July 29, 2017, 11:10 AM | #1 |
Senior Member
Join Date: August 22, 2015
Location: new england
Posts: 1,159
|
The 260 Rem is DEAD !!
Dang! I just purchased a per-owned Savage in 260 Rem. The shop did not stock the ammo. No problem. I stop at cabelas to peruse the 260 options and select a 'few' loads to test for accuracy. No choices at cabelas! It is A or B, take it or leave it.
There is a grand total of one box of Remington green box, corelock, I guess and that was $40. I dont like those. There was one choice for match shooting from Hornady, 30 gr eld for $30. I look on line and Hornady does not offer white tail in 260 and just two or three loads. I digress, back at cableas I ask if they normally carry other loads. The clerk says maybe one other load. Then he points out a whole shelf of 6.5 creedmore. I might guess 20 or 30 or more loads to choose from. He says the 260 is dead, the world has gone creedmore. Ok. Now, I have a choice, reload 260 or rebarrel to 243. Not a big problem but a little surprise for me. And why am I surprised you ask? Seems I read some discussion around the 260 and no one actually came out and decalred the 260 dead. Well it is, they just did not have the funeral yet. I did read the 6.5 was very popular. I did not pick up on the flip side, the 260 was dead. It kinda too bad, I like how the 243,260,7mm,308,358 all share the same case dimensions and go/nogo gauge. Life is what it is. perhaps, I could try setting back the barrel and reaming to creedmore. That would be something new for me. And if I screw it up, get a 243 barrel. |
July 29, 2017, 11:23 AM | #2 |
Senior Member
Join Date: July 1, 2014
Posts: 179
|
I would just reload for it. It's a great round but America seems to have a love/hate relationship with any 6.5 round even when it is named imperically.
At least you can use 308 brass. I feel sorry for the creedmoor crowd in a few years . |
July 29, 2017, 11:52 AM | #3 |
Senior Member
Join Date: November 17, 2009
Location: Back in a Non-Free State
Posts: 3,133
|
Just reload. I mean, how many rounds do you plan on putting thru it in one sitting?
__________________
Simple as ABC . . . Always Be Carrying |
July 29, 2017, 01:11 PM | #4 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,805
|
The 260 simply never caught on. It is a good enough round, but the 6.5 Creedmoor addresses all of the 260's shortcomings and will be the final nail in the coffin.
If you hand load and don't want or need bullets heavier than about 120-130 gr the 260 will do anything the 6.5 will do. Brass made from 308 is readily available as are 6.5 bullets. If buying a rifle today I'd not touch a 260 with the 6.5 Creed available. But if I had one that I liked I'd probably not sell it either. The 260 was the inspiration for the 6.5 anyway. Long range target shooters discovered what the 260 could do, but to get best results required custom rifles and custom hand loads. The 6.5 Creed simply offers factory rifles and loads duplicating what the 260 target shooters were already doing. Remington screwed up the 260's chances by not offering guns and ammo for their creation. Ruger, Savage and others have offered very accurate 6.5 Creed rifles at good prices from the beginning and Hornady flooded store shelves with match grade ammo selling at very good prices.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
July 29, 2017, 01:22 PM | #5 |
Senior Member
Join Date: March 2, 2017
Posts: 1,868
|
I have never even seen a 260 or a 6.5 Creedmore. Handload either one would be good but lot easier to get brass for the 260! What are the 260 fault's that the Creedmore address? I have the 6.5x55, 6.5x06 And if I got another, it would be the 260. Remington should have called it the 6.5 Express!
|
July 29, 2017, 01:30 PM | #6 |
Senior Member
Join Date: July 1, 2014
Posts: 179
|
Jmr40,
I'm confused by your statement of the creedmoor being able to handle heavier bullets or that it is somehow superior. The Creedmoor is a great little round but it is simply the 6.5 dejour. 260, x55, and creedmoor are all ballistic brothers. The rifles differ much more than the rounds. |
July 29, 2017, 02:02 PM | #7 |
Senior Member
Join Date: January 17, 2015
Posts: 355
|
I think Magazine Writers are the reason for what is popular or what is out.
