|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 5, 2013, 06:15 PM | #1 |
Senior Member
Join Date: November 5, 2013
Location: st louis
Posts: 235
|
How old is it? Old savage single shot
Hello All, I have an older Stevens 20g shotgun and I have done my homework and still can't figure out the markings for sure. I figured the right people would be here and someone would be able to offer some insight. I have several pics I will post and hopefully someone can back up what I think this is. The A in the circle is the date code for 1949? Or maybe the 17 in the circle means something else. I've read that the date is a number and letter. Other articles say letter alone in a circle. I may be looking at just assembly marks and they mean nothing. Any Ideas, Thanks,Matt
Last edited by oldcabin; November 6, 2013 at 06:25 PM. Reason: posted in wrong spot |
November 6, 2013, 06:52 PM | #2 |
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
|
The use of a date code started in 1949 until 1968. It consist of a Letter and a number in a circle. usually located behind the hinge pin or ahead of the trigger guard. The letter A was used in ( when else ) in 1949, but no one knows what the number represents. They used this code on all double barrel shotguns, on single barrels, don't know?.
__________________
Ron James Last edited by RJay; November 6, 2013 at 07:36 PM. |
November 6, 2013, 07:43 PM | #3 |
Senior Member
Join Date: November 5, 2013
Location: st louis
Posts: 235
|
Thanks for the reply, I saw the "A" and thought it could be the mark. I hope some one regognizes it and confirms it. I guess it really doesn't matter, but then again... Makes a good story if it is a 1949 model.
|
November 6, 2013, 08:04 PM | #4 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
|
November 6, 2013, 09:05 PM | #5 |
Senior Member
Join Date: November 5, 2013
Location: st louis
Posts: 235
|
Ok Hawg.Thanks for the reply. I'll go look some more when I get home.
|
November 6, 2013, 09:51 PM | #6 |
Senior Member
Join Date: November 5, 2013
Location: st louis
Posts: 235
|
Does this help? So far its the only other mark I can find.
|
November 7, 2013, 06:49 PM | #7 |
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
|
That "A" looks like one of those numbers/marks added on the assembly line ( Inspectors Mark? ) that only God and the people who assembled it know it's meaning. It isn't a date code.
__________________
Ron James |
November 7, 2013, 11:32 PM | #8 |
Senior Member
Join Date: November 5, 2013
Location: st louis
Posts: 235
|
I found this elsewhere. Good info if it helps someone else looking for help. None of the markings on mine seem to match.
This was some good information that I found from Gun Digest :1. Stevens used plain numbers from their first double in 1878 until 1913.2. Letter prefixes crept in on the serial numbers used on both hammer and hammerless doubles from 1913 to 1939. They always signified a change in mechanical design or manufacturing process which resulted in an interesting variant.3. From 1940 to 1948 no serial numbers were used on doubles, only capital letters, usually in groups of three or four, the letter(s) sometimes enclosed in a circle, along with an inspector’s symbol ( a heart , a diamond, a spade or some such ‘shape’, on the bottom of the frame behind the hinge pin.4. From 1948 to 1968 the letter symbols under the frame were changed to a ‘Capital letter with a one or two digit number’ in a 1/4″ circle. This was a date code which you will find illustrated in the Savage-Stevens-Fox pages of your Standard Catalog of Firearms.5. From October 1968 to March 1988 Savage/Stevens/Fox B doubles are serial numbered in a completely new serial number range beginning at A000001. The six digit (always) numbers, stamped only on the left side of the frame, not on the barrels or fore end or on the wood, are preceded by capital letters from A to E. The letters do not correlate to production years. The letter prefix accompanied the Savage/Stevens/FoxB/Springfield serial number on every gun they made from 1968 on. Beginning about 1978 numbers 1 to 20 were also stamped on the three major components, frame,barrels and fore end iron, to enable the factory to keep 20 guns of like model together in a group for packing in the standard 20 gun shipping carton.Yours is one of these. Since I am interested only in double guns I stopped looking for numbers on Savage’Stevens doubles after 1988 because that’s the year they shipped their last ‘Stevens Model 311′.The highest number I have seen was on 20 gauge Stevens Model 311 Series H serial number E957971. The Savage branded imported doubles, over and unders or side by sides, are numbered differently. Each model is numbered in the range created by its manufacturer. As you probably have heard, Savage/Stevens’ production records on their older models were destroyed in a sprinkler accident about 35 years ago, according to officers of the company.To calculate an approximate number of ‘Stevens Model 311s’ that were made from 1968 to 1988 you could do this math exercise. Since Savage used 5 letters (A to E), each on 999,999 guns, they must have made about 5 million guns. Perhaps 40% were doubles in the various Savage Brands and Private Brands. That makes 2 million doubles of which I estimate 80% were Stevens 311′s. And that’s not counting production before 1968. No wonder the “311″ in its various variations is the all time favorite American made double.And think how many Stevens 311s ( and Stevens made doubles that looked like Stevens 311s but carried private brands) had already been produced in the years between 1940 (first year of the ‘true’ Stevens Model 311) and 1968, during which time they weren’t serial numbered at all! There must be at least 4 million Stevens Model 311s, in one form or another, out there! |
|
|