|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 5, 2022, 04:10 PM | #1 |
Senior Member
Join Date: May 24, 2009
Posts: 405
|
Maverick 88 stock loose?
I just bought a new Maverick 88 security, took it out and fired about 20 rounds of slugs and buckshot and it shot and functioned great. However after cleaning and tightening the barrel nut back on, I noticed the stock moved slightly. This is a brand new gun and the stock is loose, could this be a defect or normal? what type screwdriver removes the pad, should I use blue loctite on the bolt and what size is the bolt in the stock? Thanks for any help.
|
August 5, 2022, 08:54 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Should be a 1/2" bolt, and tightening it should be enough without LocTite.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
August 5, 2022, 09:56 PM | #3 |
Senior Member
Join Date: November 4, 2013
Location: Western slope of Colorado
Posts: 3,679
|
It takes a phillips to take the pad off, then a long flat tip screwdriver to tighten the stock screw.
|
|
|