|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
February 24, 2020, 01:08 AM | #1 |
Senior Member
Join Date: October 22, 2016
Posts: 3,883
|
Best caliber(s) for a single shot?
I've seen a few posts on forums the past couple months of people dumping revolvers for single shots for the accuracy and quality. I can understand that, I too have had accuracy and quality issues on new revolvers. I've thought about a single shot pistol for years, usually in a rifle caliber tho like .308, but that doesn't exactly sound like a fun gun to shoot more than 10 rounds.
Not saying I need this to be low recoil, but not .308 levels from a 3.5 lb pistol. So, what caliber(s) would be best for a single shot like the Thompson Center? .45 Colt seems popular, but I feel .454 would be better. I believe there are some .357 Maximum barrels out there, that sounds like a great round for a single shot. I can go with pretty much anything, but I don't have much interest in .41 or .44 Mags or any rimfire.
__________________
"We always think there's gonna be more time... then it runs out."
|
February 24, 2020, 02:37 AM | #2 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,971
|
A .454 will recoil more than a .308 based on muzzle momentum numbers.
__________________
Do you know about the TEXAS State Rifle Association?
|
February 24, 2020, 08:23 AM | #3 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
I've got a 7mm-08 Encore pistol. Recoil is quite manageable with normal factory ammo. It is even better with the Hornady Lite ammo. Even with the lite ammo, it is still a respectable 100+ yd deer platform.
|
February 24, 2020, 08:36 AM | #4 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
My favorite....if you can find one and if you are willing to load your own: 30 Herrett.
Otherwise...the .30-30 Win or the .30-30 AI. Full power .44s and .45s shot from a Contender are scope breakers. I do not mind .44s from a Ruger SBH but they are no fun from a 10" Contender. Pete
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member |
February 24, 2020, 08:39 AM | #5 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
Here's the big question: Best for what? Plinking, squirrels, woodchucks, prairie dogs, brown bear? The question isn't very specific. I've had three TC Contenders and numerous barrels for them. Each one did different things. Not all single shot pistols are "accurate" under all conditions. Try shooting a Contender off hand and then a bolt action single shot. Two different animals. The bigger, heavier single shot handguns pretty much only work shooting off a rest. Might as well carry a rifle. One size doesn't fit all. What kind of accuracy are you looking for? I've got several revolvers that will shoot an inch at 50 yards off bags, and if I can do my part I can shoot deer with them out to a hundred. Comparing single shot handguns to revolvers is comparing apples to oranges.
|
February 24, 2020, 08:43 AM | #6 |
Senior Member
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 4,307
|
I have a TC Encore. Had a 15" .308 but sold it. Have a 10" .414 SuperMag and it is a hoot.
|
February 24, 2020, 01:04 PM | #7 |
Senior Member
Join Date: December 22, 2015
Posts: 887
|
I've shot TCs in 460 S&W, 7mm-08, and 223. Didn't find the 460 or 7mm "fun". But I also don't care much for the TC single shot ergonomics in general.
Based on my limited experience with SS handguns and long guns, I do prefer a rimmed cartridge. They just seem better suited to a single shot firearm. |
February 24, 2020, 01:22 PM | #8 | |
Senior Member
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
|
I have pistol barrels for my G2 TC Contender from 22 LR to 45-70.
My choice so far for deer is 7-30 Waters. But like almost all choices for a Contender, handloading is a must for the best accuracy, and performance. The 7-30 choice may change as I work more with a couple other TC Contender classics. 30 Harrett, and 357 Harret. The 10" 45-70 barrel is pretty much reserved to intimidate people at the range, and possible use if I am trapped in a phone booth by a Sasquatch! Quote:
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING! Last edited by Cheapshooter; February 24, 2020 at 01:27 PM. |
|
February 24, 2020, 01:29 PM | #9 |
Senior Member
Join Date: November 30, 2012
Location: Baton Rouge, Louisiana
Posts: 1,751
|
A good buddy has a TC and over the years picked up several interesting barrels .
