May 5, 2017, 05:59 PM | #1 |
Senior Member
Join Date: October 29, 2013
Posts: 161
|
used smith 64-5 3 inch
I am looking at a Smith 64-5 3 inch barrel for sale, $530. I thought that the price was high, but I haven't looked at any used guns for a few years. Has some holster wear, but otherwise tight. Too high?
|
May 5, 2017, 09:16 PM | #2 |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
Will this be a 4 inch or 3 inch barrel 64?
Deaf
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
May 6, 2017, 08:23 AM | #3 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
The 3" K-frame .38s aren't so numerous and typically command a bit of a premium. I wouldn't say that price is unreasonable if the gun is in top shape but it could be better.
|
May 6, 2017, 09:10 AM | #4 |
Senior Member
Join Date: October 29, 2013
Posts: 161
|
3 inch barrel. Not real common. I don't believe a lot of rounds have gone though it based on what I have seen. He wanted 570, now 530. Barrel is not pinned. I would not rate the gun as primo , has some significant holster wear.
|
May 6, 2017, 05:31 PM | #5 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
How are you measuring the barrel?
I don't see how a stainless revolver can have significant holster wear. Holster wear is a term primarily used to describe wear of bluing on high spots of non-stainless guns? |
May 7, 2017, 04:57 PM | #6 |
Senior Member
Join Date: October 29, 2013
Posts: 161
|
From the tip to the end of the forcing cone. When I say holster wear, I should have been more specific: The gun appears to have been carried and used as evidence by some scratches and rubs etc, not "holster wear" which would be used to describe a blued handgun.
|
May 7, 2017, 05:36 PM | #7 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
I see.
Any 3" K frame is a nice gun. |
May 7, 2017, 07:09 PM | #8 |
Senior Member
Join Date: September 19, 2000
Posts: 1,082
|
People love those odd barrel-length Smiths. I'd be all over it.
|
May 8, 2017, 07:18 AM | #9 |
Senior Member
Join Date: November 3, 2009
Location: Not close enough to the beach
Posts: 1,477
|
3" round butt K frames are hot right now, and for good reason. But, $530.00 for one in the condition described by the O/P is somewhat overpriced. This price is getting into the starting price of 3" model 65's and 2 1/2" model 19/66's.
O/P, if you decide to buy it, remember you did not overpay, you just bought ahead of the curve. |
May 8, 2017, 08:30 AM | #10 |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
Last 3 inch K I got was a TPD (Tampa or Topeka police department) model 64-3 in .38 spl. Factory flash chromed DAO hammer and trigger.
I don't think I paid $300 for it. Tight and shoots right on with 158 gr SWCs. And just a bit earlier a S&W 65-5 or so. Case hardened hammer and trigger. No lock but it had the new style firing pin on the frame. .357. I think it was only $399 and it to was in excellent cond. I'm just a fool for K frames, mostly 2 - 3 inchers. Deaf
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
May 8, 2017, 02:12 PM | #11 |
Senior Member
Join Date: July 26, 2005
Location: The Bluegrass
Posts: 9,142
|
I like three inch revolvers, especially K-frames, though I only have a couple. If just some handling marks and minor scratches, I would probably pay that much. That's at my upper limit. Of course, prices vary by location.
You can probably either polish the gun or bead blast it to get out most of the handling marks. |
May 8, 2017, 07:09 PM | #12 |
Senior Member
Join Date: August 20, 2014
Location: northern Mn.
Posts: 271
|
That should make a dandy carry gun, especially on the trails or fishing.
|
May 9, 2017, 08:39 PM | #13 |
Member
Join Date: October 25, 2004
Posts: 37
|
I think it could be a pretty fair deal. These don't show up alot in my area, but the last Model 64 I saw was a 4" and it was in decent shape and listed for $525.
|
May 9, 2017, 09:26 PM | #14 |
Senior Member
Join Date: January 22, 2011
Posts: 256
|
Op, don't know how important a model 64 in 3 inch is to you but if you look online, you can find model 64 "police trade-ins" in 4 inch for around $300-$350 & model 10s for around $250-$350. Even after you factor in tax + shipping + transfer fee, it should still be less then the $530 he's asking.
|
May 10, 2017, 02:49 PM | #15 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
A 3" K-frame .38 or ideally .357 is the "Glock 19" of the wheelgun world, especially with a round butt and compact grips of some kind (S&W magna stocks and a Tyler-T grip adapter being superb for the job, make it a DAO with bobbed hammer for a home run).
Concealable but with an extra round, better ballistics, easier to reload, and in my experience a lot easier to shoot than any J-frame. OP the price isn't exactly stellar but I would try and talk him down to $500 or below. If not, I'd still snag it as long as it has a good tight action and put it to work as a carry gun. |
May 10, 2017, 02:52 PM | #16 | |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
Quote:
One has to shoot them to see the difference. Deaf
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
|
May 10, 2017, 03:36 PM | #17 | |
Senior Member
Join Date: December 6, 2014
Posts: 6,446
|
Quote:
As 60 2-1/2 19s, I paid $349 for one at Gander about 6 months ago.........they also had a K38 Masterpiece for $600, but I couldn't do both.....
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa |
|
May 10, 2017, 08:35 PM | #18 |
Senior Member
Join Date: July 8, 2016
Location: Summerville, sc
Posts: 163
|
I have a dao 2" model 64 priced at $499 at my work so that price is close to what we get around here.
|
May 13, 2017, 07:31 AM | #19 |
Senior Member
Join Date: September 9, 2009
Location: South Florida
Posts: 1,560
|
3 inch smith?
ok... A 3" round butt 64?... first find out if the gun is DAO. There are a few former police gun's in this configuration. This was the last incarnation of the NYPD authorized service revolver.
If your buying it as an investment... that might be a bit too pricey for that application and in that condition. If your looking for about the 2nd best .38 spl fighting gun available... jump on it. |
May 13, 2017, 10:50 AM | #20 |
Senior Member
Join Date: April 16, 2000
Location: Mesa, Arizona
Posts: 1,456
|
I've ben casually looking for an affordable 3", RB K-frame (Mag or Spl) for a couple years. Can't remember seeing one listed for or selling for under $500, which is why I don't own one. Can't understand where all these low priced guns I read about on the internet are found. Guess I don't live right, or in the right place at least!
And to the poster earlier who suggested picking up a 4" SB police trade in...if the object is to acquire a 3", RB those cheap police trade in's just won't cut it. Dave
__________________
RSVN '69-'71 PCSD Ret |
May 13, 2017, 12:38 PM | #21 |
Senior Member
Join Date: April 12, 2010
Location: Lake Martin, AL
Posts: 3,311
|
The newest edition of "The standard Catalog of Smith & Wesson" states $600.00 for As New In Box, $400.00 Excellent condition and $300.00 for Very Good condition. It also states law enforcement marked specimens bring a premium.
|
May 13, 2017, 01:49 PM | #22 |
Senior Member
Join Date: May 31, 2013
Location: East Texas
Posts: 1,705
|
I've had it in the back of my mind to acquire a 3" RB...either a model 10,13,64 or one of the fixed sight Smiths. If you can find one for under 500.00 at any gun show it would be a wonder. I've seen model 10's priced over the 800.00 mark that weren't ANIB. Just not a lot of them around out there.
|
|
|