The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old September 14, 2017, 08:51 PM   #1
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Winchester M70 22-250

Hey All,

Picked up a vintage 1966 Winchester M70 22-250 heavy barrel for a song. I'm curious if anyone here can tell me the twist rate on this rifle? I know I can measure it, but I'm being lazy and picking brains here first.

Gonna hit the range Saturday afternoon with a variety of 50 and 55 grain ammo to see how it shoots, but it doesn't look like it has been shot much.

Thanks,

Jerry
Nunya53 is offline  
Old September 14, 2017, 08:56 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,453
14"
Plenty for 52 gr boat tails, 55 gr flatbase spitzers, some shorter 60 gr.
Jim Watson is online now  
Old September 14, 2017, 09:03 PM   #3
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Thanks Jim,

Would 62 grains be too heavy? Not a problem if so 'cause I have a 223 Wylde (1:8) that can handle up to 75 grains easily....

Jerry

Last edited by Nunya53; September 14, 2017 at 09:13 PM.
Nunya53 is offline  
Old September 14, 2017, 09:13 PM   #4
1stmar
Senior Member
 
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
It should keep them stable but may not provide the best accuracy.
1stmar is offline  
Old September 14, 2017, 09:16 PM   #5
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Thanks....I'll stick with the lighter bullets in the 22-250 and the heavier in the Wylde.

Jerry
Nunya53 is offline  
Old September 14, 2017, 10:00 PM   #6
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 28,616
I have that rifle, made a bit later (later 70s or earlier 80s), the push feed (post 64) version.

3/4" groups with 52/53gr match bullets, some days a bit less, when I'm on my game.

The only heavy bullet I've tried is the Sierra 63gr semi-spitzer. 2" or so is the best it will do. The gun was made for varmint shooting, not deer, and it has the traditional 1 in 14" twist, which works great with 55gr and under, but not so well with heavier, longer bullets.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Old September 15, 2017, 09:49 AM   #7
hagar
Senior Member
 
Join Date: February 20, 2000
Location: Colombia, SC
Posts: 745
The 64 grain Winchester PP should shoot in this barrel, it did in my Remington BDL HB. I loaded it under 38 grains of 4350, and it was actually the most accurate 200 yard load I ever found. Shot many many coyotes, a few javelina and a couple of deer with it. They should name it the "hammer of Thor" bullet because it works so well.
__________________
I don't have time for busy people
hagar is offline  
Old September 16, 2017, 04:31 PM   #8
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
To measure your twist, here's what I do:

Mark a section of your cleaning rod, somewhere in the middle, and leave 18" to 20" between the mark and the handle.
Put a jag and enough patch to keep it quite tight so that it follows the lands and grooves of your barrel when inserted.
Insert the rod from the breech end where the mark lines up with a known spot (reference point) at the back of the receiver.
Push the rod inwards and let it rotate with the grooves.
When the long line makes one full revolution, mark that spot as it reaches the reference point on your receiver.
Pull the rod out and measure between the marks.

In this way you're measuring one full revolution, and how far it takes that revolution to occur.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I suspect a thing or two... because I've seen a thing or two.
10-96 is offline  
Old September 24, 2017, 06:57 AM   #9
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Well, no so much fun at the range. I was lucky to get an MOA group at 100 yards but was expecting much better. The guy that runs the range is an Army trained marksman (sniper) so he agreed to give it a go next time I'm out there with a variety of bullets. It could be me, but I don't think so. If he can't get it to do better, then I'll have a decision to make.

I'll be back to brag or complain in about a week.

Jerry
Nunya53 is offline  
Old September 24, 2017, 07:27 AM   #10
1stmar
Senior Member
 
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
Are you reloading? I've found 35.5-36 gr of imr4064 and 53gr Sierra to work very well in several barrels.
1stmar is offline  
Old September 24, 2017, 07:55 AM   #11
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Quote:
Originally Posted by 1stmar
Are you reloading?
I do, but not for this cartridge yet.

Jerry
Nunya53 is offline  
Old September 24, 2017, 08:59 AM   #12
oldscot3
Senior Member
 
Join Date: July 1, 2007
Location: texas
Posts: 997
Locate a smith or an avid shooter in your area who has a scope and check the barrel condition. It could be the reason you got it for a song is that the barrel is at the end of its life.

Another option you can do for yourself is to take a chamber casting with Cerosafe (sp?). Make sure to get the leade with your casting.
oldscot3 is offline  
Old September 24, 2017, 09:45 AM   #13
1stmar
Senior Member
 
Join Date: March 21, 2012
Location: Connecticut
Posts: 2,378
Good point, I know when I read this my first thought was not sure I would buy a used rifle in 220 swift/22-250 or 243.. notorious barrel burners. Unless I was prepared to rebarrel or I had someone measure the throat.
1stmar is offline  
Old September 24, 2017, 05:40 PM   #14
joed
Senior Member
 
Join Date: November 28, 2014
Posts: 442
That is a pretty old rifle and the barrel may be shot out. Not sure what you paid for it but if you look around you can find a smith and a new barrel for a reasonable price, just depends what you consider reasonable. I'm guessing about $600. A new rifle will cost about that much but you'll have a better barrel.
__________________
The 6 gun was once as common as the cellphone is today, and just as annoying when it went off in the theater.
joed is offline  
Old September 24, 2017, 07:31 PM   #15
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Paid $399 for it looks like ti hadn't been out of the safe much...maybe my exceptions are too high???