We both reload so if he didn't have dies for a new barrel then usually I would . I'm going to list the rounds I enjoyed shooting the most : 22 Hornet 32-20 WCF 38 spcl / 357 magnum 41 magnum .410 shotgun 45 Colt 30-30 Winchester All of our shooting was done with cast bullets ( except the Hornet ) at paper targets , tin cans and plinking . He even went hunting for hogs with the 30-30 but never actually got to shoot any that day...hogs learn to avoid people during hunting season. Gary Last edited by gwpercle; February 24, 2020 at 01:36 PM. |
February 25, 2020, 12:18 AM | #10 |
Senior Member
Join Date: September 5, 2006
Posts: 663
|
I recommend 6.8 special. It’s a rifle round that keeps its speed from short barrels and won’t beat you up.
|
February 25, 2020, 12:59 AM | #11 | |
Senior Member
Join Date: October 22, 2016
Posts: 3,883
|
Quote:
I guess what I'm looking for is something that is powerful and accurate, cheap to shoot and reload, fun for plinking, but also effective for hunting applications. Above all, something that would be fun to shoot and cool to own.
__________________
"We always think there's gonna be more time... then it runs out."
|
|
February 25, 2020, 05:46 AM | #12 |
Senior Member
Join Date: May 31, 2013
Location: East Texas
Posts: 1,705
|
I shot 7/TCU for years, and it was an effective round in competition as far as accuracy and had lots of potential for other uses. It was very effective in a 10" or 14" barrel and not bad recoil.
|
February 25, 2020, 08:16 AM | #13 |
Senior Member
Join Date: June 15, 2019
Location: NW Iowa
Posts: 210
|
The 6.5 Grendel does well in this format. Have to get custom made barrels, but great shooter without trying to rip your arm off. Accurate and plenty of punch for deer. After seeing/trying one, I am tempted.
|
February 25, 2020, 09:40 AM | #14 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
I've shot almost sixty deer with the .357mag in several different handguns. Most were shot with revolvers, but probably nine or ten were shot with TC Contenders using .357mag, 7tcu, and 30-30. All in all, I think the best caliber for a hunting single shot handgun is the .357mag. The reason? No problem getting ammo, reloading ammo, it will also shoot 38spl if you're so inclined. I've never lost even one deer shot with that cartridge, and some of the deer shot with it were quite large. It's pleasant to shoot and economical. For plinking loads, the light 38spl type loads are a lot of fun to shoot and recoil is negligible. As an added bonus with the TC, you can add more barrels in rimfire up through some much larger calibers. If you find the TC Contender isn't exactly what you want because you want to shoot some really big boomers, get the TC Encore. You can shoot all the stuff the Contender shoots as well as things like the 308, 7mm mag, and things of that sort.
|
February 25, 2020, 12:22 PM | #15 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,800
|
Quote:
I spent about 35 years ignoring the Contender, because it was "only" a single shot. Then, one day I handled one, and wow, what a sweet trigger it had!! Since then I have gotten a couple of frames and barrels in .22LR .22 Hornet .222 Rem 9mm Luger .357 Mag .44 Mag .45 Colt .45 Colt/.410 .45 Win Mag .30-30 .45-70 Also have a Rem XP-100 in .221 Fireball. I do recommend getting Pachmayr rubber grips for shooting heavier recoiling calibers. Also be aware that despite the size of the Contender, it is lighter than a S&W N frame, and so recoil has a much different feel. I you think you know how to shoot a pistol, get a Contender with a .22LR barrel (10" is good) shoot offhand, and it will teach you how much you don't know. A 10" octagon (pencil) barrel .44 Mag will try to achieve low earth orbit! First time I shot that one with full house loads, I said a bad word out loud (and rather loundly) at the range! By contrast the heavy barrel 14" .45-70 (with lots of little holes in the front end) is a solid slam in your hand, but doesn't jump UP as much as the .44 Mag. HOWEVER, neither is for the beginner. (unless you handload and will load "down" to start with). One young friend, after watching me shoot several rounds, tried my .45-70, and while he did a fair job locking his wrists, his elbows weren't and he wacked himself a good one in the nose with the red dot sight. Bled a bit, too! He did hit the target, and after we got the bleeding (and the laughing) stopped, he asked for another. Hit with that one, too, and ONLY hit the target, that time, My 9mm barrel is a 6" and looks short on the Contender, rather "piratey" (ArrrH!! Repel boarders! ARRR!) also shoot groups smaller than every semi auto 9mm I've run across, have won a few bets with it. (I bet my 9mm will group better than yours! ) Forget speed, forget follow up shots, focus on one PERFECTLY placed shot. They'll do their part, the rest is up to you. I, personally don't favor the .308 or larger in my pistols, simply too much wasted powder for what you get. its a whole different level of shooting and tis easy to go for "too much gun" to start off with. This is one of the benefits to the Contender / Encore pistols, multiple calibers with a barrel swap. Start with something "light" like a regular pistol round (.357 is a fine choice) and get some experience, then decide if moving up to a rifle class round is something you want to do.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
February 25, 2020, 12:50 PM | #16 | |
Senior Member
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
|
Quote:
But be warned, as you may have noticed by several of the previous posts, buying the easily changed barrels is habit forming! My list: 22 LR 14" Match 22 Hornet 223 Remington 7-30 Waters 357 Magnum 357 Harrett 35 Remington 44 Magnum 45-70
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING! |
|
February 25, 2020, 02:03 PM | #17 |
Senior Member
Join Date: April 2, 2018
Posts: 252
|
The cartridge is not the only selection criteria and if I were selecting a handgun, I'm quite certain that a limited availability for production variants of the model type I selected would narrow my choices considerably.
