The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old February 18, 2010, 02:20 AM   #1
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,884
Old Brazil Mausers in 30-06: how strong are the chambers?

Have heard about these, and that some were supposedly built in the 1880s and converted to 30-06 in the 1940s or 1950s.

Already have read that original Spanish/Latin American Mausers (designed for pressures of the 7mm round) can be at the engineering design limits when converted to .308.

Have also read that some post WW2 Brazilian conversions to 30-06 were done with steel which was hard but brittle. Were all conversions to this caliber done after WW2, or were some done in the 30s or early 40s?
Ignition Override is offline  
Old February 18, 2010, 11:47 AM   #2
olyinaz
Senior Member
 
Join Date: February 24, 2009
Location: Arizona
Posts: 877
If it's on a Mauser 98 action I don't see how there could be any issue. Which model are you speaking of?

Oly
olyinaz is offline  
Old February 18, 2010, 12:09 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
Brazilian Model 1907 and later rifles were built on Mauser 98 actions, and are plenty strong. Many of these rifles were converted to 30-06 in the 1950s after the USA brokered a peace deal in South America and agreed to supply military hardware and supplies.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old February 19, 2010, 02:38 AM   #4
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,884
The buddy who (lives three hours from here) will loan it to me for quite a while says that it was manufactured as a muzzle loader in the late 1880s, but I have no idea from where he received his information.

My question is - if the conversion to 30-06 Was done by the Brazilians - what type of action they used in it.
Maybe they were designed for the US Springfield rifles and some were sold to Brazil during or after WW2?
Ignition Override is offline  
Old February 19, 2010, 02:40 AM   #5
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
Brazil did not use Mausers before 1894, and most of those were removed from service before WW2 so they may not have been rebarreled. Model 1907 was the first Mauser Brazil issued (M98 variant).

Before Mausers, many South American armies used Comblain rilfes, but I doubt even the most sun-addled infantryman would opt to fire a Comblain rebarreled for 30-06. I have seen Remington Rolling Blocks chambered in 7X57 and 30-06, but I am not sure if Brazil had any of them in their arsenal.

A picture is worth a thousand words.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old February 19, 2010, 03:53 PM   #6
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,884
Thanks gents.
When I drive down in a few weeks to pick it up, will learn much more about it.
Ignition Override is offline  
Old February 10, 2012, 03:10 PM   #7
landlord
Member
 
Join Date: February 4, 2012
Posts: 71
I have one of these rifles and need a couple parts. mine is a 08/34 .30 I will post pics as soon as I figure how.
landlord is offline  
Old February 10, 2012, 08:25 PM   #8
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
FWIW, there just might be some confusion somewhere, and it might be an Argentine 1909 7.65 Mauser (98) rechambered to .30-06, a common practice in the 1950's, when cheap milsurp rifles were plentiful, but gennie ammo unobtainium.

BTW, some of the world's finest custom sporting rifles have been built based upon military 1909 Argies - it's the only military rifle issued with a hinged floorplate, AFAIK.

.
PetahW is offline  
Old February 11, 2012, 07:10 PM   #9
landlord
Member
 
Join Date: February 4, 2012
Posts: 71
heres the pictures of my brazilian .06 and some of my 98 that was sported even thought its all matching numbers, was like that when I got it.
Attached Images
File Type: jpg Rifle 006.jpg (224.0 KB, 322 views)
File Type: jpg Rifle 007.jpg (233.7 KB, 242 views)
File Type: jpg Rifle 008.jpg (228.2 KB, 240 views)
landlord is offline  
Old February 11, 2012, 07:59 PM   #10
landlord
Member
 
Join Date: February 4, 2012
Posts: 71
the receivers look the same and the bolt seems to fit both of them, does that mean I got get a 98 8mm bolt and have it work in the .06?
Attached Images
File Type: jpg Rifle 009.jpg (244.3 KB, 184 views)
File Type: jpg Rifle 010.jpg (244.3 KB, 159 views)
File Type: jpg Rifle 011.jpg (243.7 KB, 156 views)
landlord is offline  
Old February 11, 2012, 08:48 PM   #11
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 7,477
What you have is a Brazilian made Model 1908 rifle version.
Most of the 1908's were made in Germany by DWM and they're famous for their quality.
Later on, Brazil started making the rifles in Itajuba, and the quality wasn't as good.
By quality I mean the fit and finish, not the strength.

Originally, the Brazilian 1908 was chambered in the 7mm Mauser.
Later, rifles were reworked to 30-06 rifles because we gave them large quantities of surplus ammo.
Yours is one of the re-works.

In order to convert to 8mm Mauser you'd need a new 8mm barrel correctly fitted and head spaced, not a new bolt.
If you have a 30-06 rifle that needs a new bolt for some reason, you'd have to have the rifles head space checked and possibly the barrel re-set to correct it.
You SHOULD NOT just buy a bolt and put it in. The head space can be off enough that you could have an exploding rifle near your face.
The only way to know is to have a gunsmith check it with a head space gauge.

