The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old July 23, 2000, 01:05 AM   #1
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
7.62x25mm hot loads..
Accurate has published the 42,000 cup CZ52 loads in their new load book "Accurate #2".

These loads are hot: 700 foot pounds of energy. 86 gr Hornady .308 round nose 1913 fps 41,800 cup AA#9 13.5 gr OAL= 1.316" with Starling brass.

Speer 110 gr round nose .308 11.7 gr AA#9 1688 fps 41,800 cup OAL 1.300"

Pressures from a test barrel, velocities from a CZ52.

I have tried the first and the difference between that and the military or S&B ammo is huge. You don't need a chronograph to tell that these loads kick harder and are louder.
And the military loads were killer compared to 9mm loads with the 9mm barrels.

[This message has been edited by Clark (edited July 23, 2000).]
Clark is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03247 seconds with 10 queries