Whether a single-shot pistol or rifle, I think it should have a rimmed cartridge or at least belted. Rims and belts are better and easier to headspace on rather than necks and mouths, and as long as there is no magazine to feed from, I can't think of a reason not to prefer a rim or belt. Bottle-neck, over-bore cartridges can achieve a high velocity, flat trajectory, long-range and good terminal effect, but typically only with quite a bit of barrel length. If it's going to be under 10" barrel length, straight-wall or tapered cartridges might be just as good. The lower velocity of such guns usually calls for 35 or larger caliber, ~150 gr. or heavier bullets and the practical range is limited to ~150 yards or less. Many people tend to favor 40 caliber and over with bullets over 200 grains. It's not hard for these short guns to throw heavy lead, but it's quite impractical for it to throw any weight supersonic much past a couple hundred yards. For example, even a 50 grain 5.56x45 from a 6" barrel is transonic just a little after 200 yards. So it makes sense to either go long, or go heavy. The .30-30 could be a good candidate, especially with long, heavy, low-drag bullets that aren't normally loaded in this cartridge for the sake of tubular magazines. But the .30-30's powder capacity is a limiting factor. The .30-40 Krag or .303 British might be better, but the recoil must become quite stout. The .32 Winchester Special (necked-up .30-30) has an advantage in bullet weight, but there's far fewer bullets in that caliber. Once you get into .35, .40, .44 caliber and up, the magnum handgun cartridges make more sense than any rifle cartridge. I personally like the design philosophy behind the .500 Linebaugh and .480 Ruger, but there's more market momentum behind the S&W magnums at this point. I don't think you can go wrong with .44 Magnum, but at this point I don't have anything new to say. |
February 25, 2020, 02:43 PM | #18 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,800
|
Quote:
With single shot pistols in rifle calibers you are looking a typically 15" barrels and under. 14" and even 10" are pretty common and while you can burn more powder most of us feel it is a waste, as you are seriously into the area of diminishing returns. Especially in the shorter barrels. So, yes while the Krag or .303 Brit run more powder than the .30-30 very little velocity gain is realized in the pistol barrel. It took me a long time to understand why Remington created the ,.221 Fireball, for a long time I just figured they did it for something else to sell us, and why not just run the .222 or even .223 from their XP-100 pistol??? When it finally dawned on me, it was a "duh..!" moment. It was the 10" barrel!!! The .221 Fireball case holds all the usable powder in that barrel length. The larger .222Rem case burns 10% (or more) powder and reaches the SAME velocity with 45 & 50gr bullets. I suspect using a Krag or Brit case over a .30-30 would have similar results. It's a matter of efficiency vs. practical results. Burning 10-15% more powder and getting the same velocity, or a 2-5% increase just isn't efficient. Now, moving further up to something like a .308 (in an Encore) you do get enough of a velocity gain (with the longer barrel 14-15") to actually be useful, but you are burning significantly more powder (perhaps 50gr vs 30), and a large portion of it is literally going to waste. Maybe that doesn't matter to you. But it does to some of us.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
February 25, 2020, 04:26 PM | #19 |
Senior Member
Join Date: April 2, 2018
Posts: 252
|
The powder burn rate matters too. The efficiency of rifle powders in a short (10") barrel is abysmal, but there are slow magnum 'handgun' powders that can be used instead. Powders like Lil'Gun, CFE BLK, even H110. Those won't necessarily produce the highest velocity possible, but they can be more efficient than an extruded rifle powder. These powders require less case capacity to reach maximum chamber pressures, but I concede they won't necessarily achieve the highest velocities.