Such was the fate of the .220 Swift, still the best .22 going. Remember the Creedmore Matches. Lets call the .6.5 the 6.5 Creedmore, everyone has vague image of a long range shoots and accurate rifles. Take the .280 stick some rails on it and three or four sighting devices, on a bipod and stupid looking cut away stock and concentrate on making some 1000 yard shots. Never ind how many it takes.a Get your shooting buddies to post online about how terrific the round is and the impossible shots, rinse and repeat over six months.The Magazine Writers typewriters will rediscover the magic .260. Wally or Wala, etc the stores will have all kinds of .260 rifles and rounds in six month to a year. personally I'm thinking of shooting elephants with the .243 super duper magnum, at a thousand yards. |
July 29, 2017, 02:16 PM | #8 |
Senior Member
Join Date: August 10, 2000
Location: WI
Posts: 1,395
|
While you can get a longer bullet in the Creedmoor due to the shorter case, I have no problems loading the Berger 140vld to mag length in my Savage 260.
As mentioned, Remington screwed up when they introduced it, just like many of their other cartridges, 6mm Rem, 6.8spc, 30rar, etc. While it was never hugely popular, the 260 is far from dead, and as long as 308 brass is available it's a simple neck down to get brass. http://demigodllc.com/articles/6.5-s...6.5-creedmoor/
__________________
A plan is just a list of things that doesn't happen. |
July 29, 2017, 08:52 PM | #9 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
Reload, and it will never die.
|
July 29, 2017, 09:16 PM | #10 | |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
Quote:
Deaf
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
|
July 29, 2017, 09:45 PM | #11 |
Senior Member
Join Date: November 26, 2016
Location: Minnesota
Posts: 960
|
LONG LIVE THE 260 REMINGTON!
(Had to do it) |
July 29, 2017, 10:06 PM | #12 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
Break out the dead horse and the stick...
I've been saying it ever since the man bun of a Creedmore was first drooled over on here. The only reason the Creed exists is so the AR guys can load the long heavy bullets in 6.5mm and still fit in their magazine. That's it! Nothing else! For a bolt gun i'll take the 260 Rem anyday. Or better yet.. The 6.5X57 Mauser. Not a 257-6.5. Not the 6mm Rem 6.5. The original, not a wildcat, made in 1893 or there abouts. |
July 29, 2017, 10:08 PM | #13 |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,423
|
Reload.
Then you'll find yourself in a free fall down the rabbit hole, one day wondering how you ever got to the point of buying $2+ per piece 6mm Lee Navy brass, or building a custom annealing fixture because .577-450 is one tenth the cost when made from 24 ga brass shot shells, rather than buying bespoke Bertram or Jamison brass at $8 per case.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
July 30, 2017, 12:50 AM | #14 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,296
|
shortcomings
jmr40
What exactly are the "shortcomings" of the .260 Rem? Not being sarcastic either. Without a lot of research, seems like on the surface the .260 delivers the same bullet weights as the 6.5 CRM (of course) but with slightly higher velocities across the board. For a hunter, with typical low round counts and strings of fire as opposed to a match shooter, isn't that a decided plus over the CRM? Too, wouldn't a hunter with a bolt rifle be little concerned about cartridge length? Again, not being critical or sarcastic, just curious as to what I am missing. |
July 30, 2017, 04:38 AM | #15 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,242
|
If you look online you can find .260 Rem ammunition fairly easily.
__________________
NRA Life Member |
July 30, 2017, 06:13 AM | #16 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,585
|
Other than the variety of .264 projectiles, I havent found any good reason these 2 cartridges are any better than the .270 win.
The 6.506 comes closest, but it has only the bullet variety thing going for it. I like the modest recoil of my 6.5 Creedmoor, but its advantage over anything 6.5 is minute really. The 6.5x55 Swede is a better hunting cartidge with the history of taking moose for over a century, and I found that cartridge a pleasure to load and shoot.
