|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 15, 2009, 10:27 PM | #1 |
Senior Member
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
|
Need Bayard 1908 grip screw?
Anyone know where I can get one? These grips are fastened with 2 screws each, and the grip is a hard rubber type material maybe bakelite. Thanks.
Joe
__________________
We live in the greatest country on Earth- always be thankful! |
July 16, 2009, 09:24 AM | #2 |
Senior Member
Join Date: January 31, 2000
Location: Live Free or Die, Baby!
Posts: 1,550
|
Not listed at Numrich.
You're probably best off taking one with you and matching as best as possible at the hardware store. |
July 16, 2009, 02:58 PM | #3 |
Senior Member
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
|
That is what I thought too. There is a website that manufactures replacement grips and has the screws, I just found it today. If I cannot get any from some other source I will try there. One of the grips is cracked anyway so I could just buy replacements with the screws.
Joe
__________________
We live in the greatest country on Earth- always be thankful! |
July 16, 2009, 03:14 PM | #4 |
Senior Member
Join Date: January 31, 2000
Location: Live Free or Die, Baby!
Posts: 1,550
|
Cool.
What's the Website? |
July 16, 2009, 08:07 PM | #5 |
Senior Member
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
|
Should have put it in the other post.
http://vintagegungrips.net/es.html Prices seem reasonable for what I need. Joe
__________________
We live in the greatest country on Earth- always be thankful! |
April 1, 2011, 02:54 PM | #6 |
Junior Member
Join Date: April 1, 2011
Posts: 1
|
Need Bayard 1908 grip screws
I ordered these grips from vintage gun grips. the screws were not included. I got this gun with cracked pearl handle greps and trying to restore it with the standard grips. the screws are in bad shape and are longer when I tried to put on the standard grips. I did find them at "numrich" but are out of stock. and vintage gun has no clue on which screws.
Does anyone know what the type and size they should be? |
April 1, 2011, 03:20 PM | #7 |
Senior Member
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
|
I never found any either. Other projects got in the way and this one sat in the safe. I will be interested to see what you can find out.
Joe
__________________
We live in the greatest country on Earth- always be thankful! |
April 1, 2011, 03:32 PM | #8 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
The screws are metric threads. You may be able to find exactly what you need by taking apart an old VCR or tape deck. I have also found that old, broken typewriters are a wealth of odd screws that work in guns.
|
April 1, 2011, 08:53 PM | #9 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Old grip screws are often non-standard and the chance of finding one at a hardware store is almost nil. Not only would that screw be metric, it is probably not even a common metric size. As an example, look at our common M1911 pistol. The original GI grip screws are .150"x50; try finding that at a hardware store.
Where originality is not a problem, you can often find a screw whose head can be altered and then tap the hole out for whatever thread it uses. Of course, that gives you an "odd size" screw, but it might be the only choice. Jim |
April 2, 2011, 01:11 AM | #10 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
Here's some info that might help you:
I took the screws off of my Bayard and, as best as I can tell, they are M3x0.6 thread (a metric standard size), the shank diameter is .105", the head diameter is .196 +/- .001, the length of the threaded portion of the shank is .132" and the thickness of the screw head is .070 +/- .002. The screws on my example are cheese head screws, i.e. they are flat, not domed. I have no idea if they are the originals or not, as the gun has some WW I German unit markings on the rear grip strap, and might be German replacements for all I know. BTW, I have ordered several pairs of grips from those folks at Vintage and the quality is excellent. When they arrive, they will be shiny, but if you dull them down a bit with some Walmart Tech carb cleaner, you will be hard pressed to tell them from the original. One thing you need to bear in mind is that they use a real pair of grips to make molds from and the repros will have any and all faults that were on the originals. Some of these grips are relatively uncommon and you can't always find the best examples to copy. Last edited by gyvel; April 2, 2011 at 02:45 AM. |
April 2, 2011, 08:07 PM | #11 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Yes, M3x0.6 is a standard size and taps and dies are readily available, so you might be able to make a screw with minimal expense if you can't find one.
Jim |
April 2, 2011, 10:23 PM | #12 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
Here's a link with a very nice photo of a Bayard. Apparently the cheese head screws are correct and original.
http://unblinkingeye.com/Guns/Bayard/bayard.html |
April 4, 2011, 10:42 PM | #13 |
Senior Member
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
|
thanks Gyvel with that information maybe I can find the cheesehead screw.
I will probably buy the replacement grips also and save the original ones since one is cracked anyway. With these screw dimensions I can contact that company and get the appropriate screw with the grips. Joe
__________________
We live in the greatest country on Earth- always be thankful! |
April 6, 2011, 09:27 AM | #14 |
Senior Member
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
|
Vintage Grips has the grips but not the screws, I just sent them the screw dimensions provided by gyvel.
any ideas for locating these screws? Joe
__________________
We live in the greatest country on Earth- always be thankful! |
|
|