|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 6, 2017, 09:49 PM | #1 |
Junior member
Join Date: January 1, 2015
Posts: 312
|
Weird problem with new Beretta 92FS hammer
I bought a Beretta 92FS Inox a couple weeks ago and ordered a bunch of Inox / stainless steel parts to go along with, including the original Beretta skeletonized Inox hammer and a spring kit from Wilson.
I have fitted all parts without issues but the new Inox hammer causes a really weird problem. By pulling the trigger, the hammer jumps out of the fully cocked position about 1/8” forward, and then I can decock the hammer with the trigger (or pull all the way through). When I put the black hammer back in, this issue is gone. I compared both hammers side by side. The new stainless hammer had some minor imperfections that I removed with my dremel, but the problem didn't go away. Otherwise both hammers are identical in dimensions. I managed to upload a short video showing the issue (this is a MOV video file directly out of my iPhone, every Windows Media Player will play it): https://www.youtube.com/watch?v=KeJ3...ature=youtu.be What could possibly cause this problem? What am I missing here? I'm guessing the hammer gets stuck in position A: I'd hate having to send my new gun in with a turnaround time of 4+ weeks. Any help is greatly appreciated. Last edited by McCarthy; January 6, 2017 at 10:34 PM. |
January 7, 2017, 07:03 AM | #2 |
Senior Member
Join Date: May 27, 2006
Posts: 2,313
|
I would post this over at berettaforum, where some genuine Beretta smiths hang out.
__________________
The past is gone...the future may never happen. Be Here Now. |
Thread Tools | Search this Thread |
|
|