The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old September 29, 2018, 05:31 PM   #1
WIN1886
Senior Member
 
Join Date: March 25, 2012
Location: Minnesota
Posts: 604
Winchester model 94 chambered 25-35 interest ?

It seems the batch of new 94's chambered in 25-35 are pretty much sold out this year . So maybe this vintage caliber still has some life and I have some interest as well . Anyone have input or personal experience with this vintage caliber they would like to share ? Much appreciated , thanks !
WIN1886 is offline  
Old September 29, 2018, 07:12 PM   #2
Art Eatman
Staff in Memoriam
 
Join Date: November 13, 1998
Location: Terlingua, TX; Thomasville, GA
Posts: 24,798
https://en.wikipedia.org/wiki/.25-35_Winchester
Art Eatman is offline  
Old September 29, 2018, 10:10 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
I have a 4-barrel set for a take-down Savage 99 that includes a 25-35 barrel. In its day, it was considered one of the great "penetrators" on big game, despite its somewhat meager energy numbers. The 117 gr 25-caliber bullets' long, heavy for caliber profile would penetrate far beyond what you could get from many other contemporary rounds according to reports. Elmer Keith related a story in one of his books about him and his brother chasing down a bull elk and finishing it off with a 25-35. One of the largest grizzly bears ever killed was killed with a 25-35, IIRC. So, it is an entirely capable cartridge.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old September 30, 2018, 05:26 AM   #4
Jack O'Conner
Senior Member
 
Join Date: July 11, 2005
Location: Manatee County, Florida
Posts: 1,976
My Aunt Lillian hunted Pennsylvania whitetails for several decades with very good success. Her rifle was a Remington slide action chambered for the 25 Remington which is sort of like a rimless 25-35. The rifle remained within her family after she died and is still in action each Fall while her grandson pursues deer in the steep country of Tioga County.

Although these two 25 caliber cartridges seem marginal on paper charts, they kill deer sized game quite well within reasonable distances.

Jack
__________________
Fire up the grill! Deer hunting IS NOT catch and release.
Jack O'Conner is offline  
Old September 30, 2018, 07:15 AM   #5
JT-AR-MG42
Senior Member
 
Join Date: December 27, 2008
Posts: 555
While roaming high desert Mule deer country, I've found as many 25-35 relic cases as 30-30.
The 25-35 was a popular deer cartridge, regardless of modern warnings about the lack of power.

Did not know about this 'new' chambering, but it does explain the new W-W brass I am seeing for sale.
I always used to use only use new 30-30 brass for forming cases to 25-35 (and further down to 219 Zipper).
Much simpler to form without the head expansion issues one gets with fired 30-30s.

JT
__________________
I hunt not to kill, but rather to have not played golf...
JT-AR-MG42 is offline  
Old September 30, 2018, 07:23 PM   #6
WIN1886
Senior Member
 
Join Date: March 25, 2012
Location: Minnesota
Posts: 604
Thanks for the replies ! Sounds like a fun caliber to consider even if factory ammunition is rather scarce .
WIN1886 is offline  
Old September 30, 2018, 07:33 PM   #7
32-20
Junior Member
 
Join Date: June 15, 2006
Location: Potter county Pa.
Posts: 14
Right after WW2 my father borrowed my Uncle's 55 Win. take down in 25-35 for doe season, when a bedded down doe stood up he shot it and it took off and ran a few yards and fell dead. When he got to where it was standing when shot there was another doe lying dead, the bullet had gone through the first doe and killed the 2nd one also. I would say the penetration was good. I always wanted that rifle and my cousin finally sold it to me this year and have been working on loads for it both jacketed and cast. It is a pleasure to shoot,very accurate with both type bullet.
32-20 is offline  
Old September 30, 2018, 07:50 PM   #8
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
My grandfather killed this deer with a Model 94 in 25-35 during the depression,



I had it measured and entered into the Boone and Crockett Record Book.

I've killed a few mulies with it when I was a kid. Wanted the gun when he passed on. But when he did, I was in Vietnam. My cousin got it. and I found out a couple years later that she pawned it.

No need to say how ticked off I was.

I've been looking for another...………...some day.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Old September 30, 2018, 08:51 PM   #9
Geezerbiker
Senior Member
 
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 1,908
I hope they make more. They were all gone long before I heard about them.

