The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools Search this Thread
Old January 31, 2010, 01:46 AM   #1
simoncrk
Member
 
Join Date: January 31, 2010
Location: OKLA
Posts: 19
Im a new guy here. Long Range Shootin questions

Hey guys.
Just joined this site and already like it!!! Ive got some questions about long range shootin. Ive gotta Rem 700 in .308, Mcmillian A4 stock glass bedded, 20'' BBL and Badger Ord. Mag feed. I built some targets that are 1" thick and 18" x 18". one set at 100yds for zero, next is 262yds and the 3rd is at 660yds. Im havin trouble hitting the 660. Im reloading w/ RCBS R.C. IV, RCBS comp. dies. 168 gr. Sierra, RL15 @ 43.5 gr and fed primer w/ Win. Brass. FPS averages 2655. Im wonderin if its the loads or me (the shooter) does anybody have any suggestions?
simoncrk is offline  
Old January 31, 2010, 02:14 AM   #2
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
What distance are you sighted in for? What kind of groups are you getting, off a bench, at 100? You don't want to be using an 18" target at 100.
Factory 168 grain bullets with close muzzle velocities drop about 50 inches at 500. Isn't easy to hit 18" at 500, never mind nearly 700.
You may want to change powders. IMR4064 gives excellent and consistent accuracy with 168 grain match bullets.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old January 31, 2010, 02:25 AM   #3
simoncrk
Member
 
Join Date: January 31, 2010
Location: OKLA
Posts: 19
Zero at a hundred. With quarter inch grouping. I still haven't figured out what people are talking about when they say Sub MOA when refering to grouping. I've never been to a match. Im just doing this for a hobby not competition. But I still want to learn the terms and what they mean. I understand MOA's and and I know how to adjust the 1/4 MOA's for distance on the scope. I will try the powder you suggested. By the way my scope is a Leupold Mark IV 4.5 x 25 50 mm, I know its a higher power scope than I need, but I made a good purchase on it and couldn't pass it up.
Sorry about the spelling. Kinda tired.
simoncrk is offline  
Old January 31, 2010, 04:53 AM   #4
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
Hi. One minute of angle(MOA) is 1" at 100 yards(isn't using math, but it's close enough), 2" at 200, etc. Your 1/4" group at 100, aside from being outstanding(well done), is a 1/4 Minute Of Angle group. So a Sub MOA group means less than 1" at 100, less than 2" at 200, etc.
"...how to adjust the 1/4 MOA's..." Means one click on the adjustment screw moves the cross hairs 1/4" at 100. So if you need to move 'em an inch, in any direction, at 100, it's 4 clicks per inch. Two clicks per 1/4 inch at 200, etc.
Now, where is the group at 100? Dead on at 100? This is where ballistics raises its ugly head. Sighting in 4" high at 100 should put you on target out to about 300.
Remington factory 168 grain match ammo(MV is a bit higher than your's. 2680 fps. It'll give you a place to start.) is 2.1" high at 100, on at 200 and 49.9" low at 500. The Remington Match ammo drops like a brick between 300 and 400. 8" to 24". Factory ballistics isn't a great comparison to handloads, give you an idea though. You need to aim higher for a 660 yard shot.
There are on-line ballistics calculators. Don't actually trust 'em myself. I'm a computer technician. Don't trust programmers to do anything right the first time.
"...a hobby not competition...I've never been to a match..." Shooting competitions is a hobby. Go to a match. It's great fun and nobody will laugh at you. Shooters just don't do that. You're shooting against yourself anyway. Most shooters will bend over backwards to help you. You'll meet a great bunch of people too. Joining a shooting club is a good idea as well. Opens a lot of doors.
"...know its a higher power scope than I need..." It's also what you have. Especially when the price was right.
"...Sorry about the spelling. Kinda tired..." You're spelling is fine and I'm kind of drunk. I can edit my typing even when drunk. If you saw what I type before editing, you'd laugh yourself silly.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old January 31, 2010, 10:08 AM   #5
4EVERM-14
Senior Member
 
