|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 27, 2011, 10:18 AM | #1 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Picture of '58 Remmy hammer needed.
Actually the right hand side to be exact.
Why? well my '58 Remmy suddenly stopped locking the cylinder. I checked the spring, stripped & cleaned everything & noticed there is a "nub" of metal in the cue out flat on the lower right side of the hammer. It looks like it used to be a part that somehow wore down & I'm trying to figure out if this is my problem. The bolt is stiff to move, but will function to pop up & lock the cylinder with a little "extra" help from a finger.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
November 27, 2011, 01:38 PM | #2 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Well, all right. I just happen to have a brand new one. It's for a Pietta. I
guess I will put my coffee cup down and go take a picture. If you need it I will sell it to you. It's 12:40 now. Be back in about 1/2 hour. |
November 27, 2011, 02:15 PM | #3 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Is this what you wanted?
|
November 27, 2011, 03:25 PM | #4 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Perfect! Thank you.
Now for the $2.00 question Can anyone tell me what the round protrusion with the little dab of grease (I hope) actually does? Does it relate to operating the bolt & locking the cylinder?
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
November 27, 2011, 03:31 PM | #5 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
That is the cam
Is it the part of the hammer that engages and cycles the bolt.
BTW. It is not uncommon for a bolt to stick in the extended position if you operate the revolver without the cylinder installed. Essentially the bolts extends too far and gets stuck in the extended position. To get the pistol to cycle with the cylinder out, you may need to push the bolt back down into its retracted position with your thumb. The bolt will initially resist your efforts but then it will pop nto the retracted position. This happens on about half the pistols I own. From the overall appearance of your hammer you are ready for a new one or at least some work on this one.
__________________
Seek truth. Relax. Take a breath. |
November 27, 2011, 03:35 PM | #6 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Uh, yes.
One leg of the bolt rides on the side of that cam. As the hammer is pulled back it pushes the leg up, causing the bolt to lower, until the cam rotates to the point where the side 'disappears', allowing the bolt to respond to the spring load and snap up into place in the cylinder stop notch. |
November 27, 2011, 03:36 PM | #7 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
I was afraid of that. Thanks.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
November 28, 2011, 04:25 PM | #8 | |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Quote:
I haven't posted pics of my parts yet & I thought that was a brand new hammer that was shown earlier? This is my hammer & bolt. & so is this, taken from a different angle.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
|
November 28, 2011, 05:03 PM | #9 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Yes, mine is new. I'm looking for a Hand for my Uberti Cattleman.
|
November 29, 2011, 09:18 AM | #10 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
|
|
November 29, 2011, 09:51 AM | #11 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Sorry to be so dense, but which hammer appears new mine or his?
Mine has seen use, but has developed a problem I'm trying to sort out so are you saying the sloping surface on mine is too rough?
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
November 29, 2011, 11:25 AM | #12 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Here is another picture of my new one.
|
November 29, 2011, 01:19 PM | #13 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Thanks!
I need to take a picture of mine from exactly that angle. As I learn how the 2 parts interact I'm beginning to get the feel that the bottom edge of my cam (on the left in your latest pic) has worn a depression & that may be what's causing the problem as the bolt's leg tries to ride up that surface to reset.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
November 29, 2011, 01:43 PM | #14 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Here's a Comparsion Between Yours & Mine
|
November 29, 2011, 02:34 PM | #15 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Judging from the wear on the bolt lug I'd say it's rubbing the side of the hole where it goes thru the frame and binding up, forcing the leg off the cam.
|
November 29, 2011, 05:19 PM | #16 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Well this may be the answer. I tore the action down again & smoothed & polished the scallop in the bottom edge of the cam, It took some work, but the leg now operates much more smoothly. I'm thinking the combination of the dragging bolt & the gnarly ramp on the cam probably overstressed a weak point & it went south.
Then the spring went *clik* & snapped off the leg going to the cam so I ordered a couple of replacements from VTI.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
November 30, 2011, 05:52 PM | #17 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Quick update.
I've been informed you can order just the cam Of course you have to install it & orient it correctly, but I figure I have nothing to lose at this point. The worst that could happen would be to need a new hammer, which is right where I am now! I'll keep you all posted.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
|
|