July 17, 2012, 08:43 PM | #1 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
3/4 oz target loads
As some here know, I have been playing with lowering my target loads to 3/4oz so as to save on shot and reduce recoil to a battered shoulder in need of surgery.
I bought the pink ClayBuster 12 gauge 3/4 oz wads,. and followed the recipe of 16.6 Red Dot, their wad, Gun Club hulls, Nobel Sport 209 primers (in lieu of Rem or Win), and 3/4oz of reclaimed shot The gun is a Beretta A400 Xplor Unico - the green receiver that shoots up to 3.5" goose loads. The loads were chrono'd and instead of the published rates of 1250, they were actually running 1038-1068 fps and 6300 psi - almost 200 fps short currently there are emails flying between me, Alliant and Claybuster as to why the major discrepancy The results? When I did MY part, these loads absolutely SMOKED targets with the recoil of a 10/22 The Beretta, set up for 3.5" goose loads, handled every shot without failure and threw the empties about 4' to the right - nothing interfered with me being a LH shooter I know Dave McC is/was using one of the A400 versions, but I can tell you this gun was flawless which really surprised me as I was expecting some issues with light loads and only having 6300 psi, but the gun gets a major THUMBS UP I am awaiting more details from Alliant, or otherwise I will increase powder to get 1250 and I expect even better results. I was averaging a 19-20 on the 5 stand with an IC choke, unfamiliar gun (it's the wife's), new reloads, etc.... I suspect with more practice, a LM, and set up for me, the scores will increase All in all, for those looking for a VERY light load for target or close upland birds like dove or quail -this will work |
July 17, 2012, 09:53 PM | #2 |
Junior member
Join Date: June 23, 2009
Location: Orange County, CA
Posts: 2,149
|
No Cheerio?
|
July 17, 2012, 09:55 PM | #3 |
Member
Join Date: July 6, 2012
Location: Omaha, NE
Posts: 73
|
Thanks for posting! I just got my reloading press the other day and am looking forward to getting into reloading this winter (purchased it now when a local store was running a discount). I'm looking to reduce costs and recoil, so I'll most certainly mark this post for reference.
|
July 18, 2012, 06:41 AM | #4 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
No need for a Cheerio with these wads, Klaw - they had so little recoil, there was no adverse effect for getting on the second shot at all
|
July 18, 2012, 07:15 AM | #5 | |
Senior Member
Join Date: August 10, 2004
Location: Plain Ol', TX
Posts: 713
|
Quote:
I have found that velocities run lower in reloaded GC hulls than STS hulls, presumably because the STS hull crimp offers more initial resistance than the GC hull. Oh, and FWIW - CB shows a 17gr RedDot load for the new CB0175S in a STS/GC hull. It's rated at 1300fps (which, from your experience will likely be wildly optimistic) but at least you know that you can increase your charge to 17gr without fear of anything untoward happening...
__________________
-A conclusion is not a destination, it's simply a convenient place to stop thinking.- -Reading a thing doesn't automatically make it so; repeating it doesn't necessarily make it any truer.- -Every Texan should be a member of the Texas State Rifle Association. Last edited by rbernie; July 18, 2012 at 07:27 AM. |
|
July 18, 2012, 07:54 AM | #6 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
The new ClayBustrer wad is called CB0175-12 and is pink in color
They also have a 3/4 oz wad for 20 gauge that works great |
July 18, 2012, 11:10 AM | #7 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
I'll pass the info on to "some of the old guys" at my club....
|
July 18, 2012, 11:56 AM | #8 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
1-oz, in the past you've mentioned, one reason for you using reduced loads is the price of shot. If you haven't noticed (with haz-mat fees and all), the price of powder has gone up, too. For 3/4-oz loads, I shoot a 28-ga. It's more efficient than shooting 3/4-oz in a 12-ga and uses approximately 25% less powder.
|
July 18, 2012, 01:04 PM | #9 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
True, Zippy, and at one point I had several 28 gauge guns and a reloader.......and FOUR different hulls requiring three different wads and a different powder
Now, I use one powder, one reloader, one hull, and two different wads - all in one gauge of gun Not saying I might not meander back to 28's at some later date, but as I am shooting registered sporting clay events, a 12 IS the gun/gauge to win with, and as a shoulder gets its repair and heals, i can always load back upwards. I still shoot 1oz for registered shoots Zippy - buying powder through my club means no hazmat and the club sells at the smallest of profit margins to keep shooters coming back |
July 18, 2012, 01:38 PM | #10 |
Junior member
Join Date: September 15, 2001
Location: Central PA
Posts: 1,007
|
interesting subject material. I'm learning allot for an old fart!!
|
July 18, 2012, 01:44 PM | #11 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
Slugo, my friend, see all that you're missing by not reloading?
|
July 18, 2012, 02:48 PM | #12 |
Staff In Memoriam
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,811
|
The A400 here may choke on 3/4 oz loads. It took a while to make it reliable with 7/8 oz stuff, but now it eats them w/o a glitch.
