|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 28, 2017, 10:20 AM | #1 |
Member
Join Date: May 21, 2009
Location: Rochester, NY
Posts: 60
|
After Sonic cleaning bolt and trigger assembly
I have used a harbor freight sonic cleaner for brass for years and finally decided to take apart the 1187 and put the bolt, stock nut/washers, trigger assembly, etc in the cleaner with the Hornady cleaner. It did great but after it dries there is a very thin layer of rust (no pitting) on some surfaces. How would you guys lube these parts as they aren't noted as being lubed in the manual but I want a layer of protection if possible. Thanks!
~Matt |
January 28, 2017, 11:35 AM | #2 |
Senior Member
Join Date: July 15, 2006
Location: Fern Creek ,KY and Metro Louisville at large
Posts: 430
|
Spray bottle filled with oil
__________________
Republic Arms and Armaments 07 1-502-231-1118 Machine Shop and Finishing Services to the trade and public |
January 28, 2017, 01:12 PM | #3 |
Member
Join Date: May 21, 2009
Location: Rochester, NY
Posts: 60
|
Thanks for the reply. I was wondering opinions on any special oils or dry lube to use. I don't want to gum up the action at all especially during late duck season and clay shooting.
~Matt |
January 28, 2017, 03:33 PM | #4 |
Senior Member
Join Date: January 19, 2007
Posts: 2,663
|
We used Breakfree CLP in a 32-oz spray bottle.
|
January 28, 2017, 04:26 PM | #5 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
WD 40 will do a great job of getting lube into all the parts.
Soak it down and wipe it off with a cloth or paper towels. |
January 28, 2017, 05:12 PM | #6 |
Member
Join Date: May 21, 2009
Location: Rochester, NY
Posts: 60
|
Thanks for the replies!
~Matt |
January 29, 2017, 09:03 AM | #7 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
Amazing-when you remove all the oil from steel parts, they rust.
|
January 29, 2017, 09:39 AM | #8 |
Senior Member
Join Date: October 20, 2016
Posts: 223
|
Corrosion X for guns.
Lubes, cleans, and prevents rust WAY better than WD40. Metal is not smooth and water in the low spots is actually cover and sealed in by WD. Many much better products available than water displacement formula 40. http://www.corrosionx.com/corrosionx-for-guns.html Sent from my iPhone using Tapatalk |
January 29, 2017, 11:06 AM | #9 |
Member
Join Date: May 21, 2009
Location: Rochester, NY
Posts: 60
|
It is amazing both how well the sonic cleaner did but also how the rust formed in a couple spots that never had it. A light cleaner pulled the rust and I'm going to use the REM dry lube in the bolt and hoppes elite on the rest since I have them already.
I have seen a sonic solution used after the cleaner that once the item is removed and dry a thin layer of lube remains...I can't remember the make...Lyman? That may be a smart purchase. ~Matt |
January 29, 2017, 01:19 PM | #10 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
Strange- in 45+ years of using WD 40, I have never seen it "cover" water. I use ultrasonics every day in my shop, nor have I ever had a problem with rusting.
So, how much better is "better?" |
January 29, 2017, 03:12 PM | #11 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Sonic cleaners remove everything, dirt, lube, old grease, light oil, dirt, crud, etc. When a gun is cleaned that way, ALL protection is removed from the work and a ferrous metal will rust very quickly in the presence of any significant humidity.
The only way to prevent that is to either use a rust-preventive (oil) immediately or move to a dry climate, the former being a bit less expensive. Jim |
|
|