September 21, 2020, 01:01 PM | #1 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
Steel 22lr SA Revolvers
Who makes quality 22lr/22mag revolvers? I have no chance at finding one on the shelf at LGS. So, I have to order. I dont want to get a light die cast gun. I am told the Ruger Single Six #0622 is a quality steel gun. What else is out there?
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
September 21, 2020, 01:25 PM | #2 |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Uberti: https://www.uberti-usa.com/1873-cattleman-22-revolver
5.5" barrel in a 6-shot configuration, all three "classic" barrel lengths in 12-shot. Most people would probably prefer having 12 shots without reloading rather than 6. I'm old enough to have grown up watching Gene, Roy, and the Lone Ranger. My dinosaur brain still thinks a six-shooter should hold six shoots, dadgummit.
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
September 21, 2020, 01:41 PM | #3 |
Senior Member
Join Date: April 7, 2006
Posts: 10,967
|
Gene, Roy, and the Lone Ranger's six guns held 20-30 rounds!
|
September 21, 2020, 03:04 PM | #4 |
Senior Member
Join Date: September 19, 2008
Posts: 1,406
|
Ruger's Single-Six is steel and lots of it for the caliber.
__________________
-+-+-+-+-+-+-+-+-+-+-+-+-+-+ All data is flawed, some just less so. |
September 21, 2020, 03:30 PM | #5 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
@Aguilla Blanca- Do you know if the Uberti Stallion is steel as well? Uberti lists them as CH Steel. But, I have heard many are actually die cast with a CH steel appearance.
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
September 21, 2020, 04:53 PM | #6 |
Senior Member
Join Date: June 12, 2020
Posts: 1,177
|
S&W Model 17 Masterpiece
https://www.smith-wesson.com/firearm...17-masterpiece OOPs, I missed OP is looking for SA. Well... this still applies, just shoot it SA |
September 21, 2020, 05:50 PM | #7 | |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Quote:
Must have been those silver bullets. Of course, in the pilot for the television series, the Ranger killed a buffalo with one shot from his Colt.
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
|
September 21, 2020, 06:02 PM | #8 |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Looks like Pietta has them, too: http://piettausa.com/Maverick-Models_c_36.html
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
September 21, 2020, 07:06 PM | #9 |
Senior Member
Join Date: August 25, 2006
Posts: 1,819
|
I have the Uberti Stallion 6 shot, 5.5" .22. Nice shooter, once it was fixed under warranty (hammer kept slipping out of full cock, brand new gun). Keep in mind, Benelli USA refused to pay shipping, that was on MY dime. So the revolver cost me about an extra $109.00 over the original price for Fed Ex overnight shipping.
That minor gripe aside (it WAS a new gun, it should have worked properly, and they should have paid shipping), the gun is very nice. They did fix it, and fixed it properly too, function is now perfect. Walnut grips are amazing, fixed sights shoot to point of aim (I have no problem blasting rotten eggs at 15 yards or so). Its a fun little plinker, has the Swiss-safe feature (4 click hammer), cylinder bolt can be pushed in deeper to render the weapon inoperative, in case it is dropped. Case colors are ok, nothing Special. Fit and finish are ok as well, one rough spot near the loading gate latch, but for the price I can't fault Uberti. Pretty cool little Colt SAA copy in my opinion. Great small game / pest control, Saturday afternoon backyard or camp plinker. Great rat / squirrel gun around bird feeder. I like fixed sights on handguns and especially six shooters. All Steel too (I believe), no plastic or zinc castings that I can see. I sure wish Colt would introduce an all steel (not a Zinc alloy), .22 SAA revolver. I would gladly pay extra for a top of the line plinker made in the USA. Until then, I guess the Uberti Stallion will have to suffice. Last edited by shurshot; September 22, 2020 at 08:34 AM. |
September 21, 2020, 08:20 PM | #10 |
Senior Member
Join Date: February 10, 2018
Posts: 167
|
My eyes may be old, but the Uberti 12 shot photo shows a cylinder that only hold 10 shots. Maybe it is like in the movies where everybody has 30 shot revolvers. When I was a kid, my grandmother had an 8 shot 22 revolver. I think it was an H&R. Nice little gun. Grant.
|
September 21, 2020, 08:55 PM | #11 | |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Quote:
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
|
September 21, 2020, 11:30 PM | #12 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Some of the Heritage guns have steel frames. FIE used to import a small frame SA .22 with a steel frame and gorgeous case colors.
|
September 22, 2020, 05:46 AM | #13 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
Ruger Bearcat.
If you want small....really small.....look at North American Arms.
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member Last edited by darkgael; September 22, 2020 at 06:07 AM. |
September 22, 2020, 03:12 PM | #14 |
Senior Member
Join Date: February 22, 2011
Posts: 582
|
Ruger Wrangler is very inexpensive
I like the NAA Black Widow for a small but shootable pocket gun. SA .22lr/.22mag |
September 22, 2020, 04:23 PM | #15 | |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Quote:
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
|
September 22, 2020, 04:50 PM | #16 |
Senior Member
Join Date: July 22, 2010
Location: Madison, Wisconsin
Posts: 1,286
|
I had a Ruger Single Six and was disappointed at the accuracy. I believe it's because the Single Six is also convertible to the .22 WMR and... (long winded throat and bore and blah blah) and I didn't want to shoot .22 WMR!
I replaced it with a Ruger Bearcat and although it's not more accurate, it's much smaller (shorter sight radius), has fixed sights and it's light and cute as a bug. Same accuracy from a much smaller gun that's lighter to carry and a real classic. If you don't want the cute Bearcat, I would seriously look at the Ruger Single 10 as it's designed from the start to shoot .22 LR and although I think six-guns should shoot 6 (or 5) or wait... 10 is fine in a .22!