Tony
Geezerbiker is offline  
Old October 1, 2018, 01:20 AM   #10
Sure Shot Mc Gee
Senior Member
 
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
I got one. 1894 model. Built in 1903. Long barrel. Pretty on the wall piece having some extra's ordered {optionals} when purchased new.
Shot it a couple times. Too much neck on the brass after its 117 gr is seated.
If you think the 30-30 is a marginal deer cartridge? 25-35 has got to be down right eneimic in comparison.

I wouldn't dare deer hunt with mine. Such a cartridge just about garners its shooter a game retrieval.
Sure Shot Mc Gee is offline  
Old October 1, 2018, 08:15 AM   #11
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
The .25-35 was one of the first two (the other was the .30-30) cartridges that was developed for and released commercially for smokeless powder.

It was quite popular up through the 1920s, when it started to fade.

Winchester and Savage chambered lever rifles for it, Marlin brought out their own version called the .25-36, which had a slightly longer neck, and Remington brought out a rimless version for its autos and slide action rifles.

It was also chambered in Winchester single shot rifles where it was considered to be a very accurate round and was used in competitive events.

Necking down the .25-35/.30-30 to .22 caliber produced one of the first wildcats to make it into standard factory production as the .219 Zipper.

The Zipper was also later wildcatted to the even more potent Donaldson Wasp cartridge.

Both the Zipper and Wasp had good reputations for accuracy out of single shots, but like the .25, faded over time.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 1, 2018, 09:25 AM   #12
32-20
Junior Member
 
Join Date: June 15, 2006
Location: Potter county Pa.
Posts: 14
Neither the 30-30 or 25-35 are marginal for deer unless you have no confidence in your hunting abilities.
32-20 is offline  
Old October 1, 2018, 12:55 PM   #13
ThomasT
Senior Member
 
Join Date: January 22, 2009
Location: Texas
Posts: 2,753
Quote:
If you think the 30-30 is a marginal deer cartridge? 25-35 has got to be down right eneimic in comparison.
I have never thought the 30-30 was anemic at all. If I were limited to one rifle the 30-30 might be my first choice. If there is any problem with the old 30-30 its that cases don't last that long when reloading. But thats the only downside to that round. See my sig line for how well I like the 30-30.

I would like a 24-35 and looked at them when Cabelas had a couple for sale several years ago. But I wasn't about to pay what Cabelas was asking for one of them.
ThomasT is offline  
Old October 2, 2018, 12:16 PM   #14
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
"...maybe this vintage caliber still has some life..." Yep. The CAS game players will be all over it. Only issue is the lack of ammo. Winchester brand is in "Limited Production".
Hornady 100 grain Flex Tip is currently on Clearance at Midway for $22.56 per 20.
Hornady brass is on sale at $35.09 per 50.
A Redding case forming die runs $88.99. RCBS die sets are on sale at $32.84. Also at Midway.
"...or .25-35 are marginal for deer..." Especially as that's what the .25-35 was designed to do.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old October 6, 2018, 07:11 PM   #15
gw44
Senior Member
 
Join Date: March 15, 2015
Location: Michigan
Posts: 311
My friend has one that was his grandpas, I told him I would load for it but he does not want to shot it, I DO !!!!
gw44 is offline  
Old October 6, 2018, 08:12 PM   #16
Drm50
Senior Member
 
Join Date: November 10, 2014
Posts: 1,378
You know what? The same people who beat their gums on how deadly a 357mg
carbine is,are the same ones who badmouth catridges like 25/35, 25 Rem, 32/20
ect. These cartridges have put a lot of deer in freezers. They ain't bean Field guns but are reasonable woods deer guns. I've never killed a deer with a 25/35
but have shot a few with Rem 25 in M14 Rem. These deer were in the woods and
100yds or less. The result was a dead dear. Loaded with spitzer bullets I have
shot groundhogs out to 150yds rested with tang sight. If you do your part and
make a decent shot these old cartridges will do their job. They say a cartridge
doesn't make up for a poor shot. This is not true. To many use a hi-vel rifle with
expanding bullets that will blow a hole through a deers guts you can put your
fist through. The shock and blood loss will put the deer down. If it doesn't the
deer is not going to go far. If you gut shoot with a Lo-vel cartridge the deer can
go miles before it piles up. It also takes a lot less skill to shoot a Hi-vel rifle
most are going to be scoped. Not hard to drop them into 6" at 300 yds with the
average HV bolt gun/ scoped.
Drm50 is offline  
Old October 6, 2018, 08:16 PM   #17
458winshooter
Senior Member
 
Join Date: June 16, 2008
Location: Transplanted to Ridgeland,SC
Posts: 606
Interest?

