August 27, 2015, 12:15 PM | #1 |
Member
Join Date: April 10, 2015
Posts: 29
|
reloading question
I would like to try loading some .44 magnums. I have some 2400 powder and Speer 240 gr lswc bullets. I can't seem to find the data that I need in any of my books. Could anyone help me with the starting and max. loads I need? Thanks
|
August 27, 2015, 12:28 PM | #2 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Use any data for a cast 240. Who made the bullet doesn't matter.
Data for a cast 250 will do too. These are max loads. Reduce by 10%. http://www.reloadammo.com/44loads.htm
__________________
Spelling and grammar count! |
August 27, 2015, 06:32 PM | #3 |
Senior Member
Join Date: August 23, 2014
Location: Nevada/Ariz/CA
Posts: 1,753
|
Well from the Lyman 49th edition manual, a 240 gr jacketed HP is shown with 18.4 to 20.5 gr 2400. But a 240 gr jacketed HC (?) Is shown with 17.5 to 19.5 gr 2400. Couldn't come up quickly with the definition of HC--maybe hollow cavity or hollow cone. A 240 gr lead bullet is shown with 18.5 to 20.6 gr 2400.
__________________
Ouch, the dreaded "M-1 thumb", you just know it will happen eventually, so why not do it now and get it over with?? |
August 27, 2015, 07:01 PM | #4 |
Senior Member
Join Date: September 15, 2007
Posts: 1,707
|
Good data, that. Thanks Condor Bravo. There are other good, even great, powders, but I too really like 2400, as it seems to do very well in moderate, as opposed to barn burner, loads. Which moderate loads I really like. Also it is a very cast bullet friendly powder, for some reason.
|
August 28, 2015, 04:11 PM | #5 |
Senior Member
Join Date: July 26, 2011
Location: USA
Posts: 1,730
|
Look at the older Alliant data here > http://castpics.net/dpl/
|
August 29, 2015, 08:49 AM | #6 |
Member
Join Date: April 10, 2015
Posts: 29
|
Thanks for the info guys
|
August 29, 2015, 11:26 AM | #7 |
Senior Member
Join Date: February 7, 2009
Location: Southern Oregon!
Posts: 2,891
|
Are the Speer bullets cast or swaged? Makes a big difference. Swaged bullets are really soft and need much lighter loads. Swaged bullets can have a tendency to lead at "normal" cast bullet velocities/pressures (skidding)...
That being the case, check with Speer to find some load data for their .44 bullet...
__________________
My Anchor is holding fast! I've learned how to stand on my own two knees... |
August 29, 2015, 03:03 PM | #8 |
Senior Member
Join Date: August 27, 2015
Posts: 153
|
I've always used 240 gr Keith hard cast with 21.5 gr 2400 and CCI mag primers.
|
|
|