__________________
Keep your Axe sharp and your powder dry. |
July 30, 2017, 09:58 AM | #17 |
Senior Member
Join Date: December 14, 2004
Location: Maine
Posts: 3,694
|
The .260 Rem is having a resurgence, due to the AR10 platform, according to this month's Guns and Ammo magazine.
I don't have any experience with the cartridge. |
July 30, 2017, 10:32 AM | #18 |
Senior Member
Join Date: December 29, 2010
Location: Shoshoni Wyoming
Posts: 2,713
|
It's not dead. It's not even sick. It's still very popular here in Wyoming for deer and antelope, and I know a few men and ladies using it for elk. The 6.5 CM works better in a NATO length detachable mag with heavy bullets than a 260 does in the same mag. But in standard bolt guns, the CM does nothing any better than the 250 and in some cases not as much. Not that it matters any, as the ballistics are so close it's irrelevant.
Personally I like the 6.5X55 better than either one. But I'd be happy with any of the 3. |
July 30, 2017, 10:52 AM | #19 | |
Senior Member
Join Date: March 2, 2017
Posts: 1,868
|
Quote:
I also like the 6.5x55 but maybe it's because I'm old. If the 260 had been around when I got my last 6.5x55, I'd maybe have got it, easy t make case's for! |
|
July 30, 2017, 11:09 AM | #20 | |
Senior Member
Join Date: March 2, 2017
Posts: 1,868
|
Quote:
|
|
July 30, 2017, 07:38 PM | #21 |
Senior Member
Join Date: November 5, 2016
Location: DFW, TX
Posts: 1,147
|
LaRue doesn't think it's dead. And they don't offer a 6.5 CM.
|
July 30, 2017, 08:21 PM | #22 | |
Senior Member
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
|
Quote:
Ammo for the .260 has always been an issue- and now that Lapua is making Creedmoor brass (with small primers for more consistent ignition) it assures the longevity of the round. However, you can't get the Creedmoor brass from anything else in a pinch, like you can necking down .308 to .260. Dead? Nope...And FWIW, the popularity of the 6.5 Creed is largely due to the price/quality of the Hornady ammo and geared to non-handloaders. The 6mm. Creedmoor long ago eclipsed it in PRS Competition. Like you said, "6.5 du jour".
__________________
Remington 700/Savage Rebarreling /Action Blueprinting 07 FFL /Mosin-Nagant Custom Shop/Bent Bolts Genuine Cerakote Applicator www.biggorillagunworks.com |
|
July 31, 2017, 01:36 AM | #23 | |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Quote:
I agree totally, though. Back in the 1970s, we thought the 264 Win Mag was super special. Then the 1980s hit, and the 6.5-06 caught on and was touted as being so much better than the 264 that only a fool would question it. Fast forward another 10-15 years and then Remington introduced the 260. Nothing better, according to the gun writers. But soon the 6.5-284 was the gun rag writers' sweetheart, so accurate and flat shooting that no one would dare gainsay it. But wait! The 6.5 Creedmore soon appeared, and the world has not been the same since! The latest 6.5 is just another flavor of the 6.5X57 or 256 Newton, both of which have been around for over a century. If I dress it up and put lipstick on it, is it still a pig?
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
|
July 31, 2017, 05:49 AM | #24 |
Senior Member
Join Date: February 7, 2008
Location: pa.
Posts: 2,450
|
i own four .260,s, a rem-7600,a rem xp100R, a rem sps 700 and a browning low wall. along with six 6.5x55,s, five swedish army rifles and a CZ 550 american. i load for all of them and have no desire to own a 6.5 CM. the big plus for me is being able to use .243-7mm08-308 brass necked up or down. eastbank.
|
July 31, 2017, 06:12 AM | #25 |
Senior Member
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
|
Just saying.
Any cartridge labeled Remington on its cartridge base is capable of being discontinued overnight. BTW: Resizing 308 brass down to a 260 is indeed difficult. That's a 4 caliber drop in swagging. 260 brass {I think} would be a easier made from annealed 243 Winchester. |
Thread Tools | Search this Thread |
|
|