![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Still on the quest for a light .308 Win.
I'm still on the hunt for a sub 6 lbs .308 Win rifle and I've boiled it down to a few choices. My goal is 8.5 lbs or less with loaded magazine, sling, Nightforce SHV 3-10X42, and suppressed. I haven't been able to find any of these rifles anywhere within 135 miles to handle (save one) to know if I'd like it. These are the rifles that fit in my budget right now, allow me to meet my weight goals, and how I'm ranking them.
1. Howa Superlite, 4 lbs 7 oz lightest of all rifles almost a full pound lighter, and middle of the road on price at $1000, carbon fiber synthetic stock. Cons, proprietary short action smaller than the normal 1500 action. This rifle will weigh between 7.5 and 8 lbs without having to change anything except my current scope base. 2. Christensen Arms Mesa FFT, 5.5 lbs and $1300, with M700 footprint, carbon fiber synthetic stock. The only con I have is I'll have to change out my current rings and bases to keep it at 8.5 lbs. 3. Kimber Montana, 5.5 lbs and $1350-2000+, stainless steel rifle, lightweight sythetic stock. Cons, are none currently available. I can backorder at $1350, or pay $2000+ for a used or NOS rifle. New scope mounts required. 4. Kimber hunter, 5 lbs 6 oz for $900, stainless steel rifle. Cons, injection molded stock and new scope mounts required. 5. Savage Lightweight Storm, cheapest at $700, stainless steel. Cons, injection molded stock, and new scope base required. I have handled this rifle, I'm really just not fond of the Accufit stock. I'm really leaning towards the Howa SL and the Mesa FFT. However, I'm having a hard time wanting to spend $1000+ on a rifle I've never had in my hands.
__________________
NRA Life Member |
![]() |
![]() |
#2 |
Senior Member
Join Date: February 7, 2008
Location: pa.
Posts: 2,434
|
i have a kimber montana in 257 roberts with a 2x7 leupold scope in light weight rings-mount that comes in a 6.3 lbs. it keeps 3-4 shots on a nickle at 100 yards with a 115gr bullet at 2900 fps. a dream to carry and accurett enought for shots to 300 yrds. i paid 750.00 for it as no one seemed to want a 257 roberts.
|
![]() |
![]() |
#3 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 27,785
|
Quote:
Sounds like you need to start with something under 6lbs. Sorry I don't have any suggestions. Are you familiar with the saying in engineering that goes, "Light, Strong, Cheap....pick any two...." ![]()
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
![]() |
![]() |
#4 | ||
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Quote:
Quote:
__________________
NRA Life Member |
||
![]() |
![]() |
#5 |
Junior Member
Join Date: January 17, 2019
Posts: 8
|
My cousin bought a Christensen Arms Mesa in 6.5 Creedmoor. It is the lightest rifle that I have ever handled.
Note that it has a labor intensive barrel break-in procedure. It has you take 6 shots, then a 30 minute cleaning procedure using nylon brushes and bore guide. I've had bottles and bottles of Hoppe's cleaner from many cleaning kits, and after breaking this rifle in I only have an ounce or two left. It has you do this for the first 50 rounds. I got the cleaning procedure down to 20 min or so there towards the end! Whew!! It is a nice smooth rifle, and it was fun breaking it in. I'm excited to start reloading for it. As soon as I get current projects caught up. |
![]() |
![]() |
#6 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,241
|
Easy.
Kimber Hunter. Super light, you can get Talley mounts for it, IIRC about 3 oz. Get a good scope, insert your choice here, maybe 1.5 lbs. Nylon sling, maybe 4 oz. This leaves you about a pound for a suppressor. Bad part, very few aftermarket accessories, barrels are very skinny. Second choice, Christensen Arms Mesa. Nice rifle, relatively lightweight, but the core of the rifle is heavy, I don't see you getting it all together under 8 lbs. Good part, they tend to be very accurate. Good part, lots and lots of accessories available since it's a 700 clone. Bad part, they are a little spendy. Either way you go, not bad choices. If light weight and 700 clone is important to you, there are titanium 700 actions on the market, but tend to be a little pricey, about 2 grand last time I looked.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
![]() |
![]() |
#7 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 27,785
|
Got to thinking on it, and I actually do have a suggestion, but you won't like it, and it probably won't fit your requirements.
My light weight .308 Win is a Rem Model 600. ![]() 18.5" barrel, wood stock, blind box magazine (4+1 capacity) Weaver mount & rings, JC Higgins (Weaver) 2.5x post scope, leather sling goes just over 7lbs all up. No suppressor, almost no aftermarket parts, no factory support, been out of production a bit longer than the 50 years I've had mine, and Remington has gone away... ![]() Good deer rifle, mine puts everything into 2 inches @ 100yds and that's good enough for me. Plus, I just like it, despite the fact that it kicks a bit. ![]() Unless you happen to find one on the used rack in a local shop (and they aren't common) you won't be able to handle one. They do show up on the Internet for sale, from time to time, still. Can't recommend any new, or current production guns, sorry. I've got mine and simply have never looked for anything else.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
![]() |
![]() |
#8 | ||
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Quote:
I've talked with my buddy who has a Kimber 84m in 7-08 and a Hunter in 6.5 Creedmoor, and has owned a Montana in .280 AI. He's advised against the Hunter, and said wait for a Montana. He said it was a mistake to trade off his Montana after surgery for the Hunter. Quote:
__________________
NRA Life Member |
||
![]() |
![]() |
#9 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,714
|
The model 7 is just a modern 600. You should be able to find one at a better price.