Join Date: November 12, 2006
Location: Pennsy
Posts: 720
T O'Heir made a lot of good points. Even if he said he was stiffed. Competition is really not just a win/ lose proposition. It's a social event. People out to enjoy some shooting fun, talking guns,jokes, sharing tips. This is where you can really learn hitting targets at distance. You have a setup for a nice casual F-class. See if a local club has a small match to get into.
Your scope can be a key to improving your longer range hits. Note the settings at ,say, 100 yards. This can be used as a base from which to move forward. Returning to this setting should always allow center hits at 100 yards. Moving the elevation 3minutes up [12 clicks? depending the scope] should put your shots close to center at 200 yards. Another 14 0r 16 clicks[3-4 minutes] for 300 yards. Your values may differ but write the scope settings down. These should repeat if the same ammo is used. Keep a diary of scope settings. You'll start to become one with the gun.
__________________
David
NRA Benefactor Member
Distinguished Rifleman #731
Presidents 100
4EVERM-14 is offline  
Old January 31, 2010, 12:14 PM   #6
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
I don't know about your load, but if it shoots 2 moa at 100 yards chances are its not the gun or load.

When you get to 600 yards (I think 660 years is like 600 meters, Being an American I dont use meters).

Anyway, anyone can slope them in at 2-300 yards, but when you get to 600 yards or so, wierd things tend to happen, Wind, Mirage, Light, Heat, etc. Your conditions at 100 yard may or may not be whats happening at 600 yards or anywhere between 100 & 600 yards.

Go to Sears or someplace and get a large appliance box to make a target backing for you 18 x 18 target. It dosnt do any good to know that you missed. You need to know where the bullet went when you missed.

A 5 mph wind on your load will move the bullet about 3 MOA. That means 18 inches at 600 yards. That dosnt give you a lot of room to play on an 18 in sq target. The problem is can you tell the differance between a 5 MPH wind and an 8 mph wind when that wind on your target is 600 yards away. An 8 mph wind will move your bullet about 29 inches.

When you zero at a 18 in target, you are zeroed at the center, meaning you have 9 inchs to play with. It dosnt take much of a breeze to move a bullet 9 inches at 600 yards.

The load you are using is pretty close to the M852 Match load used in HP matches. If you can determine the wind speed, its simple to figure the corrections needed.

C= W x R / 10. C = 1 min clicks, W = wind speed, R = 100 yards, 10 is a constant (for that load) Example C = 5 mph wind, R = 6 for 600 yards, divided by 10, the constant. So C will be "3" one min. clicks, or at 600 yards ( 3X6= 18 inches)

I hope I explained this good enough, I coach better then I write. But you can get the ideal, I don't think its your gun or ammo thats causing the problems.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Old January 31, 2010, 01:37 PM   #7
simoncrk
Member
 
Join Date: January 31, 2010
Location: OKLA
Posts: 19
Hey guys
I just got back online and seen what all ya'll posted!!!!!!!!!
Just want to say thanks!!!!!!!! ALOT!!! Im gonna print this off and take it to the shop... I live in Southern Ok do any of you know of matches in the area?
and what size target do people normally shoot at out to 660 yds. The reason I made mine 18" X 18" is I want to shoot a wild hog at this distance and figured better not go no bigger than that. Ive also got a Barrett model 95 .50 BMG and want to do the same. the cardboard box behind it sounds good as well, that way I can tell where it hits, if not the target. And when shootin this far Ive found havin a spotter helps. But I can't get my wife to do it all the time. LOL
simoncrk is offline  
Old January 31, 2010, 02:10 PM   #8
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
I didnt notice the Oklahoma part. I've shot high power matches in OK. You are talking humid, and I dont think there is such a thing as calm winds in OK.

Mirage is what you have to deal with. You look through a spotting scope, it's gonna look like you are shooting through a swiming pool. You dont need a spotter to tell where you hit, you need a spotter to tell you whats happening in ref. to the mirage.

Fire up your spotting scope and go to a High power or F-class match. Get behind a shooter and see what the mirage does to his bullet. Focus the scope at a point about 2/3s down range. NOT ON THE TAGET. That will allow you to read the mirage at the target.

Its not just wind and mirage, it temps. also. On 308 target rifle each 10-15 degree temp change is going to change you zero 1 moa, or 6 inches at 600 yeards (6 2/3 inches at 660 yards).

I never hunted hogs, but from what I understand they arnt very big. A bit smaller then a deer. It isnt gonna take much wind (or mirage which shows wind movement) to take you plum off target.

Just my opinion, but I would recommend you put the 50 cal aside, load up or buy a poop load of 308s and go to an F-Class of High Power match and get a bit of practice shooting mid range (600 yards).

