![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Junior Member
Join Date: January 11, 2018
Posts: 3
|
Browning A5 safety detent spring.
Hi everyone , I'm new here so forgive me while I learn how to use this site. I have an older Browning a5 12 gauge that was my grandpa's , the trigger spring is broken (the safety part of it) it's a rear trigger gaurd safety that is not pin retained , I think they are called intermediate style . I haven't been able to find a replacement . has anyone tried to make one of the newer pin retained ones work ? Any suggestions would be greatly appreciated !
|
![]() |
![]() |
#2 |
Senior Member
Join Date: December 10, 2014
Location: Texas
Posts: 1,128
|
Have you tried Numrich??
Here is a link in case you need it. https://www.gunpartscorp.com/gun-man...-auto-5?page=8 |
![]() |
![]() |
#3 |
Junior Member
Join Date: January 11, 2018
Posts: 3
|
Yes I've tried Numrich , they have the other two styles but not the one I need . thanks for the link I'll try it & let you know .
|
![]() |
![]() |
#4 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 19,732
|
Try Jack First or Ebay.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
![]() |
![]() |
#5 |
Junior Member
Join Date: January 11, 2018
Posts: 3
|
I'm watching eBay , I'll try the back first , thank you very much !
|
![]() |
![]() |
#6 |
Member
Join Date: August 4, 2012
Posts: 22
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
|
|