With a scope that heavy and a suppressor you're going to have a hard time making weight. You may not be able to check off all the boxes but come close. I'd start with a Tikka. With the barrel chopped to 18" you'd be at or under 6 lbs. Then go from there and let weight fall where it does.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
![]() |
![]() |
#10 |
Member
Join Date: March 21, 2006
Posts: 85
|
I've shot both the Kimber Hunter and Savage LWS,both in 6.5. They both shoot and handle well. The Kimber has a 22" barrel vs. 20" for the Savage so you might get a little more oomph from the Kimber but not enough to make any real difference in the field. Without weighing each on a scale, I could't say which weighs more. They both feel light.
I have handled, but not shot, the Howa Superlite. It is definitely light but the balance seems to be noticeably muzzle heavy (if that is possible in a 4.5lb rifle). I would think putting a heavy scope and suppressor on that would make it even more muzzle heavy. |
![]() |
![]() |
#11 | ||
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Quote:
Quote:
__________________
NRA Life Member |
||
![]() |
![]() |
#12 |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 3,788
|
Your gonna have a hard time doing that with that optic snd a suppressor. Gonna be spendy, probably gonna need something with a carbon fiber stock and barrel. And you might have to change optics.
__________________
I don't believe in "range fodder" that is why I reload. |
![]() |
![]() |
#13 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
@Shadow9mmn
All rifles mentioned will keep me 8.5 lbs or less.
__________________
NRA Life Member |
![]() |
![]() |
#14 |
Senior Member
Join Date: March 2, 2014
Posts: 11,230
|
Is it really worth an extra 1, 2 or 3K$ or more to shave a pound or two off a rifle's weight? In my book, no. I've shot a few carbon wonders, don't care for the way they feel or recoil.
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! |
![]() |
![]() |
#15 |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 3,788
|
Should keep you under 8.5lb. Does not mean they will. Is that including rings? is that including a sling? are you mounting direct thread or QD? did you account for the gun being loaded?
__________________
I don't believe in "range fodder" that is why I reload. |
![]() |
![]() |
#16 | |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 3,788
|
Quote:
I have only held a carbon wonder once, felt/handles strange to me. Never got to shoot one.
__________________
I don't believe in "range fodder" that is why I reload. |
|
![]() |
![]() |
#17 | |
Senior Member
Join Date: March 2, 2014
Posts: 11,230
|
Quote:
![]() Actually, you're right--I wouldn't want to shoot one for an extended period of time, and they can be very accurate--probably have a good market with guys going on long trek hunts (though I wonder what happens if they have to haul meat out??)
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! Last edited by stagpanther; March 27, 2023 at 12:29 PM. |
|
![]() |
![]() |
#18 | ||
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Quote:
Quote:
I think 7.5lbs to 8.5 lbs is a sweet spot to carry and shoot for a hunting rifle. That's where I'm trying to end up.
__________________
NRA Life Member |
||
![]() |
![]() |
#19 | |
Senior Member
Join Date: March 2, 2014
Posts: 11,230
|
Quote:
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! Last edited by stagpanther; March 27, 2023 at 03:51 PM. |
|
![]() |
![]() |
#20 | |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Quote:
Howa Superlite 4 lbs 7 oz ![]() Christensen Arms Mesa FFT 5.5 lbs ![]() Kimber Montana 5 lbs 2 oz ![]() Kimber Hunter 5 lbs 7 oz ![]() Savage Lightweight Storm 5.6 lbs ![]()
__________________
NRA Life Member |
|
![]() |
![]() |
#21 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,049
|
ruger?
I can't advise on the naked weight of my suggestion, but what about the Ruger Predator/308 with the 18" bbl? I sure am happy with mine.
|
![]() |
![]() |
#22 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
@bamaranger, 6.2 lbs naked per Ruger. I had researched the compact, thinking it might be an option.
__________________
NRA Life Member |
![]() |
![]() |
#23 |
Senior Member
Join Date: March 2, 2014
Posts: 11,230
|
Hmmmm...if I was asked to build something like this I'd look at an MDT LRS chassis made to the SA receiver of your choice and then order a custom lightweight sporter barrel, though you might be limited by how thin they can go based on needing the muzzle threaded for your suppressor. Polymer AICS mag, and assuming this is a pack-in hiking rifle I'd put a minimalist AR folding stock on which reduces the size enough to pack and carry.
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! |
![]() |
![]() |
#24 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 27,785
|
For some reason this thread puts me in mind of a scene in the 13th Warrior.
The "arab" is given a large sword, and says "I cannot lift this!" The Viking replies with a laugh, and says "Grow stronger!!!" ![]()
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
![]() |
![]() |
#25 | ||
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,084
|
Quote:
Quote:
Also what are you willing to compromise on with your firearms. I like my suppressor and my NF optic, why should I not use them? I already have a 9+ lbs bunting rifle using both, it didn't stop me from getting my elk. All I can tell you is never once have I ever wished to carry heavier equipment on a hunt or as an infatry soldier.
__________________
NRA Life Member |
||
![]() |
![]() |
Thread Tools | Search this Thread |
|
|