winchester super x1 info - Page 2

FITASC · February 2, 2017, 07:02 PM

Not at all; that stock wasn't installed by some yahoo in his garage

Blindstitch · February 2, 2017, 07:52 PM

Isn't that just an adjustable stock plate holding he recoil pad? Why would anyone consider that bubba work.

stuckinthe60s · February 2, 2017, 09:30 PM

it may be a graco hydacoil system. it like some other names like soft touch, compress when fired.
coupled with that adjustable comb, it may be as much as the cost of the gun.

FITASC · February 3, 2017, 07:39 AM

Gracoil, Counter Coil, Bump Buster, Soft Touch are all names of units like that and typically run about $800+ to buy and have installed. Even a simple ISIS system is $750

Virginian · February 3, 2017, 01:59 PM

Numrich has a replacement stock for about $80 if you're interested. Should be able to see the one that's on it for quite a bit more than that.

EnoughGUN · February 5, 2017, 10:05 PM

Update.

Well the stock for a giant is gone. I bought a "new old stock" Winchester stock. It's a much nicer wood 3x fancy grade I believe. The new stock fits me perfect. I shoulder it and my sight line is straight and lever down the rail. I'm leaving the rest of the gun alone. I thought about a recoil reducer but I've shot seven rounds back to back and it hasn't bothered me yet.

Side note. I found a vintage superposed in a LGS and really wanted it but it in the worst way. I could not make it fit the rail is so low. I tried several newer Chinese made Citori and they fit fine. I'm pretty disappointed, it was a beautiful gun.

FITASC · February 5, 2017, 10:14 PM

It's not a "rail", it is a rib. Citoris are made in Japan, not China.
The stock dimensions for Citoris and Superposeds should be the same.

EnoughGUN · February 6, 2017, 03:05 PM

Good to know but not really relevant to issue
Also good to know but not important
Apparently they are not

stuckinthe60s · February 6, 2017, 07:31 PM

too bad I didn't know you a week earlier. I know someone who could use the old sxm1 stock you took off.

February 2, 2017, 07:02 PM	#26
FITASC Senior Member Join Date: December 6, 2014 Posts: 6,446	Not at all; that stock wasn't installed by some yahoo in his garage __________________ "I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa

February 2, 2017, 09:30 PM	#28
stuckinthe60s Senior Member Join Date: January 31, 2017 Location: Va., Ct., Mo.. Posts: 877	it may be a graco hydacoil system. it like some other names like soft touch, compress when fired. coupled with that adjustable comb, it may be as much as the cost of the gun. __________________ Retired Military Aviation Former Member Navy Shooting Team Distinguished Pistol Shot,NRA Shotgun/Pistol Instructor NSSA All American, Skeet/Trap Range Owner

February 3, 2017, 07:39 AM	#29
FITASC Senior Member Join Date: December 6, 2014 Posts: 6,446	Gracoil, Counter Coil, Bump Buster, Soft Touch are all names of units like that and typically run about $800+ to buy and have installed. Even a simple ISIS system is $750 __________________ "I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa

February 3, 2017, 01:59 PM	#30
Virginian Senior Member Join Date: February 11, 2012 Location: Williamsburg, Va. Posts: 1,528	Numrich has a replacement stock for about $80 if you're interested. Should be able to see the one that's on it for quite a bit more than that. __________________ What could have happened... did.

February 5, 2017, 10:05 PM	#31
EnoughGUN Senior Member Join Date: May 20, 2009 Posts: 538	Super x Update. Well the stock for a giant is gone. I bought a "new old stock" Winchester stock. It's a much nicer wood 3x fancy grade I believe. The new stock fits me perfect. I shoulder it and my sight line is straight and lever down the rail. I'm leaving the rest of the gun alone. I thought about a recoil reducer but I've shot seven rounds back to back and it hasn't bothered me yet. Side note. I found a vintage superposed in a LGS and really wanted it but it in the worst way. I could not make it fit the rail is so low. I tried several newer Chinese made Citori and they fit fine. I'm pretty disappointed, it was a beautiful gun. __________________ GLOCK Austrian for Lemming Last edited by EnoughGUN; February 5, 2017 at 10:11 PM.

February 2, 2017, 07:52 PM	#27
Blindstitch Senior Member Join Date: April 14, 2013 Location: Milwaukee, Wisconsin Posts: 2,693	Isn't that just an adjustable stock plate holding he recoil pad? Why would anyone consider that bubba work.

February 5, 2017, 10:14 PM	#32
FITASC Senior Member Join Date: December 6, 2014 Posts: 6,446	It's not a "rail", it is a rib. Citoris are made in Japan, not China. The stock dimensions for Citoris and Superposeds should be the same. __________________ "I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa

February 6, 2017, 03:05 PM	#33
EnoughGUN Senior Member Join Date: May 20, 2009 Posts: 538	Sx1 Good to know but not really relevant to issue Also good to know but not important Apparently they are not __________________ GLOCK Austrian for Lemming

February 6, 2017, 07:31 PM	#34
stuckinthe60s Senior Member Join Date: January 31, 2017 Location: Va., Ct., Mo.. Posts: 877	too bad I didn't know you a week earlier. I know someone who could use the old sxm1 stock you took off. __________________ Retired Military Aviation Former Member Navy Shooting Team Distinguished Pistol Shot,NRA Shotgun/Pistol Instructor NSSA All American, Skeet/Trap Range Owner