I do load 3/4 oz in 12 gauge for new shooters. Oft these are for the little 12 gauge H&R single with the 12" LOP that I loan out to new, pixie sized shooters. Here's the recipe, I think. I'm at work and can't look at my notes. Remhull, Gun Club, STS or Nitro. Win 209 primer. 16 gr Clays. CB 1 oz wad, the clone to the WAA12SL. 3/4 oz of hard premium shot. Zero wad pressure. I don't have crimp problems with this and require no Cheerio or other filler for a good seal. Busts targets as well as any out to 35 yards. Even in that 5.5 lb single, recoil is minute. In 20 gauge, I load up 3/4 oz loads using Hodgdon's data for Universal Clays. They will not reset the triggers in my SKB O/U but work very well in an 870. |
July 18, 2012, 02:54 PM | #13 |
Senior Member
Join Date: October 24, 2007
Location: Eastern PA
Posts: 318
|
Are you getting un-burnt powder out of the ejection port or are you getting a good complete burn?
|
July 18, 2012, 06:34 PM | #14 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
I got a good complete burn,no residue like one finds when using Unique. In 20 for 3/4 oz using the new wads, I am using 15.5 of Universal Clays, which is my load for 7/8
Dave, I am surprised you can drop that load in a 1oz wad and not need some form of filler to get a good crimp. I could do it with a 7/8oz load, but not 3/4. When I used 7/8oz wads and dropped 3/4 I got decent crimps; with this new wad, the crimps come out looking like perfect factory loads |
July 18, 2012, 06:57 PM | #15 |
Junior member
Join Date: June 23, 2009
Location: Orange County, CA
Posts: 2,149
|
Me BAD. I have gone back to 1-1/8 ounces until I figure out how to hit that barn door (if I ever will) and when they hit in 16 yard trap they demolish the targets; even bios. They also beat the crap out of me when I changed my mount and bascially got the heel of my pad down in the pocket and off of my collar bone, but after two weeks of working with the new mount it is nada.
Still, my plan is when my existing supply of 1-1/8 ounce wads runs out to go to ones. Perhaps 7/8 down the road but I doubt I will be shooting 3/4 in the immediate future. |
July 18, 2012, 07:56 PM | #16 |
Senior Member
Join Date: December 6, 1999
Location: Richmond, Virginia USA
Posts: 6,004
|
"almost 200 fps short"
See, we are in a recession. Everything is slow. |
July 18, 2012, 08:07 PM | #17 |
Senior Member
Join Date: March 22, 2011
Posts: 256
|
I spent my first year of shotgun shooting with only the very tip of the bottom of the pad on my collar bone. That used to make other people cringe when I pulled the trigger, but it didn't bother me one bit.
I then started to put the gun down where it belongs and learned to shoot it from my shoulder. Took a few sessions to get used to it, but it works for me now. Just have to bend my neck more than I used to. I no longer use the mid bead after shooting my friends new Beretta which came with no mid bead. Was unusual at first but now it seems natural. We have a guy that shoots Trap with his .28 gauge, 3/4 ounce load, breaks them just fine. Doesn't smoke them, but still gets the same score! He also shoots Sporting Clays with a .410 gauge gun. It amazes me how well he does with that little gun, makes me feel bad when I can't beat him! |
July 19, 2012, 12:10 AM | #18 | |
Junior member
Join Date: June 23, 2009
Location: Orange County, CA
Posts: 2,149
|
Quote:
|
|
July 19, 2012, 05:51 AM | #19 |
Senior Member
Join Date: January 5, 2010
Posts: 514
|
If you get a chance try some Tightwad. Its a very good 3/4 and 7/8 oz 12 gauge powder. Also very economical.
|
July 19, 2012, 07:07 AM | #20 | |
Senior Member
Join Date: August 10, 2004
Location: Plain Ol', TX
Posts: 713
|
Quote:
__________________
-A conclusion is not a destination, it's simply a convenient place to stop thinking.- -Reading a thing doesn't automatically make it so; repeating it doesn't necessarily make it any truer.- -Every Texan should be a member of the Texas State Rifle Association. |
|
July 19, 2012, 02:57 PM | #21 |
Staff In Memoriam
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,811
|
1 oz, there's some dish to the crimp but not enough to leak shot. With AAs, I need a Cheerio. Zero wad pressure, IMO, makes the difference....
|
July 20, 2012, 11:30 AM | #22 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
I do not use any wad pressure for ay load using a plastic integral wad/shot cup - it isn't necessary. Wad pressure is a holdover from the old days of felt wads and since folks still load with them and shot overcards, etc., it can be useful.
Dave - you might want to call ClayBuster - they'll send you a sample of 25 to try for no charge of any of their wads. This pink one is giving me some great crimps and performance. I am wondering if the chrono'd low speed was due to the gun bleeding off too much of what pressure/gas there was in order to make it work......but I am also going to bump the load to 17.5 - which should get me where I need to go. I will also chrono my current loads in my O/U to see if the speed stays the same |
July 20, 2012, 02:31 PM | #23 |
Staff In Memoriam
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,811
|
Thanks, I'll give them a call forthwith. I need to load up some 3/4 oz stuff for a family member's intro to clays, so this is right on time.
|
Thread Tools | Search this Thread |
|
|