Jerry
Nunya53 is offline  
Old September 24, 2017, 08:30 PM   #16
joed
Senior Member
 
Join Date: November 28, 2014
Posts: 442
The only help I can offer is every 700 or 70 I have with a wood stock has needed bedding work or they shoot slightly larger groups then 1".

You also didn't say what you have for a scope.
__________________
The 6 gun was once as common as the cellphone is today, and just as annoying when it went off in the theater.
joed is offline  
Old September 24, 2017, 09:35 PM   #17
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 3,993
Thanks to a tip from a friend, back in the 80's I bought a pre-64 model 70 in 220Swift. It was real heavy and not that accurate even with handloads. I figured it was worth more to me if I sold it and bought a Ruger 77 Varmint. I did that, had money left over, and still have the Ruger.

If you keep the rifle, try IMR4064 or R15. Hard to beat either of those powders in that caliber. And the Nosler 55 gr BT is a great bullet for varmints.
603Country is offline  
Old September 25, 2017, 07:03 AM   #18
Mobuck
Junior member
 
Join Date: February 2, 2010
Posts: 6,846
I have a 220 Swift with 1-14 twist. I wouldn't count on much accuracy with ANY bullet over 55 grains. For "good accuracy" my 1-14 is 50 grains and under.
My 22/250 is 1-12 and it will barely stabilize the 63 grain semi-spitzer (and then only at max velocity) but is around 2" with Nosler 60 grain Partitions.
Mobuck is offline  
Old September 25, 2017, 09:02 AM   #19
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 3,993
Many years with my Ruger 77 220 Swift with 1-14 twist let me try a lot of bullets. What worked very well were the 50 grainers, the 55 gr from Nosler and Sierra, and the Sierra 63 gr smp. The 63 gr shot great and was effective on a number of small to medium hogs and a few deer.

What didn't work were the 60 gr Partition (but was on the edge of stabilizing, and worked in some weather conditions), the 65 gr Sierra GK, and the 64 gr Nosler BSB.

I was sure hoping that the 64 gr BSB would stabilize, and thought it might, being just a small bit longer than the 63 gr Sierra, but it didn't. I suspect that the hidden message here is that the 63 gr Sierra is probably not overly stabilized.
603Country is offline  
Old September 25, 2017, 08:24 PM   #20
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Quote:
Originally Posted by joed
You also didn't say what you have for a scope.
Leupold VX2 3-9x40

Jerry
Nunya53 is offline  
Old September 28, 2017, 08:36 AM   #21
Rifletom
Senior Member
 
Join Date: February 11, 2011
Location: So-Cal
Posts: 786
When I had my Savage 112 FVS in.22-250, it doted on the Sierra 55gr BTHP[#1390 I believe], 35.0gr Varget, Win cases and CCI primers. Wonderfully accurate. I do not recall the twist. I'll look in my notes.
1 in 14 twist.

Last edited by Rifletom; September 28, 2017 at 08:52 AM.
Rifletom is offline  
Old September 28, 2017, 10:20 AM   #22
cptjack
Senior Member
 
Join Date: October 1, 2014
Posts: 312
I too lazy to answer
cptjack is offline  
Old September 28, 2017, 10:41 AM   #23
Don Fischer
Senior Member
 
Join Date: March 2, 2017
Posts: 1,868
I never owned a 22-250 but did have a friend's her to fool with one time. I'd read that the ideal bullet for it was a 50gr bullet due to the twist. Well I had a couple old box's of Herter 52 gr match bullet's and decided to try them, hope's were not high. But they shot great in it, I was shocked. I stuck with 50gr bullet's and accuracy was always great with them. Never did try a heavier bullet.
Don Fischer is offline  
Old October 1, 2017, 09:51 AM   #24
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Well, I tried all the fancy ammo was and wasn't impressed. However, I took it out yesterday to give it a second go with a variety of ammo to include an old box of Remington 55gr. Express Rifle someone gave me as they didn't have rifle any longer.

After checking it out at 25 yards, we went to 100 and my oldest cloverleaf three shots. Severely surprised, I asking him which ammo he used and it was the old Remington. Sure enough, the plain jane Remington is what this rifle likes.

I don't think Remington makes that exact ammo anymore, but they still sell something similar under a different name....can't wait to hit the range again.....

Jerry
Nunya53 is offline  
Old October 2, 2017, 09:20 PM   #25
Nunya53
Senior Member
 
Join Date: December 19, 2006
Location: Sherwood, AR
Posts: 207
Well, they still make the same ammo under a different name....Learned bout the code..... R222501.....that's what she likes....
Nunya53 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05955 seconds with 8 queries