,381
I had/have a small collection of classic deer rifles. Still have a couple dozen. About half are scoped with 3x or 4x, the others reciever sights. I have bolt actions in standard calibers with 6x and a couple 8x. I’m a die hard and don’t like variables.
Drm50 is offline  
Old October 25, 2020, 09:42 AM   #16
Geezerbiker
Senior Member
 
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 1,908
If the scope is as good as the Vortex binoculars I have, you're going to love it.

Tony
Geezerbiker is offline  
Old October 25, 2020, 12:51 PM   #17
shurshot
Senior Member
 
Join Date: August 25, 2006
Posts: 1,819
The older Weaver fixed 4 looks aga appropriate on a model 100 and works fine for under 100 yard shots.
shurshot is offline  
Old October 25, 2020, 02:01 PM   #18
Geezerbiker
Senior Member
 
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 1,908
Those old steel tube scopes are getting hard to come by. I have a 3 to 9x on my model 70 and I'm pleased with it.

Tony
Geezerbiker is offline  
Old November 4, 2020, 11:54 PM   #19
wachtelhund1
Senior Member
 
Join Date: January 4, 2007
Location: pelican lake, WI
Posts: 414
I've got a 100 carbine with a Nikon 4x40 scope, which is still my favorite deer rifle. Those are hard to find today. Today, I would go with a Vortex diamondback 2-7 35mm scope.
wachtelhund1 is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05574 seconds with 9 queries