The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

View Poll Results: Which option?
Buy a progressive press 13 48.15%
Buy an aftermarket barrel, holster, and reloading components 6 22.22%
Save for a new gun 4 14.81%
Other 4 14.81%
Voters: 27. You may not vote on this poll

Reply
 
Thread Tools Search this Thread
Old May 6, 2014, 08:58 PM   #1
Wwrhodes91
Member
 
Join Date: January 8, 2014
Posts: 46
$600, what to buy

Alright, so I'm getting into IDPA now. I have a Glock 34 configured how I like with Dawson sights. I'm going to have about $600 to spend on gear and I'm wondering what I should invest in first. I only have the cheap glock brand holster and mag pouches. I reload, but it is on a single stage press at the moment. I was also thinking about getting an aftermarket barrel for practice since I use lead reloads.
Wwrhodes91 is offline  
Old May 6, 2014, 11:26 PM   #2
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 3,794
Well, from the outside looking in- you don't sound like you're ready to give up the ghost on your glock. So, you might as well make the game more interesting by obtaining gear such as the bbl, holster/rig, and reloading components. Just my 2.75 cents worth.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I'm going to use the words "clip" and "Long Colt" every chance I get. It grinds my gears to see new members attacked when we all know dang good and well what's being refered to.
10-96 is offline  
Old May 7, 2014, 12:23 AM   #3
Wwrhodes91
Member
 
Join Date: January 8, 2014
Posts: 46
Wouldn't mind getting a CZ or clone for ESP, but I think I agree with the bbl, holster, and ammo stance
Wwrhodes91 is offline  
Old May 7, 2014, 09:48 AM   #4
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 15,353
Unless you cast your own bullets, I think you would do as well to load plated or coated bullets for the stock barrel.
Bayou Bullets was the first to use the Australian Hi Tek coating in the US, now followed by Black Bullets Intl and SNS.
I am fixing to start with BBI Hi Tek coated, I think it will do better than their old moly coat.
Berry's and Xtreme plated are ok, too.

A good holster - I use Ready Tac, available from CWPSA, but there are others - and a Dillon Square Deal B will put you in business within your budget.

http://cpwsa.com/collections/holster...a-idpa-holster
Jim Watson is online now  
Old May 7, 2014, 12:19 PM   #5
Wwrhodes91
Member
 
Join Date: January 8, 2014
Posts: 46
Thanks for the excellent advice. SNS, BBI, and Bayou are almost the same price as the lead bullets I buy so that takes care of that. I think I might go with the CPWSA as well. Thanks! Saving money on the barrel will be nice.

Last edited by Wwrhodes91; May 7, 2014 at 12:43 PM.
Wwrhodes91 is offline  
Old May 8, 2014, 04:12 PM   #6
Bultaco
Senior Member
 
Join Date: September 25, 2013
Location: Western Co.
Posts: 156
Take a chunk of that & look for a Dillon press. If you look around you can pay quite a bit less than retail on a good used one. A better holster & mag pouches will only set you back about $150. Spend the rest on improving your shooting. A good IDPA technique video would help too. I used my Glock 34 for both SSP & ESP. I own & love my CZ single action but there is no disadvantage in using the Glock.
Bultaco is offline  
Old May 11, 2014, 09:11 AM   #7
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 20,268
Progressive press. Big stuff first and it will save you a fortune.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old May 20, 2014, 11:33 AM   #8
igolfat8
Member
 
Join Date: October 13, 2012
Posts: 93
Dillon 550 and Xtreme boolits. Casting lead is much cheaper in the long run but you have an investment in casting equipment on the front end and need a source for free or low coast lead plus you'll need a KKM bbl too.
igolfat8 is offline  
Old May 20, 2014, 12:38 PM   #9
jeager106
Junior member
 
Join Date: November 24, 2006
Location: N.E. Oh.
Posts: 527
Casting lead cost more in time spent than buying the excellent eXtreme
copper plated bullets.
jeager106 is offline  
Old June 3, 2014, 07:46 PM   #10
FM12
Senior Member
 
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,653
Dillon Square Deal. Thank me later.
FM12 is offline  
Old June 4, 2014, 08:14 AM   #11
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 10,447
Another vote for plated bullets with the stock barrel and a progressive press.
I use the Dillon Square deal for handgun reloading, but a friend says the inexpensive Lee Turret is plenty good, too, at a fraction of the cost.
__________________
Walt Kelly, alias Pogo, sez:
“Don't take life so serious, son, it ain't nohow permanent.”
g.willikers is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07214 seconds with 9 queries