Hell yeah! I have never laid eyes on one though.
458winshooter is offline  
Old October 7, 2018, 04:37 PM   #18
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 3,801
I found one at a gun show that I suspect was originally a custom order due to the shorter magazine tube. Some idiot had whacked off about 4" of the barrel and tried to pawn it off as a Winchester short rifle. Outside finish was fair and the bore was pristine. Proved to him it was not a short rifle and talked him out of it for $400. If I ever get lucky enough to find a proper barrel I'll restore it to what it was. I did have to make a front sight blade but that was easy. it's a good shooter considering my old eyeballs don't work all that well with iron sights. Serial # places it mid 1911 give or take a month. Same vintage as my Great grandfather M94 carbine which based on the serial number was made in the first two or three days of 1911. Kind of a cool old rifles even with the chopped barrel.
Paul B.
__________________
COMPROMISE IS NOT AN OPTION!
Paul B. is offline  
Old October 16, 2018, 02:45 PM   #19
Nevmavrick
Senior Member
 
Join Date: January 2, 2010
Location: Sparks, Nevada, near Reno
Posts: 183
A few years ago, I came across an M94 in .32 Special, that had been made in the early 1940s. I thought it would make a good .25/35 so I bought a Douglas 10" twist tube and cut it off at 22". The cut the magazine to 1/2 mag size, and mounted a Redfield peep sight on the receiver. I used a .25/35 Improved reamer on it and have one of the nicest little carbines I can imagine.
It uses cast 65gr and 86gr gascheck and 117gr round-nose jacketed bullets and will take small-game where I can "eat right up to the hole" and deer to 200 yards.
Wish I had an M99 Savage that I could convert the same way.
I have enough .30/30 cases to use in the .25/35, and my .219 Zipper Improved M1885 Winchester.
Have fun,
Gene
Nevmavrick is offline  
Old October 18, 2018, 09:43 AM   #20
Grant 14
Senior Member
 
Join Date: February 10, 2018
Posts: 167
Paul B, if you want to turn your short rifle into a long (26 in) rifle) let me know. I have an octagon barrel in 25 35 that needs restoration (maybe relining) but would make a cool gun. I shot a couple of rounds thru it a year ago just to see if the cases would split, and they seemed fine. No idea how the bore is. A lot of hours with a wet stone on the outside could clean it up. I had hoped to turn a Winchester low wall into a 25 35 since I have had a 94 in that caliber since I was a kid, but the pressures are too much for the low wall action. PM me your phone number if you might be interested. Grant.
Grant 14 is offline  
Old October 23, 2018, 02:15 PM   #21
shawlerbrook
Junior Member
 
Join Date: July 30, 2010
Posts: 2
If you cannot kill a deer with a 30 30 you ought to quit hunting and take up golf.
shawlerbrook is offline  
Old November 4, 2018, 11:44 PM   #22
WIN1886
Senior Member
 
Join Date: March 25, 2012
Location: Minnesota
Posts: 604
The 30 -30 is one of my favorite calibers to hunt with for deer sized game . However , Im sure the 25-35 would do fine too . I' just like the older calibers for some reason , call it nostalgia I guess .
WIN1886 is offline  
Old November 5, 2018, 12:36 AM   #23
Sure Shot Mc Gee
Senior Member
 
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
Check this article to get insight about your 25-35 want.

https://www.chuckhawks.com/25_remington.htm
Sure Shot Mc Gee is offline  
Old November 6, 2018, 12:29 AM   #24
roscoe
Senior Member
 
Join Date: July 16, 2002
Location: AZ
Posts: 575
I have long wanted a 25-35 AI. With the Hornady LeverEvolution slugs I always thought it would be a pretty potent round, and might extent the range to 250-300 meters. You gotta reload though.
roscoe is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11234 seconds with 8 queries