|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
July 9, 2020, 10:04 AM | #1 |
Junior Member
Join Date: July 9, 2020
Posts: 1
|
Winchester SXP Defender Trigger Group assembly Problems
Hi everyone, this is my first post in the forum, i hope i can post more in the future about updates and range reports if i can find more time for it.
I got a brand new Sxp defender with 20" barrel and 7 capacity magtube with fixed choked slug barrel couple days ago and yesterday i tested it with 28-34 grain slugs without any problem,i shot 150 rounds( approximently ) Only issue that i experienced the 20" barrel likes 32gr and above slug loads for accurate shots, anything lower than 32gr can shoot 5 to 10 inches high at 40 yards. 32gr and above are dead accurate at the same distance. After first range visit, i noticed that the trigger group is slightly loose and it wobbles When i grip the trigger guard i can wiggle the assembly side to side when the bolt closed/foward position. Also whole trigger group can play side to side when its dissassembled, that i tried to show in the second video. It functions without any problem rightnow , but i am not sure how its gonna play in long term use and after higher round counts, For videos; 1-https://youtu.be/xVoj1MTh5dY 2-https://youtu.be/T4_xvCk-syg Thank you. Last edited by heat338; July 9, 2020 at 12:32 PM. |
July 11, 2020, 07:57 PM | #2 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
Are you in a location where you can order or try these? https://www.brownells.com/shotgun-pa...prod20694.aspx That's about the onliest fix I can think of.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
Thread Tools | Search this Thread |
|
|