The later Itajuba rifles were more or less interchangeable with parts from the earlier DWM made rifles. Note that as always with old guns parts may need adjusting to fit and function correctly, and some parts may not work in some rifles due to wear of the rifle and the replacement parts.

For parts for your rifle, you can buy DWM Model 1908 or Itajuba 1908 parts, or in many cases, almost any large ring Model 1898 Mauser rifle variant parts can be used.

Here's sources for parts:

http://www.gunpartscorp.com/catalog/...aspx?catid=313

http://ssporters.com/
Dfariswheel is offline  
Old February 12, 2012, 01:25 AM   #12
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
I think I can pretty well guarantee that no one converted a muzzle loader to .30-'06, or if he did, I don't want to fire it.

Jim
James K is offline  
Old February 12, 2012, 03:57 PM   #13
landlord
Member
 
Join Date: February 4, 2012
Posts: 71
my rifle is a Itajuba so the bolt from a 98 would fit if the head space is right?
landlord is offline  
Old February 12, 2012, 08:43 PM   #14
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 7,477
This totally depends on the bolt and rifle.
98 Mauser bolts are the same design, but different manufactures will have slight differences and may not fit or operate correctly.

Even the same make of bolt may tend to bind in an action, and bolts with worn parts may have problems with the safety not working correctly or the trigger not functioning correctly.

If possible buy a bolt made for the Brazilian 1908 rifle or your Itajuba version.
A gunsmith can make sure it fits and function properly, and check and if necessary re-set the head space.
Dfariswheel is offline  
Old February 12, 2012, 09:36 PM   #15
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
In short - NO bolt, that you'd install in existing action (no matter how close a match), should be considered a "drop-in" - even if it will actually slide in/close.

.
PetahW is offline  
Old February 13, 2012, 11:52 AM   #16
landlord
Member
 
Join Date: February 4, 2012
Posts: 71
just want to make sure I was understanding everything so I made sure I was going to be safe, thank you for helping. my gunsmith is only around four hours a day and I havent been able the catch time with him yet.
landlord is offline  
Old February 17, 2012, 01:08 AM   #17
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,884
This was a tentative (possible) gift, but the possibility ended back in 2010.
That's why this thread was forgotten and no other response was added.

I lost track of the owner back in '10 (seldom went near Starkeville), and I never acquired the rifle.
Your responses are appreciated.
Ignition Override is offline  
Old December 2, 2012, 01:46 PM   #18
hoss2244
Junior Member
 
Join Date: February 8, 2012
Posts: 5
so will any mauser 98 firing pin work in the 08/34.30 and what size barrel will work
hoss2244 is offline  
Old December 2, 2012, 05:35 PM   #19
Pukindog
Member
 
Join Date: December 10, 2009
Posts: 90
hinged floorplate

I just read this thread and I am repling to the post about the Argentine 1909 Mausers with a hinged floorplate. Beg to differ, but the 1904/39 Portugese also has a hinged floorplate.

Jeff
Pukindog is offline  
Old December 2, 2012, 07:42 PM   #20
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 7,477
so will any mauser 98 firing pin work in the 08/34.30 and what size barrel will work

"Most" Model 98 firing pins will work, but again, there are minor differences that may cause problems.

Most Model 98 Mauser's used the same barrel threads, but again, there are some exceptions.

Bottom line is, you have to know something about the various Model 98 actions.

If you intend to have a Mauser re-barreled to a cartridge not original to your specific model, you have to do some research to figure out what cartridges are compatible with that action.
As example, most rifles will need work on the magazine box and possibly feed ramp to allow using the longer 30-06 cartridge but usually work okay as-is with the .308
Dfariswheel is offline  
Old December 3, 2012, 05:51 AM   #21
F. Guffey
Senior Member
 
Join Date: July 18, 2008
Posts: 7,249
Landlord, the stamp on the right side of my actions front receiver does not read 08 they read 30-34 as in 30 Cal. converted in 1934, the rifle is unique and different and by some claimed to be suspect. I purchased 5 for $25.00 each, case bodies were still in the chambers of a few, no case head. Because I was informed they were suspect I used one barrel and one bolt to test fire all the receivers, switching receivers with one barrel and one bolt amounted to .001” difference in chamber length, the barrel was a Belgium commercial barrel chambered to 30 Gibbs with .110 case head protrusion. I used the configuration to form cases for the 30 Gibbs.

Suspect? the magazine is longer than the 98 type Mauser magazine, the floor plate is longer than the 98 floor plate, not necessary but when the rifle was configured the opening was increased by removing metal from behind the lower lug and that is the reason for the label ‘suspect’.

I am not the fan of fillers, I do not use Wheaties, Cheerios or grits (I like grits) I use a load that is going to form the case the first time I fire it. Because ‘time is a factor I used an ‘overload’, friends said “that is some scary stuff”, then there is the rust and pits on two of the receivers, still pondering what direction to go,

Barrels, the bores are a waste, but the chambers? Perfect chamber gages, with 62 chamber reamers I can not miss, the barrel chamber makes a different chamber gage than the ones sold on the Internet.

Forgot, there was nothing suspect about the receivers.

F. Guffey
F. Guffey is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.10689 seconds with 11 queries