I'm not a fan of long range hunting. I've been shooting high power and 1000 yards matches for over 30 years. I limit my hunting to 300 yards. I know what a little miscalculation does at 600 yards. A miss is one thing, a gut shot critter crawling off to die a painful death in not my ideal of hunting.

JMHO.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Old January 31, 2010, 02:24 PM   #9
simoncrk
Member
 
Join Date: January 31, 2010
Location: OKLA
Posts: 19
I do agree with you on the crippled critter subject. I dont want to do that, But the hogs are so bad on our place, they have completely destroyed three hay pastures and rooted up four bermuda pastures. Along with my wife hit one in her pickup a half a mile before the ranch gate that goes to the house. $3200 damage. They are so bad theyve rooted up the bar ditches along the highway. And Im afraid someones gonna swerve to miss one and wind up in a bad accident. That happened about 6 yrs ago and a guy died. he was thrown out and the car rolled on top of him. anyways im gettin off the subject. sorry bout that.
simoncrk is offline  
Old January 31, 2010, 04:01 PM   #10
4EVERM-14
Senior Member
 
Join Date: November 12, 2006
Location: Pennsy
Posts: 720
Reading conditions beyond 400 yards can be an art form. Every good shooter has his own formula. Wind, mirage, temperature ,humidity and a slew of other unknowns conspire to challenge the shooter. It's why it is said that "Todays zero is Todays' zero". The conditions yesterday might look the same but it's no guarantee. It is important to have range zeros in calm conditions. Usually in the morning ,before the sun has a chance to warm thing up, is the best time. If you can get reliable elevation zeros for various distances it will be one part of the puzzle and a confidence builder. A cardboard refrigerator box as a target backer is also a good idea.
Kraigwy is right about setting up behind a shooter and watching the conditions. It's amazing to see how the wind and mirage make bullets dance.
I'm guessing but if the vitals of a hog are around 20 inches that is about the '9' ring on a Conventional Highpower 600yd target.
__________________
David
NRA Benefactor Member
Distinguished Rifleman #731
Presidents 100
4EVERM-14 is offline  
Old February 1, 2010, 03:54 PM   #11
hagar
Senior Member
 
Join Date: February 20, 2000
Location: Colombia, SC
Posts: 745
You may be better of going to a 175 Sierra or 178 AMax with that 20 inch barrel. The 168 Sierra is not a long range bullet, I have tried shooting them at 800 yards out of a 26 inch barrel rifle behind a HOT load of Varget, and they went subsonic and hit the target sideways.
__________________
I don't have time for busy people
hagar is offline  
Old February 11, 2010, 04:33 AM   #12
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,308
come ups at 600 appx

A quick glance at a table yields that to come up from a 100 yd zero to 600 , you will need maybe 16-18 inches (MOA) of up adjustment from your 100 yd zero. That's in the neighborhood 60-70 +/- clicks if your Mk4 has 1/4 clicks (NICE scope BTW) , I don't know, the Mark 4's have different adjustments available.

ANY wind is not your friend.

For conversations sake, your mid range (height above line of sight) will be over 3 feet, ie, from a 100 yd zero, clicked up to 600.....at 300 you will be 3 ft+ high!!!!

Looks like you are getting coached by guys a lot sharper than me, bet you'll get on target soon.

There's some useful stuff on line about judging wind, I'll look for the site and try and get back.
bamaranger is offline  
Old February 11, 2010, 03:10 PM   #13
tkofoid
Senior Member
 
Join Date: October 10, 2008
Location: N. D.
Posts: 149
you should have to change your load

I use the same charge load of re15 as you. I get1/2 groups at 200 yards with it in my remmy. Get an absolute 100 or 200 yard zero and practice,,practice ,,,, practice,, before moving unto 600 yards. You simply must know where your bullet is going to hit at any given yardage. The Hornady has site has a 'ballistic calculator' where you can input info as to BC and velocity. One can print out the results and use it as a cheat sheet at the range...Good luck!
tkofoid is offline  
Old February 11, 2010, 03:26 PM   #14
Buzzcook
Senior Member
 
Join Date: November 29, 2007
Location: Everett, WA
Posts: 6,126
Get a bigger target.

