October 15, 2013, 05:11 AM | #1 |
Junior Member
Join Date: October 14, 2013
Posts: 3
|
semi auto sten
I found in a local gun shop an open bolt semi auto sten made by skywalker arms. I have not bought it because i have never heard of open bolt stens nor skywalker arms. It has the short sten barrel extended with a welded piece of tube to make it 16ish long. Any info from my highly knowelagable friends here
|
October 15, 2013, 11:50 AM | #2 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
I've never heard of skywalker arms either. I would want to know more about the manufacturer and when it was made before buying it as well.
The open-bolt guns that were made pre '82 or thereabout, were not as easily convertible to full-auto as most would have you believe. For example, on the Demro/Wasp carbines, the fire control mechanism is sealed off and can't be modified without cutting the metal housing. On the open bolt Mac's the fire control parts can't be replaced with full-auto parts without milling/drilling the receiver. The problem was that folks figured out how to jam up the mechanisms to make the gun fire full-auto only. My point in saying this is that IF the Sten was made around the time that the open bolt guns were being manufactured, I'd look for something done by the maker to make it difficult for someone to simply swap out a few parts to make it go full-auto. And, I'd ask over on Sturmgewehr.com (if you don't get a good answer here) about the manufacturer. Lots of those guys know "who's who" in the NFA world going back into the '70's. |
October 15, 2013, 01:54 PM | #3 |
Junior Member
Join Date: October 14, 2013
Posts: 3
|
I absolutly agree. I dont want to buy it untill i find out for sure who made it and when. Trying to google search skywalker arms is like trying to find a needle in a stack of needles(saving private ryan) there are 100 billion hits that are for star wars and i just dont have the time to look page after page to get to them. The mechanisms are welded into semi auto and the cover is welded on so it would be a huge pain to make it full auto. I appriciate your help and hope others can shed some light for me on it. It is a jewel if i buy it, but its not worth the problems if it is not legit
|
October 15, 2013, 04:05 PM | #4 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
The only way to get a real answer (but one you may not like and won't win friends at the gun shop) is to contact BATFE. They will know the maker and will be able to tell you if the gun is a legal semi-auto. But if they say it isn't, then they can seize it (no compensation) which won't make the shop happy.
Jim |
October 15, 2013, 04:35 PM | #5 | |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
Quote:
|
|
October 15, 2013, 04:42 PM | #6 |
Senior Member
Join Date: May 15, 2011
Posts: 1,405
|
I find it curious actually. Skywalker Arms in conjunction with a Sten replica.
In the Star Wars movies, the first three, the "Blasters" that the Imperial Storm troopers used were slightly modified version of the Sten/Sterling SMGs. During this same time frame there were semi-auto rifle versions of these guns just like the old semi-auto Uzis with 16" barrels. I just wonder if someone in Hollywood decided it would be easy and cheap to convert some of these rifles to SBRs for the movie and then wield a barrel extesion back on for resale. If you did this as a Company called Skywalker Arms, would that not be the name that would have to be added to the weapon per NFA?
__________________
Colt M1911, AR-15 | S&W Model 19, Model 27| SIG P238 | Berreta 85B Cheetah | Ruger Blackhawk .357MAG, Bearcat "Shopkeeper" .22LR| Remington Marine Magnum SP 12GA., Model 700 SPS .223 |
October 15, 2013, 06:29 PM | #7 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Heck, if they can paint Lewis guns white, they can do anything!
Jim |
October 16, 2013, 10:16 AM | #8 |
Senior Member
Join Date: May 15, 2011
Posts: 1,405
|
Geochris, just to be sure, it's definitely a Sten and not a Sterling?
__________________
Colt M1911, AR-15 | S&W Model 19, Model 27| SIG P238 | Berreta 85B Cheetah | Ruger Blackhawk .357MAG, Bearcat "Shopkeeper" .22LR| Remington Marine Magnum SP 12GA., Model 700 SPS .223 |
October 17, 2013, 11:34 AM | #9 |
Junior Member
Join Date: October 14, 2013
Posts: 3
|
definatly a sten
It is absolutly a sten. No mistake. Stens can be made into sterlings i wonder how much cut amd welding would be permissable to make a sterling? I know the batf specifies how much you can do before it is just considered a new firearm. If nothing else changing it to use a sterling mag would improve it 1000%.sturmgeweher.com has not yet provided any insoght yet but it did give me the opportunity to post for sale a bergman mag and loader, so not a total loss
|
October 17, 2013, 02:09 PM | #10 |
Senior Member
Join Date: September 22, 2012
Location: Marriottsville, Maryland
Posts: 1,739
|
I heard a warning on the Internet {google: Sterling's}.... about the danger and possibility of a premature detonation, if somebody uses a Sterling magazine in a Sten gun.
__________________
That rifle hanging on the wall of the working class flat or labourer's cottage is the symbol of democracy. It is our job to see that it stays there." --- George Orwell |
October 18, 2013, 04:57 PM | #11 |
Senior Member
Join Date: May 15, 2011
Posts: 1,405
|
I was in the Army and we were out working with the Canadians and they took us to the range and let us fire their FALs and L2A3s. I missed out on the FAL but the Sterling L2A3 was fun.
__________________
Colt M1911, AR-15 | S&W Model 19, Model 27| SIG P238 | Berreta 85B Cheetah | Ruger Blackhawk .357MAG, Bearcat "Shopkeeper" .22LR| Remington Marine Magnum SP 12GA., Model 700 SPS .223 |
|
|