The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools Search this Thread
Old April 7, 2012, 03:10 PM   #1
Senior Member
Join Date: December 13, 2010
Posts: 395
Holster Discoloration

I have a horsehide holster that I took a look at today when I took a picture of it for another thread. Looking at it, I'm wondering if this darker area is just wear from rubbing on clothes when being worn, or if it is mold growing on the holster? I'm a lefty, and this is the side of the holster that gets sweat on it if it is hot outside. This area has no smell and the black discoloration will not wipe off with a rag.

Any ideas? If it is normal discoloration from wear, then fine, but if it is mold, how would I take it off without damaging the holster?

Is this normal for IWB horsehide holsters?

balance is offline  
Old April 9, 2012, 03:04 PM   #2
Senior Member
Join Date: April 16, 2008
Location: Missouri
Posts: 1,891
Well, if that's not dirt then it certainly looks like mold.

I work with horsehide quite a bit when making holsters... That is NOT normal.

A few suggestions to clean that puppy up -

- vinegar
- Lysol
- lemon juice

Before you try any of those, please note that I have never had to remove mold from a holster... So I honestly have no idea what results you might get. I've just read that these solutions can get rid of mold.

If it is mold... It's worth a shot. That mold can spread to other leather items. Not much to lose. Let us know what you decide!
Hopp Custom Leather <------ click for HOLSTER awesomeness!!

-There is no theory of evolution... Just a list of creatures Chuck Norris has allowed to live.
Sixer is offline  
Old April 9, 2012, 04:44 PM   #3
Senior Member
Join Date: July 29, 2010
Location: The ATL (OTP)
Posts: 3,641
Not sure, but does anyone know if you can kill mold by freezing it? Would freezing the holster damage the leather? Again, just a thought...
A major source of objection to a free economy is precisely that it ... gives people what they want instead of what a particular group thinks they ought to want. Underlying most arguments against the free market is a lack of belief in freedom itself.
- Milton Friedman
BarryLee is offline  
Old April 10, 2012, 06:26 PM   #4
Senior Member
Join Date: December 13, 2010
Posts: 395
Thanks for the replies.

It is definitely not dirt, as this holster is either carried IWB, or left in a safe that has about 10 desiccant pacts with no indication of humidity. The only moisture this holster receives is on hot days when sweat may get to it when being carried.

The more I look at it, the more I'm thinking that this is mold. I'm not too sure I want this holster rubbing on me for the time being.

If I choose to clean it with either the vinegar, lysol, or lemon juice, what is the method behind cleaning the holster with these chemicals? Would any damage the leather if left on for too long? Should I soak the whole holster, or just dab a bit on the effected areas?

I'll also look into freezing it or leaving it in the sun for a while.

Here are some more pictures:

And some of the other, non-discolored side:

balance is offline  
Old April 10, 2012, 06:57 PM   #5
Junior member
Join Date: February 14, 2012
Posts: 268
Try bringing it to a shoemaker.Those guys have been around leather for years and might tell you what it is. If the leather is rubbing against your body and you're sweating, then it is going to at the very least discolor it. It may be nothing, but I wouldn't be too quick to apply anything to it, cause you could ruin it. That's a well made holster by Galco and maybe giving them a call would be wise.
gunsmokeTPF is offline  
Old April 11, 2012, 05:43 PM   #6
Senior Member
Join Date: May 1, 2001
Posts: 9,648
I used to use Galco Royal Guards a long time back. I used to use two of them a year, usually rotating one out for a new one each year. In the summer, they were both constantly wet through from sweat and never would dry out. There was usually discoloration, but I never remember seeing mold on them. Not saying it wasnt there though.

If this is an issue for you, Id highly suggest you check out a good kydex holster. It will eliminate 99.9% of any kind of moisture issues you have with leather, and the holsters are usually about half what a good leather costs.

This was the last Royal Guard I had. Its about a month old in the pic. The duct tape on the back was there to try and slow the sweat from getting through. It was a lost cause......

This is the Blade Tech that replaced it. Its got over 10 years of daily use on it. I still have it today, and its still just as useable as the day I bought it about 20 years ago.....

"If the rule you followed brought you to this,
of what use was the rule?"

“The enemy is anybody who's going to get you killed, no matter which side he is on.” - Joseph Heller
AK103K is offline  
Old April 11, 2012, 06:41 PM   #7
Join Date: November 18, 2009
Posts: 25
Mold is a living organism that develops spores and spreads. It thrives in dark damp places.

Bleach will kill it quickly but must be handled carefully. You do not want to soak leather. Dilute a small amount (tablespoon) in a cup of water. Take an old face cloth and barely moisten it with the bleach water. Wipe down the holster and place in sun. Repeat as needed.
crankyoldlady is offline  
Old April 14, 2012, 05:14 PM   #8
Senior Member
Join Date: November 14, 1999
Posts: 1,573
I've used vinegar on gym clothes and gym bags that were starting to get funky ... it yielded good results. With a holster, you definitely don't want to soak it ... wipe it down as suggested ... and letting it dry thoroughly between treatments will be a good idea.

saands is offline  
Old April 17, 2012, 10:26 PM   #9
High Noon
Junior Member
Join Date: October 2, 2011
Location: Florida
Posts: 13
We have had good results with this

If you try the vinegar cut it with water. Maybe try 50/50 to start. No results increase vinegar.

High Noon is offline  
Old April 17, 2012, 11:18 PM   #10
Senior Member
Join Date: February 1, 2010
Posts: 363
That looks like black mold in some spots.
Kill it before it gets any worse. The worst of all molds.
MarkDozier is offline  
Old April 18, 2012, 05:55 AM   #11
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270

I've used my Royal Guard since the late '90's without issue.
But I don't generate much sweat...
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old April 18, 2012, 09:19 AM   #12
Spats McGee
Join Date: July 28, 2010
Location: Arkansas
Posts: 7,434
Perhaps try some saddle soap?
I'm a lawyer, but I'm not your lawyer. If you need some honest-to-goodness legal advice, go buy some.
Spats McGee is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:46 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07886 seconds with 10 queries