anyone using Clenzoil Field & Range to clean?

Jack Reevez · April 2, 2008, 08:58 AM

I was just wondering if anyone has used Clenzoil Field & Range Solution to clean handguns/shotguns?

Does it remove Lead and Copper at all?

Also if its a good lubricant?

thanks.

itman · April 2, 2008, 09:30 PM

I will never use anything else. It's good for every day use or for long storage. I will not use anything else.

Jack Reevez · April 3, 2008, 12:02 AM

Sir, you use it to clean your handguns or shotguns? I am looking to use sumthing to do both, Clean and Lubricate my handguns.
Also do u think it cleans out copper and lead?

Thanks

itman · April 3, 2008, 06:58 PM

Well I use the stuff on everything. Handguns, rifles, shotguns, hand tools, anything. Now I only use if for lubricant. For solvent I use hoppers(sp?) 9.

**Shane Tuttle** · April 3, 2008, 07:24 PM

Used it for some time....HATED it. I hate it more than RemOil. It doesn't work for me.

Eezox is what I use on everything. Tetra Grease on the slides as needed. Very small amount of both...

ssilicon · April 3, 2008, 07:47 PM

Quote:

Eezox is what I use on everything. Tetra Grease on the slides as needed. Very small amount of both...

Heard good things about Eezox. I tried Break Free CLP and find it seems to do a pretty good job too. Prior to trying the BFCLP, I used Outers/Gunslick solvent and oil which I always thought did a fine job. I've used Hoppes solvent too.

**Shane Tuttle** · April 4, 2008, 10:34 PM

Quote:

Heard good things about Eezox. I tried Break Free CLP and find it seems to do a pretty good job too. Prior to trying the BFCLP, I used Outers/Gunslick solvent and oil which I always thought did a fine job. I've used Hoppes solvent too.

It's been my favorite so far. Breakfree CLP isn't bad stuff. It's just waaay to messy for my taste. I do use Hoppes No.9 for bore cleaning, but everything else is what I stated.

I think there are MANY good cleaners/lubes/penetrants out there. WeaponShield comes to mind as well as Breakfree. Eezox has the characteristics that I like best for me...

April 2, 2008, 08:58 AM	#1
Jack Reevez Member Join Date: April 2, 2008 Posts: 32	anyone using Clenzoil Field & Range to clean? I was just wondering if anyone has used Clenzoil Field & Range Solution to clean handguns/shotguns? Does it remove Lead and Copper at all? Also if its a good lubricant? thanks.

April 3, 2008, 12:02 AM	#3
Jack Reevez Member Join Date: April 2, 2008 Posts: 32	Itman Sir, you use it to clean your handguns or shotguns? I am looking to use sumthing to do both, Clean and Lubricate my handguns. Also do u think it cleans out copper and lead? Thanks Last edited by Jack Reevez; April 3, 2008 at 07:12 AM.

April 3, 2008, 07:24 PM	#5
Shane Tuttle Staff Join Date: November 28, 2005 Location: Montana Posts: 9,443	Used it for some time....HATED it. I hate it more than RemOil. It doesn't work for me. Eezox is what I use on everything. Tetra Grease on the slides as needed. Very small amount of both... __________________ If it were up to me, the word "got" would be deleted from the English language. Posting and YOU: http://www.albinoblacksheep.com/flash/posting

April 2, 2008, 09:30 PM	#2
itman Senior Member Join Date: April 30, 2005 Posts: 199	I will never use anything else. It's good for every day use or for long storage. I will not use anything else.

April 3, 2008, 06:58 PM	#4
itman Senior Member Join Date: April 30, 2005 Posts: 199	Well I use the stuff on everything. Handguns, rifles, shotguns, hand tools, anything. Now I only use if for lubricant. For solvent I use hoppers(sp?) 9.