The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old November 4, 2018, 07:34 AM   #1
Doc Holliday 1950
Senior Member
 
Join Date: June 16, 2014
Location: Bout as south as it gets
Posts: 1,139
need advice on shoulder holster

Way back in the stone age ( 1970 ) I sometimes carried using a sholder holster for my 4" colt 357 in magnum. As I remember it was very comfortable but for the life of me I can't remember who made it. The 2 carries would be for either my G19 or my S&W 686+ 3". I think the Smith would be the one I'd concentrate on.
I'd appreciate everyone's input on those who carry this way & which one they recommend.
I live in South East Florida so I'd be using it when the temp gets down into the low 60's & below.
As always, all respones are welcome.
__________________
Shoot well and be Accurate,

Doc
Doc Holliday 1950 is offline  
Old November 4, 2018, 07:52 AM   #2
ms6852
Senior Member
 
Join Date: April 3, 2010
Location: Texas
Posts: 910
Try typing "Miami style shoulder holster". That should be enough to give you the info you need. Here is a link for one company.
https://www.galcogunleather.com/miam..._8_2_1211.html
__________________
ONLY TWO DEFINING FORCES HAVE GIVEN UP THEIR LIVES FOR YOU. ONE IS JESUS CHRIST FOR YOUR SOUL AND THE OTHER IS THE AMERICAN SOLDIER FOR YOUR FREEDOM.
ms6852 is offline  
Old November 4, 2018, 08:25 AM   #3
Schlitz 45
Member
 
Join Date: January 14, 2018
Location: Colorado
Posts: 80
Maybe a Dirty Harry style holster? I’d consider one if I had 686

Last edited by Schlitz 45; November 4, 2018 at 04:26 PM.
Schlitz 45 is offline  
Old November 4, 2018, 12:40 PM   #4
heyjoe
Senior Member
 
Join Date: November 20, 2007
Posts: 380
wild guns leather...isnt that the maker that people have so many problems getting their holster from after paying.
heyjoe is offline  
Old November 4, 2018, 01:01 PM   #5
armednfree
Senior Member
 
Join Date: October 30, 2016
Posts: 112
Jackass rig.
armednfree is offline  
Old November 4, 2018, 02:24 PM   #6
TRX
Senior Member
 
Join Date: September 24, 2008
Posts: 293
Here's a page I put together with pictures of different types of shoulder rigs: http://dave2.freeshell.org/tech1/shoulder/holsters.htm

After going through several, I've found I greatly prefer the single-strap type over the X type.

Also, the "upside down" types are *way* more convenient than the pull-forward or pull-up types. Most upside downs are for 2" snubbies, based on the old "Brown Shoe Company" design, but Ken Null and DeSantis make some for longer barreled revolvers and autoloaders.

What I've determined is that most of the people who design and make shoulder rigs don't actually wear them, and that while the guns may be artfully draped over dummies or models, they're going to rotated back under the point of your shoulder after you move around a big. "Gravity always wins."

You can also crossbreed some types of holster with other brands of rigging. It can be expensive given the premium for shoulder rigs to begin with, but if that's what it takes...
TRX is offline  
Old November 4, 2018, 04:29 PM   #7
Schlitz 45
Member
 
Join Date: January 14, 2018
Location: Colorado
Posts: 80
I did a search on wild guns leather/lawman and see others have had issues with them, I’ve altered my post & removed the link-I didn’t want to give anyone a bum steer just always liked that style shoulder holster for a bigger revolver.
Schlitz 45 is offline  
Old November 4, 2018, 06:27 PM   #8
shuvelrider
Senior Member
 
Join Date: October 2, 2011
Posts: 107
https://www.barsonyholsters.com/cart.php Might give these people a look. I have a shoulder holster from them for my Smith M586 with 6" barrel. I wear it under a leather vest when I ride the motorcycle.
shuvelrider is offline  
Old November 4, 2018, 08:17 PM   #9
Bottom Gun
Senior Member
 
Join Date: October 13, 1998
Location: Elgin, Arizona
Posts: 1,000
Smith & Wesson branded some leather goods back then and I had a couple of their holsters. They sold shoulder rigs that were VERY comfortable. I wore out two of them carrying my model 29.
I’ve since tried a number of different shoulder rigs but none has suited me like those old S&W holsters.
Unfortunately they are no longer made but I do see some on eBay from time to time.
__________________
NRA Life Member
Bottom Gun is offline  
Old November 5, 2018, 09:31 AM   #10
TxFlyFish
Senior Member
 
Join Date: October 18, 2011
Posts: 1,093
TRX what are some good and comfortable single strap designs? That link is very useful
TxFlyFish is offline  
Old November 7, 2018, 06:44 PM   #11
DaleA
Senior Member
 
Join Date: September 12, 2002
Location: Twin Cities, MN
Posts: 4,207
TRX---that's a marvelous display of shoulder holsters. I'm bookmarking it.
Thanks!
DaleA is offline  
Old November 7, 2018, 09:54 PM   #12
RickB
Senior Member
 
Join Date: March 1, 2000
Location: Western WA
Posts: 7,740
I've been using a Galco Jackass for over fifteen years, and I like the fit, comfort, and the draw, but I'm rethinking horizontal holsters that leave you sweeping everyone around you with a loaded gun.
I have an old, vertical, holster that uses a surrounding "spring" to retain the gun - think Dirty Harry, Untouchables - and I think it's a better way to go for safety, and there are no snaps or straps.
__________________
Runs off at the mouth about anything 1911 related on this site and half the time is flat out wrong.
RickB is offline  
Old November 7, 2018, 11:21 PM   #13
Cosmodragoon
Senior Member
 
Join Date: March 18, 2013
Location: Northeastern US
Posts: 1,504
Nice work, TRX!

I also prefer vertical carry. One issue I've had is that I like to wear my gun high. I like the front of the gun grip to be about even with the bottom of my shirt pocket. Between that and being a larger guy, getting the adjustments just right on some of the less expensive models can be a real challenge. I've added a few stitches here and there on a few of these and it helps.

One problem I've had with the Uncle Mike's Pro-Pak is that the elastic belt straps are too slippery. The little doodad that is supposed to hold them at length just doesn't hold. This is solved with a stitch or just tying them at the desired length.

I know getting something custom made could do a world of good but I often wear a slightly modified nylon model all day in reasonable comfort. I also like that nylon and some of the other synthetic materials in the cheapies can be washed without worry.
Cosmodragoon is offline  
Old November 8, 2018, 01:32 AM   #14
Sgt127
Senior Member
 
Join Date: May 13, 2002
Posts: 906
Well don TRX!

I’ve always been a fan of the Bianchi X15.
Sgt127 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06932 seconds with 10 queries