On my best day (and that was several years ago) I was getting 10" groups at 600yds, shooting prone. But if I didn't have a big target (4'x4') and plenty of ranging shots to walk in, I doubt I would have gotten most of my shots on the target.
Buzzcook is offline  
Old February 19, 2010, 11:01 PM   #15
Viper225
Senior Member
 
Join Date: September 20, 2009
Location: SC Missouri
Posts: 663
You seem to have a good setup. The 8.5 X 25 50mm Leupold is not to much scope. I hope you have the M1 Knobs on the scope to dial with. NOTE: If you do not have M1 Knobs you can send it to Leupold and have them installed. They can also put in a TMR Reticle if you do not have one already. Handy for Hold Over and Range Finding with the scope.

You have very good advice above. Get an exact 100 yard Zero. Make sure 100 yards is 100 yards, and not sorta close. Measure it! You need a Harris Swivel Bipod with a Pod Loc. If you order one new get the Notch Leg version. You also need a Rear Sand Sock for the butt elevation. About soda can size filled with beaney baby fill is about perfect. I have a new design we have available for our sniper school that is Brick shaped 3" X 4" X 5" depending on how you position it. You need a Log Book with a Drop Chart and a Wind Chart. If your scope is equipped with a Mil Dot, or TMR reticle and you would like to practice Optical Range Finding a MIL DOT Ranging Chart and Table of Known Objects is handy also.

Drop Chart. For your velocity with a 168 gr bullet you should Dial In approximately 18.50 MOA of elevation at 660 Yards.

In Oklahoma Wind is a real problem. I have shot at Bad Lands with the grass laying over 3 directions between you and the target. That is a problem.

Bad Lands Tactical Training Center is located at Grandfield, OK. That is South of Lawton and go West on 70. I am not sure if Bob is still holding matches or not. I went to his Sniper School a few years ago, and shot one match, but I have not shot down their in a while. Great guy and a nice place to shoot. Bob had a prefered motel in Wichita Falls Texas with a discount for match shooters. It looked like a SWAT Convention at the motel that weekend. I had a great time. Do a web search for Bad Lands Tactical Training Center.
If you could use some help with charts etc contact me.

We hold a Sniper Match and a Multi Range F Class Match alternating Monthly in South Central Missouri.
http://bigpineysportsmanmsclub.com/ for info

Bob R.
Viper225 is offline  
Old April 5, 2010, 04:19 PM   #16
TheNatureBoy
Senior Member
 
Join Date: September 6, 2007
Posts: 1,204
I have a 7mm Rem Mag Sendero that I use as a target rifle. About two weeks ago I shot at a 400 yard target for the first time doing exactly what kraigwy suggested. I had tried it once before using one of those for sale signs that you see in front of homes with a "14x"14 target taped to it. I don't know where I was on the target; never hit it. Shot right over the top of it but still..... I got a piece of '3 1/2 x '3 1/2 card board and taped a "12x
"12 Dirty Bird Splatterting Target to it and went to work. 1st 5 shot group averaged 7.304 in. and the second 5 shot group averaged 3.372 inches. First and second was about 2 inches left of the target but on the card board. I got tired of walking back and forth to my target so I took it back to 100 yards and adjusted up on the scope. Now its shooting 6 inches high dead center. The larger target backing gave me the feed back that I needed and I was able to make necessary adjustment. I was shooting a 168 grain Match King/65 grains of RE-22 by the way .
TheNatureBoy is offline  
Old April 5, 2010, 09:30 PM   #17
Zak Smith
Senior Member
 
