The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old October 25, 2011, 11:28 PM   #1
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Nosler Varmeggedon

Anyone shot any of these yet?

http://www.nosler.com/Bullets/Varmageddon.aspx

Last edited by mrawesome22; October 25, 2011 at 11:41 PM.
mrawesome22 is offline  
Old October 26, 2011, 01:13 AM   #2
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
I haven't even seen them in stock anywhere, yet.


Though, I have a suspicion that they may be versions of the Midway Dogtown, finally labeled under the manufacturer's own name. (I have no data to back up that "hunch"; just experience with Nosler products, the Dogtown bullets, the packaging methods for both, and Nosler's habit of partnering with other vendors and manufacturers for bullet designs.)

If they are... Nosler's velocity claims probably won't hold up. (They claim there is no reasonable velocity limit for these bullets.) The Dogtowns had the same claim, when they first hit the market. Within a year, they had a 4,000 fps max velocity listed. (With a recommendation for 3,800 fps or less.) As a .220 Swift shooter, with a supply of 34 gr Dogtowns on hand... I was less than impressed with bullets vaporizing. (I was an "earlier adopter". )


If they hit the market at a reasonable price, I might give the 6mm 55 gr Spitzer a try in my 6mm wildcat. How fast can they go?
__________________
Don't even try it. It's even worse than the internet would lead you to believe.
FrankenMauser is offline  
Old October 26, 2011, 01:48 AM   #3
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
I had the same suspicion, but they do not look like the dogtowns on the outside anyway.
mrawesome22 is offline  
Old October 26, 2011, 07:39 AM   #4
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
The ads are creative but I'm not sure what is left to squeeze out of varmint bullet performance.

Many existing bullets easily exhibit 1/2 MOA accuracy and there are choices for "limiting pelt damage" all the way to "explosive expansion". What will these bullets do that the rest of Nosler's line, or somebody else's, doesn't?

After shooting the Nosler 35gr BT in 22-250 at 4,435 fps I have little need for anything else and the .204 bullets seem like... .204 bullets.
__________________
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
Old October 26, 2011, 07:29 PM   #5
cornbush
Senior Member
 
Join Date: September 29, 2008
Location: The retarded place below Idaho
Posts: 1,408
I think I'll stick with the Barnes Varmint Grenade in my .223, they got the right name for them..........it's like delivering a miniature grenade, even on ground squirrels.
__________________
The best shot I ever made was an accident
cornbush is offline  
Old October 26, 2011, 09:00 PM   #6
dunerjeff
Senior Member
 
Join Date: March 31, 2011
Location: central Wisconsin
Posts: 440
Sierra's varminteers and Hornady's A-max's tend to turn Praire Dogs into chunks also.
dunerjeff is offline  
Old October 27, 2011, 09:46 PM   #7
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
I wonder if these have a longer bearing surface than the BT?

I never could get BT's to shoot anywhere close to the accuracy of a V-Max and I always was suspicious that the short bearing surface is to blame.

Last edited by mrawesome22; October 27, 2011 at 10:04 PM.
mrawesome22 is offline  
Old October 27, 2011, 11:43 PM   #8
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
Quote:
I never could get BT's to shoot anywhere close to the accuracy of a V-Max and I always was suspicious that the short bearing surface is to blame.
There's only one way to find out...
__________________
Don't even try it. It's even worse than the internet would lead you to believe.
FrankenMauser is offline  
Old October 27, 2011, 11:57 PM   #9
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Quote:
There's only one way to find out...
Yep. Wait for the 50 grainers to come out and test them.

My 250 gives me dirty looks if I don't take her past 3,800 fps
mrawesome22 is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03905 seconds with 10 queries