The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old December 30, 2010, 08:58 PM   #3726
fredrader
Junior Member
 
Join Date: December 30, 2010
Posts: 5
Hi all,I have been wondering what year my S&W was made. I think it is a M&P but I am not sure. It has a 4" Brl ans has .38 Spl Ctg on it. Ser # S9356xx. I can post a pic if you need one..Thanks

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
fredrader is offline  
Old December 31, 2010, 04:17 AM   #3727
Crazy88Fingers
Senior Member
 
Join Date: November 20, 2010
Location: WesTex
Posts: 958
Pre-model-number N Frame produced in 1952-1953.
Crazy88Fingers is offline  
Old December 31, 2010, 09:30 AM   #3728
fredrader
Junior Member
 
Join Date: December 30, 2010
Posts: 5
Thank You
fredrader is offline  
Old December 31, 2010, 03:28 PM   #3729
Donttreadonme
Junior Member
 
Join Date: July 16, 2009
Location: York County, PA
Posts: 5
S&W Model 10-5

I just found a model 10-5 yesterday. The ser# is D696XXX . Can anyone help me out to find the approximate age of it?

Also, it is my understanding that all -5 models should be okay for +P rated factory loads, is this correct?

I can't wait to pick it up. Didn't have enough cash on me, so I left it on layaway. Going to get it Saturday if they're open. I was sold once I pulled that unbelievably smooth double action trigger. SA was crisp and light too.

I'm pretty psyched about it.

Thanks in advance for any help,

DTOM
Donttreadonme is offline  
Old December 31, 2010, 06:44 PM   #3730
Elkins45
Senior Member
 
Join Date: February 24, 2010
Posts: 498
I could use a little help with a 22 revolver I just bought. The seller called it a model 17 but after doing a little digging I don't think that's accurate. It has two different numbers stamped on it. In the yoke area is 3H 70XXX on both the yoke and the frame, but on the cylinder face and on the butt is K 68XXX.

It's a 5 screw gun, with a pinned barrel and recessed chambers if that helps. The reading I have done makes me think it's a pre Model 17 K-22. When did they stop making 5 screw guns?
Elkins45 is offline  
Old December 31, 2010, 06:44 PM   #3731
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Hi all,I have been wondering what year my S&W was made. I think it is a M&P but I am not sure. It has a 4" Brl ans has .38 Spl Ctg on it. Ser # S9356xx. I can post a pic if you need one..Thanks
Quote:
Pre-model-number N Frame produced in 1952-1953.
Uh, no. What you have is a Pre war .38 Military and Police (k frame).
The serial number is 9356xx. That looks to be an 8 in front of it but appears to have been added later. The serial number dates it to ~1940/41.
Quote:
I just found a model 10-5 yesterday. The ser# is D696XXX . Can anyone help me out to find the approximate age of it?

Also, it is my understanding that all -5 models should be okay for +P rated factory loads, is this correct?
Serial numbers ran from D659902 in 1974 to D750000 in 1975.
Model number stamped steel k frames (post 1957) are ok to use with +P.

Jim

Last edited by laytonj1; December 31, 2010 at 06:58 PM.
laytonj1 is offline  
Old December 31, 2010, 06:48 PM   #3732
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
but on the cylinder face and on the butt is K 68XXX.
It is a K-22 Masterpiece made in 1948. They went on to become the model 17 when S&W began assigning model numbers ~1957.
The 5 screw ended ~1955 for K frames.

Jim
laytonj1 is offline  
Old December 31, 2010, 07:32 PM   #3733
S&W460
Member
 
Join Date: April 27, 2009
Location: Saginaw,Michigan
Posts: 44
I just inherited a S&W revolver from my Dad. One is a S&W 38SP. serial# 8038** can anyone tell me when this was made and value its about 95%

Thanks
S&W460 is offline  
Old December 31, 2010, 07:33 PM   #3734
Elkins45
Senior Member
 
Join Date: February 24, 2010
Posts: 498
Quote:
It is a K-22 Masterpiece made in 1948. They went on to become the model 17 when S&W began assigning model numbers ~1957.
The 5 screw ended ~1955 for K frames.

Jim
Jim:

Thanks so much for the quick reply...it is much appreciated.

1948 huh? Wow..that's great. I had no idea it was so old. It looks fantastic. I'm thinking I finally made a smart buy at a gun show.

Happy New Year to you!
Elkins45 is offline  
Old January 1, 2011, 05:23 AM   #3735
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
S&W460:
You have a .38 Military & Police model of 1905 4th Change manufactured between 1940 & 1942. In original condition it's probably worth around $350-$400.
In the same serial number range S&W manufactured the .38/200 British Servive Revolver in .38 S&W caliber. After World War II a lot of these surplus guns were bored out to .38 Special and sold in the USA. Because the bored out .38 S&W chambers are a loose fit to the .38 special case its not uncommon for brass to bulge or split. A converted gun is probably worth $150 or so.
Radagast is offline  
Old January 1, 2011, 12:08 PM   #3736
S&W460
Member
 
Join Date: April 27, 2009
Location: Saginaw,Michigan
Posts: 44
thanks for the help.

