|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 6, 2005, 08:06 PM | #1 |
Senior Member
Join Date: April 23, 2005
Location: SC
Posts: 393
|
anyone familiar with the federal barnes triple shock bullet
it is a all copper bullet that spreads into 4 razor sharp rose petals upon impact there is NO lead but it is said to have just as much energy if not more than lead and there is no fragmentation.it would be used at the present time primarily for deer are there any advantages to being all copper and the fact that it rose petals instead of mushrooming
|
May 6, 2005, 10:56 PM | #2 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
I don't think you need all that much for deer but with larger animals it would be a good idea. The comments I've heard from those that have used it have been very favorable !
|
May 7, 2005, 10:10 AM | #3 |
Senior Member
Join Date: April 19, 1999
Posts: 567
|
Barnes copper bullets are designed for higher weight retention and deeper penetration. Being made out of one chunk of copper they aren't supposed to come apart (jacket seperated from lead core) when hitting something solid like a shoulder bone. But a solid copper bullet also wouldn't expand very much. Research came up with a method of manufacturing them to peel back into the four "petals" because there wasn't really any way of making them mushroom reliably, and the "X-bullet" was born. Being made out of solid copper, the interaction between the bullet and barrel was different than regular bullets, it required different loading techniques and there were/are claims of increased fouling. The Triple Shock took the X-Bullet and put grooves around the shank of the bullet, reducing the amount of contact between the bullet and barrel, thus reducing friction and fouling, and the possibility of increased velocity at the same or lower pressure.
The advertising for the Triple-Shock hypes three impacts (yeah right), first contact, the start of expansion, and full expansion of the "razor-sharp petals". Well, like most advertising claims, that's a little over the top. They are good bullets that penetrate deeply and hold together very well. Being a solid piece of metal, they are very stable in their rotation, but all premium bullets and most plain-jane bullets now have very concentric jackets and are well balanced bullets. The main thing is that they hold together while expanding reliably. The increase in penetration is due this. If a bullet breaks up, the loss of mass results in less momentum to keep the bullet moving through whatever it hits. As far as the razor sharp petals, it doesn't really matter if they are razor sharp or not. The petals increase the cutting/tearing as the bullet moves through the animal, probably very slightly more surface contact than a mushroomed conventional bullet, but due to their shape should "push" on through easier than a big flat surface. I don't know what stores are getting for the Federal ammo loaded with the Barnes Triple Shock, I haven't bought any factory ammo for any of my rifles for years. I have tried some loads using X-Bullets in a couple of rifles and was thinking about working up a load with the Triple Shock for my .300 WSM Savage. We do have big deer, both muleys and whitetails here where I hunt in Nebraska, but neither the .300 or super premium bullets are required, and won't kill them any deader than my .270. As a comparison, I use 140 grain Nosler Ballistic Tips in my .270, a bullet that a lot of people say breaks up too easily and doesn't penetrate. All but one of the deer I've shot with it had exit holes, most showing good but not excessive expansion. The one that didn't exit probably wouldn't have no matter what bullet I was using (175 yds., steeply quartering toward me with a cross wind, hit about 2" to the left of point of aim,clipped 2 ribs, completely took out one lung, passed most of the way diagonally through the body and most of the bullet lodged in a partially destroyed far side hip, deer dropped on the spot, dead when I got to it.) bergie |
May 7, 2005, 02:08 PM | #4 |
Senior Member
Join Date: May 19, 2004
Location: Wabash, IN
Posts: 227
|
While I haven't fired the factory Fed TSX rounds, I have handloaded the 168gr TSX in .308Win and have had great results with them. They are very accurate, don't copper foul the bore like some previous Barnes bullets did, and flat out did the job on a couple of wild hogs taken with them.
I highly recommend them, even though they ARE on the expensive side.
__________________
"Every moving thing that liveth, I give unto you as meat" (Gen 9:3) Aim small.........miss small. Trust God..........but keep your powder dry! |
|
|