|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 27, 2008, 02:11 PM | #1 |
Junior Member
Join Date: July 12, 2004
Location: Castalian Springs, TN
Posts: 8
|
Need load data-Berrys 115 gr. 9mm
I bought about 400 of Berry's 9mm 115 grain bullets. These are a plated copper bullet. On their web site they say not to exceed 1200 fps. Does any body have any load data for this bullet? And the col to. It will be shot out of a Ruger P89. The only powder that I have for pistol is Power Pistol, Tite Group, and Unique. I have bought Rainer bullets before for my Ruger P90 in .45 ACP. I used the lead load data in the Hornady 6th Edition. Using both Unique (6.0 grains) and Tite Group(5.0 grains).Thanks, gearyr.
|
January 27, 2008, 02:13 PM | #2 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
theoretical
OAL 1.125--1.130"
6.4g Power Pistol
__________________
. "all my ammo is mostly retired factory ammo" |
Thread Tools | Search this Thread |
|
|