The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old January 18, 2020, 01:35 PM   #1
dyl
Senior Member
 
Join Date: October 31, 2009
Location: Ohio
Posts: 1,059
AR: sluggish safety selector

What contributes to a sluggish safety selector on an AR?

I assembled an AR pistol. At first the "discount" lower parts kit I used had visibly shallow angles for the safety selector, leading to a mushy feel on activation/deactivation. I replaced the detents and safety switch with leftovers from a CMMG branded kit and while it is a bit crisper when the selector arrives at the actual destinations, it often loses momentum partway and stops in between safe and fire. I have oiled it. My other assembled AR's don't do this, with parts kits from Rock River Arms and PSA.

My guesses are: Weak spring --> weak detent. Rough channel for the detent. Hole in grip drilled too deep --> weak spring pressure. Angles on Safety or detent not steep enough --> weak detent.

Kind of like a pocket knife detent on a frame lock/liner lock.

Am I missing anything? I could try another spring (it looked fine though..), another safety, or fill in the hole in the grip a little bit with something. At first, I was going to ignore this but it's annoying now.
dyl is offline  
Old January 18, 2020, 03:04 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 13,886
If the safety selector is cast, it could be out of round or not straight. It could be dragging on the tail of the trigger assembly. Weak detent springs make the safety flop around like a loose wing nut.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 18, 2020, 05:30 PM   #3
dyl
Senior Member
 
Join Date: October 31, 2009
Location: Ohio
Posts: 1,059
Good thought, hadn’t thought of it. The discount selector definitely was cast, a nice line heading up the center. The other, I’ll have to take some calipers to check for roundness. Thanks!
dyl is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.03742 seconds with 10 queries