The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old December 3, 2021, 11:37 AM   #1
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 8,510
Is there a proper term Quick-Draw single action-shooting

Since I was a kid, I have mostly been drawn to Single-Action shooting. My big game hunting has always involved Single Action handguns. I got my first SA handgun at age-16. Practiced quickdraw and "Fanning". That leads to my question;

Is there a term in quick-draw where the hammer is down, trigger is pulled and held and hammer released with the thumb? This is what I feel happened in the Baldwin incident.

"You know, "The Thing ??!!!

Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old December 3, 2021, 06:51 PM   #2
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,471
If there isn't a term for that already, it could be called the "sear broke" technique", or maybe Alec'ing.
__________________
Liberty and freedom often offends those who understand neither.
noelf2 is offline  
Old December 3, 2021, 08:26 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 14,954
Louis L'Amour used to call it something like "thumb slip" or "slip thumb".
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old December 3, 2021, 09:11 PM   #4
AzShooter
Senior Member
 
Join Date: June 20, 2006
Location: Surprise, Az.
Posts: 738
World Fast Draw Society puts on quick draw matches. Check your area LGS for a possible match.

It seems to be growing rapidly. Holsters are made by Ernie Hill Speed.com and he can probably direct you to a match. He holds the world record.
AzShooter is offline  
Old December 3, 2021, 09:17 PM   #5
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 17,591
Quote:
Is there a term in quick-draw where the hammer is down, trigger is pulled and held and hammer released with the thumb? This is what I feel happened in the Baldwin incident.
The term is slipshooting and it is well known in history. Museum guns with the trigger tied back or taken out, hammer spurs modified to reach easier with the thumb.

Best read the rules of any fast draw or quick draw organization, it might not be allowed. (Fast Draw and Quick Draw did not used to be the same thing. Blanks vs bullets. I think just wax bullets now.)

And that is just the Baldwin Legend TODAY. He will have new lies tomorrow or at latest by Monday.
Jim Watson is offline  
Old December 4, 2021, 03:32 AM   #6
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 25,000
Slip hammer, slip shooting, slip guns, are all terms used for this. Elmer Keith had a couple of guns converted for this, he called them slip guns. You can see them in his book SIXGUNS, I believe, I know I have seen pictures of them either in that book or in his articles in Guns & Ammo magazine. Been ages, I no longer remember which, could be both...

The trigger was tied or taped back and the guns had the hammers replaced with an altered design which put the hammer spur much lower, about the middle of the hammer, not at the top.

Guns modified that way were an old time "speed trick" that has long since fallen out of favor. Not particularly safe, either.

You can do it with an unmodified SA just by holding the trigger back when cocking holding the hammer with your thumb and then letting it "slip" when you want to fire. Like "fanning" unless the gun has been modified, continuous use of those techniques is bad for the mechanism and can result in damage.
or so I've heard....
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.16151 seconds with 10 queries