|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 18, 2009, 07:13 PM | #1 |
Senior Member
Join Date: February 22, 2009
Posts: 613
|
ATTN Max 100, other MOSSBERG people
Do you know of anyone that makes or modifies and sells mag tubes that fit flush in an 18.5" 500? It may be cheaper than getting another A1 and extension for my new project gun.
|
November 18, 2009, 11:23 PM | #2 |
Senior Member
Join Date: February 28, 2008
Location: SC- at the GUN-CONNECTION
Posts: 359
|
The barrel ring will have to be relocated higher up with a longer mag tube. I don't know anyone that makes one for that reason.
GC |
November 18, 2009, 11:39 PM | #3 |
Senior Member
Join Date: February 22, 2009
Posts: 613
|
forgot about that, youre right...ugh.
|
November 19, 2009, 03:21 PM | #4 |
Senior Member
Join Date: February 28, 2008
Location: SC- at the GUN-CONNECTION
Posts: 359
|
Sell the 500 if you don't like it the way it is. There is no need to spend a lot of extra money trying to change the mag tube setup on the standard 500 when you can purchase a 18.5" barrel 590A1.
GC Last edited by MAX100; November 20, 2009 at 03:16 PM. |
November 19, 2009, 05:45 PM | #5 |
Junior Member
Join Date: November 18, 2009
Location: UT
Posts: 9
|
mossberg 500 w/ 20" barrel
Mossberg makes a 500 with a 20" barrel with the 7 round factory mag (so that's 7+1)
You won't be able to switch our the barrel because of the position of the ring, but it puts the ring right at the end of the 20" barrel, hence the long factory mag I got mine at Big 5 a couple months ago for about $270 + background check + taxes (plus some ammo, making it a total of about $312 out the door I think). Screaming good deal and I'm very happy with it. It's item no 50577 I think in the mossberg catalog |
November 19, 2009, 06:48 PM | #6 |
Senior Member
Join Date: February 22, 2009
Posts: 613
|
this is going to a pgo gun. The 20" is too long for that purpose imo. greast shoulder mounted, comical on a pgo. I'm going to have shell out the 3 or 400 smackers on a used or new 590a1, which still isn't a bad deal.
|
November 19, 2009, 09:23 PM | #7 |
Senior Member
Join Date: April 29, 2008
Posts: 177
|
You can also get a Mossberg 20 inch bbl and 7 round mag tube for 150 bucks from Brownells.It has rifle sights with the rear being adjustable.Too bad it is One and a half inches too long,even though any benefit of a bbl that is 18.5 instead of twenty exists only in your fertile imagination
|
November 20, 2009, 07:00 AM | #8 |
Senior Member
Join Date: February 22, 2009
Posts: 613
|
I feel it's too long for my pgo project but that's pretty cheap for that kind of a barrel and tube....gets me thinking of another project I wanted to do...20 inch 8-shot 500 w/ rifle sights on one of those wood stock sets you come across on Havlin, with nice deep fine custom rebluing on the receiver and maybe even over the new bluing on the barrel and tube. would be pretty for sure...
|
|
|