Join Date: December 12, 1999
Location: Fort Collins, Colorado, USA
Posts: 2,682
For a 100-yard zero, this data should be very close
Code:
308 168SMK @ 2655
Z 100yd  1000'DA
RANGE  ELEV-  moa    mil     | WIND(10) moa   mil   RANGE
  25    1"    3.25   0.9mil  |   0"   0.25   0.1mil   25
  50    0"    0.50   0.1mil  |   0"   0.25   0.1mil   50
  75   -0"   -0.00  -0.0mil  |   0"   0.50   0.1mil   75
 100    0"    0.00   0.0mil  |   1"   0.70   0.2mil  100
 125    0"    0.25   0.1mil  |   1"   1.00   0.3mil  125
 150    1"    0.70   0.2mil  |   2"   1.00   0.3mil  150
 175    2"    1.25   0.4mil  |   2"   1.25   0.4mil  175
 200    4"    1.70   0.6mil  |   3"   1.50   0.4mil  200
 225    6"    2.50   0.7mil  |   4"   1.70   0.5mil  225
 250    8"    3.25   0.9mil  |   5"   1.70   0.5mil  250
 275   11"    4.00   1.1mil  |   6"   2.00   0.6mil  275
 300   15"    4.50   1.3mil  |   7"   2.25   0.7mil  300
 325   18"    5.50   1.6mil  |   9"   2.50   0.7mil  325
 350   23"    6.25   1.8mil  |  10"   2.70   0.8mil  350
 375   28"    7.00   2.0mil  |  12"   3.00   0.9mil  375
 400   33"    7.70   2.3mil  |  13"   3.25   0.9mil  400
 425   39"    8.70   2.5mil  |  15"   3.50   1.0mil  425
 450   46"    9.70   2.8mil  |  17"   3.70   1.1mil  450
 475   53"   10.50   3.1mil  |  20"   4.00   1.1mil  475
 500   61"   11.50   3.4mil  |  22"   4.25   1.2mil  500
 525   69"   12.50   3.7mil  |  24"   4.50   1.3mil  525
 550   78"   13.50   4.0mil  |  27"   4.70   1.4mil  550
 575   88"   14.70   4.3mil  |  30"   5.00   1.4mil  575
 600   99"   15.70   4.6mil  |  33"   5.25   1.5mil  600
 625  111"   17.00   4.9mil  |  36"   5.50   1.6mil  625
 650  123"   18.25   5.3mil  |  40"   5.70   1.7mil  650
 675  137"   19.25   5.6mil  |  44"   6.25   1.8mil  675
 700  151"   20.70   6.0mil  |  47"   6.50   1.9mil  700
 725  167"   22.00   6.4mil  |  51"   6.70   2.0mil  725
 750  183"   23.25   6.8mil  |  56"   7.00   2.1mil  750
 775  201"   24.70   7.2mil  |  60"   7.50   2.2mil  775
 800  219"   26.25   7.6mil  |  65"   7.70   2.3mil  800
 825  239"   27.70   8.1mil  |  70"   8.00   2.4mil  825
 850  260"   29.25   8.5mil  |  75"   8.50   2.5mil  850
 875  283"   30.70   9.0mil  |  81"   8.70   2.6mil  875
 900  307"   32.50   9.5mil  |  86"   9.25   2.7mil  900
 925  332"   34.25  10.0mil  |  92"   9.50   2.8mil  925
 950  359"   36.00  10.5mil  |  98"   9.70   2.9mil  950
 975  387"   38.00  11.0mil  | 105"  10.25   3.0mil  975
1000  417"   39.70  11.6mil  | 111"  10.50   3.1mil 1000
__________________
Zak Smith . DEMIGOD LLC . THUNDER BEAST ARMS CORP . COLORADO MULTI-GUN
My PM inbox full? Send e-mail instead.
Zak Smith is offline  
Old April 5, 2010, 11:34 PM   #18
Powderman
Senior Member
 
Join Date: September 7, 2001
Location: Washington State
Posts: 2,166
Lots of excellent advice in this thread.

Something else that can help is the use of a good friend as a spotter. You set them up right beside you, and have them focus their scope on a point about 3/4 of the way to the target--it should be a bit blurred.

If you are firing on a good day, you can actually WATCH the bullet's vapor trail as it heads down range. Your spotter can actually tell you almost exactly where the bullet goes.

And, it isn't hard to spot either. It's actually pretty neat--the vapor trail looks like a boiling finger of doom reaching out toward the target. Try it out!
__________________
Hiding in plain sight...
Powderman is offline  
Old April 6, 2010, 09:03 AM   #19
spitpatch
Senior Member
 
Join Date: August 31, 2009
Location: Arizona
Posts: 171
OK 1000 yd match

Check out the Tulsa Red Castle Gun Club web site. They have been having a couple 1000 yd matches a year.
Don't shy away from the competion, like another fella says it's more of a social event, you will learn so much more at a match than you will ever sitting in front of the computer.
spitpatch is offline  
Old April 7, 2010, 12:58 PM   #20
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
Quote:
Tulsa Red Castle Gun Club
I think I shot at their range in 1978. Took the AK NG to a High Power Match there in route to the Wilson Matches in Little Rock.

The problem I had was the target pullers, they hired HS Girls. The match director said boys goof off too much, boys and girls mean no target service. Just girls worked out much better.

They did a good job, the problem was it was quite warm and the girls were dressed...........shall we say "for hot weather". It was distracting to some of my young shooters.

Great match though.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11352 seconds with 8 queries