The problem with the .30-30 I mentioned is the case capacity when using heavy bullets. Because high velocities will not be achieved with short barrels, heavier bullets are called for to have a terminal effect to make it a suitable substitute for a magnum handgun (presumably for hunting medium game). Those heavier bullets (>200gr.) leave even less powder space. The chief disadvantage of the longer Krag or Brit cases is the longer receiver, action and magazines they require, and these things are just not applicable to a single-shot. The 303 has the same case capacity as 308. Assuming we're not talking about re-using an antique receiver but chambering a modern handgun, there's no difference in pressure limits. The Krag has a little more capacity than the other two and again, the pressure limit is arcane and wouldn't apply to a modern action. I don't mean to emphatically advocate the Krag or Brit. They are clearly better single-shot rifle cartridges than they would be good handgun cartridges. If the barrel is truly short, the cartridges that make the most sense as a substitute for a big bore revolver are the same big-bore magnum handgun cartridges but used in a single-shot. |
February 25, 2020, 08:21 PM | #20 | ||
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,800
|
Quote:
And that gives a lot of people the creepy-crawlies. Lets assume you have a 50K psi safe action. Fine. Now run that 30-30 up to 50Kpsi or the Krag, or the Bit, or.... yes indeed you'll get a significant increase in velocity if you do that. NOW, chop that increase back because you're using a 14" or even a 10" barrel and see what you get. You get a LOT of wasted powder. I'm not trying to make a case for the efficiency of the .30-30, either. Its not very efficient in short barrels. Take a look at the .30 Herrett. Made from a shortened "blown out" .30-30, in a 10" barrel it gets 300fps or so more velocity than the .30-30 and does so burning about 10% LESS powder. Quote:
Assuming you actually NEED that heavy bullet in the first place. That is a matter of personal desire for a specific performance, and a whole lot of dead deer over the last few centuries have been taken with "lesser" performing loads, including flintlocks with round balls. The one place where rifle rounds like the .30-30 have an advantage over big bore pistol rounds from equal length barrels is their trajectory.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
||
February 25, 2020, 11:52 PM | #21 |
Senior Member
Join Date: December 10, 1999
Location: California
Posts: 2,714
|
I really liked the 7/TCU in my 10" silhouette gun.
I no longer have it or shoot silhouette but it was very accurate. I always wondered why Ruger didn't do the Mini 14 in it. Probably OAL of cartridge but what a sweet load it would have been. |
February 26, 2020, 12:57 AM | #22 | |
Senior Member
Join Date: October 22, 2016
Posts: 3,883
|
Quote:
.223/5.56 is an obvious one here, but along with what some others have said, I do prefer a rim. It's one reason I've gravitated a lot to the .357 Maximum. It's got good power, maybe not big game stopping power, but enough for any situation I could possibly use it for.
__________________
"We always think there's gonna be more time... then it runs out."
|
|
February 26, 2020, 03:49 AM | #23 | ||
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,800
|
Quote:
I'm not just interested in things I can get free brass for, its a single shot pistol, 100 new cases will last years for most of us. Quote:
The rimless rounds I have for my Contender are .222Rem, 9mm Luger and .45 Win Mag. had a .223 but didn't care for it, it was a heavy 14" and there wasn't anything it could do I couldn't do with my .222 except shoot .223 Never had any issues with headspace, I FL size. I can't think of any belted case other than .224 Wby suitable to use in a Contender. In an Encore that's a different matter. It's always a trade off, you won't ever get full rifle power but then you aren't carrying a rifle, its a (largish) handgun.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
||
February 26, 2020, 06:56 AM | #24 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
About pressure and the Contender. The Contender receiver is not rated for a particular pressure overall. It is not a "50Kpsi" unit. What the standing breech will sustain is dependent on the size of the casehead and the thrust of the case against the breech. So 50kpsi from a case the size of a .223 is one thing, larger cases, like the .45-70, are more limited. "Ruger Only" loads are a no-no. The pressure limit of that case is around 28kpsi.
Pete
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member |
February 26, 2020, 01:43 PM | #25 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Nobody is "dumping revolvers for single shots" except maybe for hunting.
"...from a 3.5 lb pistol..." That'd be slightly more than your typical handgun. However, a .45 Colt +P, 250 grain bullet at 1200 FPS out of a 2.75 pound hand gun(closest there is on the chart) has 17.0 ft-lbs. of recoil energy. A .454 Casull, 260 grain bullet at 1800 FPS out of a 3.2 pound firearm has 39.0 ft-lbs. of recoil energy. A .45 Colt 255 LFP at 914 out of a 2.75 lb. handgun has 10.4 ft-lbs.
__________________
Spelling and grammar count! |
Thread Tools | Search this Thread |
|
|