I also have a 357 i want to check i have to get the serial #
S&W460 is offline  
Old January 1, 2011, 04:59 PM   #3737
Donttreadonme
Junior Member
 
Join Date: July 16, 2009
Location: York County, PA
Posts: 5
Quote:
I just found a model 10-5 yesterday. The ser# is D696XXX . Can anyone help me out to find the approximate age of it? Also, it is my understanding that all -5 models should be okay for +P rated factory loads, is this correct? Serial numbers ran from D659902 in 1974 to D750000 in 1975. Model number stamped steel k frames (post 1957) are ok to use with +P. Jim
Thanks Jim! Picked it up today, pretty happy with it:

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Donttreadonme is offline  
Old January 2, 2011, 12:35 AM   #3738
msa1955
Junior Member
 
Join Date: January 2, 2011
Location: Sierra Foothills, Calif
Posts: 5
Model 36 Manufacture Date?

I'm almost embarrassed to admit it but a friend had a model 36 he did not want and offerred it to me for $100. Wanting to help him out I agreed, sight unseen. I guess I did ok. Any help on the mfr date would be appreciated. Its a 36 with no dash, serial #AVT3XXX.
Thanks!
msa1955 is offline  
Old January 2, 2011, 11:25 AM   #3739
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
Its a 36 with no dash, serial #AVT3XXX.
AVT prefix would be 1987.
FlyFish is offline  
Old January 2, 2011, 01:30 PM   #3740
CBJR
Junior Member
 
Join Date: January 2, 2011
Posts: 2
S&W Serial Number Help

Could someone please help me date the following two revolvers. One is mine the other is a friends.

Model 34-1 SN 102xxx

Model 19-3 SN 1K50xxx

I appreciate it and thank you for your time

CBJR
CBJR is offline  
Old January 2, 2011, 02:30 PM   #3741
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
Model 34-1 SN 102xxx
Serial numbers ran from 70000 in 1960 to 108087 in 1965.

Quote:
Model 19-3 SN 1K50xxx
1971
FlyFish is offline  
Old January 2, 2011, 02:44 PM   #3742
CBJR
Junior Member
 
Join Date: January 2, 2011
Posts: 2
Thank you FlyFish for the information.
CBJR is offline  
Old January 2, 2011, 03:37 PM   #3743
Wildalaska
Junior member
 
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
Anyone got a closer date for my .455 yet?

WildimwaitingAlaska ™©2002-2010
Wildalaska is offline  
Old January 2, 2011, 04:57 PM   #3744
S&W460
Member
 
Join Date: April 27, 2009
Location: Saginaw,Michigan
Posts: 44
Some info on my 357 would be great..

Its serial # is 7K79**

Thanks
S&W460 is offline  
Old January 2, 2011, 05:10 PM   #3745
adler3200
Junior Member
 
Join Date: February 20, 2010
Posts: 6
smith 19=5

serial is 6xxx can anyone tell me age thanks
adler3200 is offline  
Old January 2, 2011, 05:13 PM   #3746
adler3200
Junior Member
 
Join Date: February 20, 2010
Posts: 6
model 30

32 long 4 digit serial anyone know the age thanks
adler3200 is offline  
Old January 2, 2011, 05:51 PM   #3747
msa1955
Junior Member
 
Join Date: January 2, 2011
Location: Sierra Foothills, Calif
Posts: 5
Model 36

Thanks FlyFish for the info.
msa1955 is offline  
Old January 2, 2011, 07:39 PM   #3748
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Anyone got a closer date for my .455 yet?
Roy Jinks at S&W does, but it'll cost you $50 to find out.

Quote:
Its serial # is 7K79**
7K1 to 7K26043 was 1974.

Jim
laytonj1 is offline  
Old January 2, 2011, 07:44 PM   #3749
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
smith 19=5

serial is 6xxx can anyone tell me age thanks
That's not the serial number. Take it from the underside of the frames grip butt. If it has target grips you will have to remove the them to see it.
Should have 3 letters followed by 4 numbers or a "K" in it.

Quote:
model 30

32 long 4 digit serial anyone know the age thanks
See above. And should have 6 numbers.

Jim
laytonj1 is offline  
Old January 2, 2011, 09:07 PM   #3750
69vette
Junior Member
 
Join Date: January 2, 2011
Location: Alabama
Posts: 2
S&W 357

Hi
Can someone help me with identifying the model and age of a revolver i recently inherited?

It's a S&W 357 s/n 5D34xxx

Thanks
69vette is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.94267 seconds with 9 queries