The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old July 31, 2019, 02:39 PM   #1
SIGSHR
Senior Member
 
Join Date: September 13, 2005
Posts: 4,297
Reproduction parts in original guns.

On another boards someone asked about using reproduction parts in an original Remington M1858. Seems to me they would require some fitting/polishing since I presume they are metric.
SIGSHR is offline  
Old July 31, 2019, 07:18 PM   #2
44 Dave
Senior Member
 
Join Date: February 24, 2013
Posts: 480
Have used Uberti parts in original Colt 1860 and 1st Dragoon.
44 Dave is offline  
Old August 1, 2019, 10:13 AM   #3
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 20,487
Depends on your goal. If you want something to use (a shooter), then go for it. Yes, it will require fitting of parts but that's what you need for a shooter.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old August 1, 2019, 12:24 PM   #4
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 11,315
Small parts require fitting because they're not drop in parts. Metric or not makes no difference.
"...using reproduction parts in an original..." Really only matters if and when you sell the thing. As long as you say it's got new parts, nobody cares. It will lessen your market though. Pure collectors don't want 'em.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old August 1, 2019, 07:53 PM   #5
44 Dave
Senior Member
 
Join Date: February 24, 2013
Posts: 480
On the antiques I have put replacement parts in I save the original parts in case some one wants to buy a "broken antique".
44 Dave is offline  
Old August 4, 2019, 09:16 PM   #6
Driftwood Johnson
Senior Member
 
Join Date: January 3, 2014
Location: Land of the Pilgrims
Posts: 1,827
Howdy

Funny you should ask. On Friday I was going through my parts box to find a hammer spring that I could pop into an original Remington Model 1875 revolver. I bought this revolver a few months ago, and one of my projects was to get it ready to shoot in a CAS match. This involved taking it completely apart, cleaning it, removing all the old oil and grease, and lubing everything with Ballistol.

There was nothing wrong with the original spring except it is very stiff, and I wanted something a little bit lighter. I also wanted a different spring that would be a bit easier to install or remove than the original spring. Because of the way the 1875 spring fits into the frame, it was a bear putting it in or taking it out. I did not want to grind down the original spring, I wanted to find a replacement, so if I ever need to I can put the original spring back in. Or at least supply it.

Anyhoo, I had a bunch of springs that I assume were for the 1858 C&B Remingtons, and one of them fit the bill better than any of the others. I have no idea exactly where I got it, I am calling it a mystery spring. But it fit right in, and lightened the hammer pull a bit, just like I wanted.






I took it to the range yesterday to try it out for the first time. Don't criticize me too much for how big the groups are (note I was shooting at only 15 feet). This model was notorious for overly large chamber mouths. I was happy it was not keyholing and I got all the hits on the target. I took it to a match today and had a ball with it.





P.S. Regarding using modern parts in antiques, the question of metric vs inch parts is not relevant unless taking about screws and screw threads. Everything else you just have to try and make the parts fit the best you can.
Driftwood Johnson is offline  
Old August 4, 2019, 10:41 PM   #7
Aguila Blanca
Staff
 
Join Date: September 25, 2008
Location: CONUS
Posts: 12,721
Quote:
Originally Posted by 44 Dave
Have used Uberti parts in original Colt 1860 and 1st Dragoon.
I used a Uberti hand to repair a Colt 1860 for a friend. Worked just fine.
Aguila Blanca is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05228 seconds with 10 queries