I want to put a suppressor on my taurus 92

gadgetguy1288 · March 18, 2009, 08:44 PM

But i have a few questions,

1) where do i go about getting a threaded barrel for it?

2) what cans would you recommend for it? does anyone on here have a canned pt92?

3) does anyone make a 9mm flash suppressor that would be able to thread on to the barrel when im not using the can?

Any other info is always appreciated.

Randy

David Hineline · March 19, 2009, 01:01 AM

Most just get the short bit of the factory barrel that protrudes threaded 1/2X28. Threaded barrels would be available for purchase from barrel manuf.

The beretta/taurus is one of the pistols that can operate with a non boostered silencer, but it will also work with a booster, so buying a booster silencer will give you more options in mounting it onto other pistols.

MGRacer · March 23, 2009, 09:08 PM

It is likely you will need higher sights: one option (I used them) is http://www.millettsights.com/controller.php

You can thread the stock barrel -- I did at first then went to a slightly longer barrel threaded from: http://www.jarvis-custom.com/

Picture:

I use either the updated SWR PC-K2 or an AAC Evolution 9 on the gun. It works with either booster or not.

Edit: You can bore a larger hole in the AR-15 (.223) flash suppressor since it has 1/2x28 threads .. just be careful you do not confuse a small hole one with your larger hole thread protector for the pistol.

anthonydr2 · April 10, 2009, 11:35 PM

Trident from SWR works well on Taurus 92 and 99. It is also full auto rated.

March 18, 2009, 08:44 PM	#1
gadgetguy1288 Member Join Date: January 30, 2008 Location: Elizabeth City, NC Posts: 89	I want to put a suppressor on my taurus 92 But i have a few questions, 1) where do i go about getting a threaded barrel for it? 2) what cans would you recommend for it? does anyone on here have a canned pt92? 3) does anyone make a 9mm flash suppressor that would be able to thread on to the barrel when im not using the can? Any other info is always appreciated. Randy __________________ Randy "The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government, or in the case of a zombie outbreak." Last edited by gadgetguy1288; March 18, 2009 at 11:25 PM.

March 23, 2009, 09:08 PM	#3
MGRacer Senior Member Join Date: April 13, 2005 Posts: 130	It is likely you will need higher sights: one option (I used them) is http://www.millettsights.com/controller.php You can thread the stock barrel -- I did at first then went to a slightly longer barrel threaded from: http://www.jarvis-custom.com/ Picture: I use either the updated SWR PC-K2 or an AAC Evolution 9 on the gun. It works with either booster or not. Edit: You can bore a larger hole in the AR-15 (.223) flash suppressor since it has 1/2x28 threads .. just be careful you do not confuse a small hole one with your larger hole thread protector for the pistol. __________________ "A man's gotta do what he thinks is best."

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

March 19, 2009, 01:01 AM	#2
David Hineline Senior Member Join Date: December 23, 1999 Location: South Sioux City, Nebraska Posts: 704	Most just get the short bit of the factory barrel that protrudes threaded 1/2X28. Threaded barrels would be available for purchase from barrel manuf. The beretta/taurus is one of the pistols that can operate with a non boostered silencer, but it will also work with a booster, so buying a booster silencer will give you more options in mounting it onto other pistols.

April 10, 2009, 11:35 PM	#4
anthonydr2 Junior Member Join Date: April 2, 2008 Posts: 6	Trident from SWR works well on Taurus 92 and 99. It is also full auto rated.