__________________
My book "The Pheasant Hunter's Action Adventure Cookbook" is now on Amazon. Tall tales, hunting tips, butchering from bird to the freezer, and recipes. |
September 22, 2020, 05:43 PM | #17 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
|
September 22, 2020, 06:36 PM | #18 |
Senior Member
Join Date: August 25, 2006
Posts: 1,819
|
I agree .... They sure are ugly!!!
|
September 22, 2020, 07:17 PM | #19 | |
Senior Member
Join Date: February 12, 2009
Location: Butte, MT
Posts: 2,614
|
Quote:
I really 'like' my Single Six.... And it is a 'proper' six shooter... not a 10 shooter, not a 12 shooter .... a six-shooter.
__________________
A clinger and deplorable, MAGA, and life NRA member. When guns are outlawed, only outlaws will have guns. Single Action .45 Colt (Sometimes colloquially referred to by its alias as the .45 'Long' Colt or .45LC). Don't leave home without it. That said, the .44Spec is right up their too... but the .45 Colt is still the king. |
|
September 22, 2020, 07:25 PM | #20 | |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Quote:
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
|
September 22, 2020, 08:59 PM | #21 |
Senior Member
Join Date: June 16, 2020
Location: Colorado
Posts: 486
|
https://www.gunbroker.com/item/878657713
https://www.gunbroker.com/item/878716123 This is a used gun but it is my favorite of the 3 posted https://www.gunbroker.com/item/879434669 |
September 23, 2020, 01:07 AM | #22 |
Senior Member
Join Date: January 3, 2014
Location: Land of the Pilgrims
Posts: 2,032
|
Howdy
The Smith and Wesson Model 17 (and its predecessor the K-22) has always been the gold standard of 22 rimfire revolvers. These are double action revolvers. Also available today in a Stainless version as the model 617. Since your question was specific to single action revolvers, the Ruger Single Six has always been a quality 22 rimfire revolver. Blued Single Sixes have always been all steel except for the grip frame and ejector rod housing, which are anodized cast aluminum. Stainless Single Sixes are all Stainless, including the grip frame and ejector rod housing. These are the old Three Screw Single Sixes, you can see the different color of the anodized aluminum grip frames. Three Screw Rugers have not been made for many years, they did not have a transfer bar in them and could only be safely loaded with five rounds with an empty chamber under the hammer. Since the 1970s, all Rugers have a transfer bar inside, so they can all be safely loaded with six (or 9 or 10, or however many rounds it takes to fill the cylinder.) You will notice that one of my old Single Sixes has an adjustable rear sight, the other two came with a rear sight that was adjustable for windage by drifting it to one side or the other. They were not adjustable for elevation. Most Single Sixes today come with adjustable sights, although I notice that one model comes with fixed sights, that are not adjustable for windage or elevation. The Ruger Wrangler is a brand new entrant in the single action rimfire market. Clearly designed to compete with the Heritage 22s in price. The Wrangler frame is aluminum, the grip frame is cast zinc alloy. The cylinder and barrel are both steel. The Cerakote finish on the Wrangler is one way the cost is kept down, it is a less expensive finish than a polished blue finish. The Wrangler is only chambered for 22 Long Rifle, it does not come with an auxiliary cylinder for 22WMR. I don't own one but I have had a chance to shoot them and I was impressed with the quality. I am not impressed with the quality of the Heritage revolvers. I will probably not be buying a Wrangler simply because I already have my old Three Screw Single Sixes. Incidentally, the Single Six was introduced in 1953. Colt had stopped producing the Single Action Army in 1940 at the start of WWII and had no intention of re-introducing it when the War ended. Colt figured there would not be much demand for the old design, and weak sales prior to WWII seemed to bear that out. What Colt did not realize was that after WWII GIs would be returning home, and many of them would take advantage of the GI Bill to get a college education and buy their first homes. And a lot of those homes would have brand new television sets in them, and the likes of Hoppy, and Roy, as well as Matt Dillon and all the other TV cowboys would be galloping across living rooms all over the country. When the Single Six showed up in 1953 all those TV sets had created a pent up demand for a single action revolver and Ruger had a hard time keeping up with the demand. In 1955 Ruger introduced their first centerfire single action revolver a 357 Magnum Blackhawk. Colt saw the handwriting on the wall and reintroduced the SAA in 1956. Personally, I prefer a revolver to be a six shooter, including my rimfires. I do have a ten shot S&W Model 617, I bought it used because I was taking part in a steel match and had to fire 8 aimed shots in 15 seconds. Could not do that with a six shooter. I don't shoot that match anymore, so the 617 does not get out much. For me, putting more than six shots in a revolver cylinder tends to make me go through way more ammunition than I need to. But that's just me. Last edited by Driftwood Johnson; September 23, 2020 at 01:13 AM. |
September 23, 2020, 01:17 AM | #23 | |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,433
|
Quote:
[Edit] Ruger's web site says the barrel is hammer forged, so I guess it is all steel.
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
|
September 23, 2020, 02:26 AM | #24 |
Senior Member
Join Date: January 3, 2014
Location: Land of the Pilgrims
Posts: 2,032
|
It is less expensive to make a cylinder and barrel from steel instead of making them from some other metal and installing sleeves. Wrangler barrels and cylinders are steel.
|
October 8, 2020, 08:06 AM | #25 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
I went back and forth with this for a while. Found something that fits the need pretty well, blued Single Six convertible. I would have liked to have had a color case hardened frame, this is close enough. I could always send it to Turnbul.
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
Thread Tools | Search this Thread |
|
|