The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools Search this Thread
Old January 10, 2019, 01:33 PM   #1
Jayhawkhuntclub
Senior Member
 
Join Date: December 13, 2007
Posts: 578
Heaviest bullet for ar15 in 5.56 (single feed)?

I know magazines will take Hornady OTM and some 77 gr bullets. But what about single feed? What's the heaviest bullet most ar15s can chamber?
Jayhawkhuntclub is offline  
Old January 10, 2019, 01:45 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 15,474
Mine is a 6.5 twist made for 90 grain SMK and VLD.
I had the throat lengthened to allow longer OAL for more powder space but it did not make much difference.
A regular A2 7 twist should handle 80-82 grain bullets.
Jim Watson is online now  
Old January 10, 2019, 02:00 PM   #3
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,040
I've shot 80s and 90s out of my 1:7s, worked good.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old January 10, 2019, 06:42 PM   #4
lordmorgul
Senior Member
 
Join Date: August 18, 2016
Posts: 152
Heaviest bullet for ar15 in 5.56 (single feed)?

Chambering by single feed is not the main issue but stability when fired, and good engagement in case mouth (cylindrical area of the bullet). Start with stability, bullet length, barrel twist, and then load longest bullet your specific barrel can handle stabilizing because why bother launching it otherwise.

I have 1:8 twist 75gr Hornady ELD bullets working in 20” barrel. It’s listed as not stable in 1:8 by Hornady but I think it is just marginal and seems ok in my shooting environment and barrel. They make up to 90 gr ELD with long ogives so it’s relatively easy to chamber a bullet without being lodged into the rifling lands but be something too long to stabilize.

I’ve measured these bullet lengths, it is not super easy to find them for all bullets.

Hornady 75 gr ELD-M 1.116”, G1 .43, G7 .220
Hornady 70 gr GMX 1.047”, G1 .350
Hornady 73 gr ELD-M 1.056”, G1 .398, G7 .200
Hornady 75 gr BTHP OTM 0.988” G1 .395



Andrew - Lancaster, CA
NRA Life Member, Calguns.net contributor, CGF / SAF / CRPA / FPC / NAGR / NRA-ILA contributor, USCCA member

Last edited by lordmorgul; January 10, 2019 at 06:50 PM.
lordmorgul is online now  
Old January 11, 2019, 05:30 PM   #5
Jayhawkhuntclub
Senior Member
 
Join Date: December 13, 2007
Posts: 578
Thanks for all the information. My twist is 1:7 so I think I'm good there.
Jayhawkhuntclub is offline  
Old January 13, 2019, 11:41 AM   #6
bfoosh006
Senior Member
 
Join Date: February 17, 2009
Posts: 947
Remember... there is a lot of difference throat / freebore between the various manufacturers.

What heavy weight .224 bullet works for one barrel may not work well in a shorter throated barrel.

And your OAL will be effected as well from the variety of chamber dimensions.
bfoosh006 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06304 seconds with 10 queries