looking for vektor cp1 owners

boat2 · April 2, 2023, 10:55 AM

are there any vektor cp1 owners here?

i'd like to take the trigger out of the frame but i can't see how this is supposed to be done.

the hammer/sear assembly in the rear has a visible pin through the frame, but in the front i see nothing, only a pin that holds the barrel.

Jack19 · April 6, 2023, 06:55 PM

I know I want one.

but can't help.

ballardw · April 7, 2023, 02:55 PM

If you don't have the manual with the exploded parts diagram look for that to help.

I know I'm not about to start taking mine apart.

Is there a particular reason you want to disassemble further than field strip? It seems unlikely given the parts situation that you have a modified trigger to install.

April 2, 2023, 10:55 AM	#1
boat2 Junior Member Join Date: April 1, 2023 Posts: 2	looking for vektor cp1 owners are there any vektor cp1 owners here? i'd like to take the trigger out of the frame but i can't see how this is supposed to be done. the hammer/sear assembly in the rear has a visible pin through the frame, but in the front i see nothing, only a pin that holds the barrel.

April 6, 2023, 06:55 PM	#2
Jack19 Senior Member Join Date: August 18, 2001 Location: Somewhere in the Ford Galaxy Posts: 706	I know I want one. but can't help. __________________ Liberty will not long survive the total extinction of morals. Samuel Adams

April 7, 2023, 02:55 PM	#3
ballardw Senior Member Join Date: September 19, 2008 Posts: 1,334	If you don't have the manual with the exploded parts diagram look for that to help. I know I'm not about to start taking mine apart. Is there a particular reason you want to disassemble further than field strip? It seems unlikely given the parts situation that you have a modified trigger to install. __________________ -+-+-+-+-+-+-+-+-+-+-+-+-+-+ All data is flawed, some just less so.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search