|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 24, 2018, 04:51 PM | #1 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
Savage 110 Bolt Head Allignment Slot
I am getting ready to reassemble my new bolt head, spring, friction washer and retaining pin to my old bolt. The old bolt has an alignment pin that alugns the old bolt hed. Newer bolts do not have this feature. I have read where people are milling the pin out of the bolt to fit the new head without a slot. I could do either but eliminating the pin is probably easier. Do I need it or not? What say you Mr. Smith?
|
January 25, 2018, 08:19 PM | #2 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
Do you mean the large pin that holds the head to the bolt?
Otherwise i know of no other pin. There is a raised "ridge" on part of the bolt head that aligns it in the receiver. |
January 25, 2018, 10:31 PM | #3 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
It doesn't matter any more. I had it machined.
|
Thread Tools | Search this Thread |
|
|