![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
Beretta 84 Spring question
Does anyone how strong the mainspring and recoil spring on the 84 is supposed to be? I recently bought a used 84 and the spring on it seem stronger than those on my RIA M1911-A1 FS Tactical.
Thanks in advance.
__________________
Al Lowe |
![]() |
![]() |
#2 |
Senior Member
Join Date: November 26, 2016
Posts: 1,341
|
14 lb according to Wolff.
https://www.gunsprings.com/BERETTA/8...ID1/mID2/dID35 It's sometimes harder to rack the slide on the 84 because these are blowback guns, not locked breech. See this: https://www.shootingtimes.com/editor...el-84fs/358015 |
![]() |
![]() |
#3 |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
Thanks for the quick reply. I know it's blowback. But it just feels stiffer than I expected. Hell, it's almost as bad as my RIA Rock Ultra 10mm, and that has some stiff springs.
I may have to try some Wolff springs to see if they're lighter or the same, or worse.
__________________
Al Lowe |
![]() |
![]() |
#4 |
Senior Member
Join Date: November 26, 2016
Posts: 1,341
|
I have an 84, and it's hard to rack the slide. I also have a blowback 25 Auto, and it's almost impossible to rack it by hand. That's one of the reasons you'll find tip-up barrels on some of the small blowback autos. It's easier to load them that way than by racking the slide.
So, your 84 sounds normal. |
![]() |
![]() |
#5 |
Senior Member
Join Date: November 26, 2016
Posts: 1,341
|
Does it cycle with factory ammo? If it does, then it's normal.
|
![]() |
![]() |
#6 |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
Thanks for that Shooting Times article too. If not for that, I'd have not just figured out how the decocker works.
![]()
__________________
Al Lowe |
![]() |
![]() |
#7 | |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
Quote:
__________________
Al Lowe |
|
![]() |
![]() |
#8 |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
It works fine with factory ammo. It's just the springs seem stiffer than I remember. I had an 84BB years ago. And I don't recall it being as difficult as this.
__________________
Al Lowe |
![]() |
![]() |
#9 |
Senior Member
Join Date: November 26, 2016
Posts: 1,341
|
|
![]() |
![]() |
#10 | |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
Quote:
![]()
__________________
Al Lowe |
|
![]() |
![]() |
#11 | |
Senior Member
Join Date: May 8, 2009
Location: Florida
Posts: 3,764
|
My 84F has the stiffest slide in my safe.
Quote:
|
|
![]() |
![]() |
#12 |
Member
Join Date: March 31, 2007
Location: Mason, MI
Posts: 20
|
That is a very good possibility.
__________________
Al Lowe |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|