|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 19, 2010, 05:28 PM | #1 |
Senior Member
Join Date: May 17, 2007
Location: great white north
Posts: 316
|
Savage model1899 25-35 worth restoring?
So I've inherited this savage takedown with a curved butt plate. It sits in pieces in a box, in pretty rough shape, the bluing is gone and theres a bit of pitting, the stock is pretty dinged up.
How do i find out when this gun was made and if it is worth repairing? Thanks |
December 19, 2010, 08:45 PM | #2 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,620
|
Go on gun broker and find out what they are asking for them. You will restore it.
|
December 19, 2010, 11:42 PM | #3 |
Senior Member
Join Date: May 17, 2007
Location: great white north
Posts: 316
|
It was made in 1910 according to the serial #, and someone has apparently already started sanding it down
|
December 19, 2010, 11:50 PM | #4 |
Senior Member
Join Date: May 17, 2007
Location: great white north
Posts: 316
|
|
December 19, 2010, 11:56 PM | #5 |
Senior Member
Join Date: May 17, 2007
Location: great white north
Posts: 316
|
The stock is pretty beat up also
|
December 20, 2010, 05:14 AM | #6 |
Senior Member
Join Date: November 13, 2006
Posts: 8,288
|
I'm just another shooter,not an expert,so,just an opinion.
It is what it is,how you received it.You will get some unhappy feedback about "If only....." Whats done is done.Now what? Condition is very important on collector rifles.It was not pristine.The wear of it's honest history lowered the value,but it may have still been best to not sand on it.An honest original may still be a shooter,and there are ways to gently optimize the original patina. Even a careful,well done reblue won't quite go with the original wood. You will need a gunsmith to see if it will be mechanically safe and sound for a shooter. From there,I think I would go with trying to restore an aged patina look,not doing any harm,letting it be what it is. If I was doing it for myself,I have used a Mark Lee browning solution for muzzle loaders,but wih a boiling water tank,and carding the rust.I get a rich black coffee finish.I would not try to polish out all the flaws,maybe just deal with any sanding scratches.Murphy's oil soap,without getting the wood water soaked,or even a little acetone or laquer thinner to just clean some of the old oil off the wood,then some fresh oiling and rubbing. |
December 20, 2010, 10:40 AM | #7 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Stop and consider whether or not you want to take the time to do it right. Your rifle needs new wood, and it needs to be reblued. Total for that will run about $400 if you do some of the work yourself ($150 for wood, $100 for rebluing, and a few parts, and lots of work), more if you just farm it out. You will likely have more invested in the rifle than it is worth (reblued 99s sell for about $350).
If you are interested in selling it as is, I am in the market for an 1899.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
December 22, 2010, 04:29 PM | #8 |
Member
Join Date: November 25, 2010
Posts: 19
|
A well done restoration will never return your money from a collector in North America. It's a shooter if the barrel isn't roached and is otherwise safe to shoot.
|
|
|