The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

Reply
 
Thread Tools Search this Thread
Old February 19, 2018, 09:40 PM   #1
old fart
Senior Member
 
Join Date: May 24, 2009
Posts: 405
lube??

i went to my local wal mart tonight to pick up a few things and ended up at automotive and sporting goods, their rem oil was up to $7 a can. i went across and looked at oil and remembered about people liking mobile 1, i looked and most was$8 - $10 a quart, then i saw some on clearence, i hope this is ok cause i bought a quart of mobile 1 advanced full synthetic 15w50 for $3, the salesman said that weight didn't sell good. then i went by camping and found wd40 specialist silicone 11oz spray on sale for $2.50, was told 3 in 1 out sells it even tho its made by the same company. are these good lubes for not only my shotgun but also for my ruger lcr handgun? thanks
old fart is offline  
Old February 19, 2018, 10:16 PM   #2
Troy800
Senior Member
 
Join Date: December 25, 2015
Posts: 118
Mobile 1 is a good lubricant and will work fine on a gun. There are subtle differences in oil that some of us have preferences for but that does not mean other oils do not work. I am a firm believer that proper care, cleaning and lube is far more important than the brand name you use. Im not familure with that silicone spray but be carful with spray silicone for general or automotive use. They often contain propellants that can be harmful to plastics and other nonmetallic parts. Be sure to test it first. You can also spray onto a cloth and allow the propellants to evaporate before use. I buy silicone paste in a tube and massage it into a cloth and keep it in a ziplock bag.
Troy800 is offline  
Old February 19, 2018, 10:38 PM   #3
hdwhit
Senior Member
 
Join Date: June 22, 2017
Posts: 1,011
The manual for every gun I own (at least the ones that have manuals) says to use a "high quality firearms oil" or a "light machine oil" (i.e. 3-in-1), so that's what I've been using for the last 40 years without any problem.

You shouldn't have any issues using a motor oil assuming it doesn't prove too thick for the purpose.
hdwhit is offline  
Old February 19, 2018, 11:32 PM   #4
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,955
old fart - do you live in a tropical climate? If so, that 15W-50 oil might work ok. But, if you live any place that experiences winter temperatures, and you expect to fire your gun in that temperature, then you chose the wrong motor oil weight. 15W (winter rating) oil is pretty viscous when compared with lower rated oils (e.g., 0W, 5W). And the 50 part is also very viscous at higher temperatures. That was not $3 well spent for the purposes of lubing a gun.

WD40 is not a satisfactory lubricant for guns. It is great for cleaning up things, or even for some temporary lube. My experience using it on door hinges shows that it will readily gum up and be worse than no lube at all over time. "WD" stands for "water displacement" and that is what it was originally designed to do, not lube a gun.

In my opinion, it sounds like you passed up the best choice of the lubes you mentioned - 3in1 oil. That is a good general purpose lubricant that has kept many a gun working properly for many, many decades. As mentioned above, the best lube is one designed specifically for guns, but 3in1 is the next best substitute.
Mal H is offline  
Old February 20, 2018, 12:19 AM   #5
old fart
Senior Member
 
Join Date: May 24, 2009
Posts: 405
the wd40 silicone has no wd40 in it, its just silicone. as is the 3in1 silicone, i never use regular wd40 as its just as expensive as gun oil. i also don't hunt in extreme cold as nothing under 30 degrees. i just can't take the cold like i used to. mostly if its 40 or above i'll head out for a few hours.
old fart is offline  
Old February 20, 2018, 01:00 AM   #6
Aguila Blanca
Staff
 
Join Date: September 25, 2008
Location: CONUS
Posts: 18,466
Quote:
Originally Posted by Mal H
old fart - do you live in a tropical climate? If so, that 15W-50 oil might work ok. But, if you live any place that experiences winter temperatures, and you expect to fire your gun in that temperature, then you chose the wrong motor oil weight. 15W (winter rating) oil is pretty viscous when compared with lower rated oils (e.g., 0W, 5W). And the 50 part is also very viscous at higher temperatures. That was not $3 well spent for the purposes of lubing a gun.
I disagree. 15W50 synthetic motor oil has been my regular handgun lube for years, and I live in a cold climate. The 15 (cold) viscosity isn't stiff enough to cause things to hang up, and the 50 (warm) viscosity is perfect for semi-autos when shooting has heated up the metal. 15W50 is very difficult to find these days -- I wish I could find a couple of quarts, even at full price.
Aguila Blanca is offline  
Old February 20, 2018, 01:57 AM   #7
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,955
How many years? 1 or 2?
Mal H is offline  
Old February 20, 2018, 08:54 AM   #8
Aguila Blanca
Staff
 
Join Date: September 25, 2008
Location: CONUS
Posts: 18,466
Quote:
How many years? 1 or 2?
Used Mobil-1 15W50 for probably 10 years or more before a friend who is a tech in a VW dealership told me that VW used Castrol, and that they made a 5W50. I used the Castrol to mix with molybdenum powder to make up my own witches brew. But ... the Castrol 5W50 now seems to be more extinct than the Dodo bird, so back to Mobil-1.

When cold (meaning ambient temperature in winter) you don't see much difference between the 5W and the 15W. "Back in the day" (I grew up long before the creation of multi-viscosity motor oils) even 15 would have been considered a "light" oil. We ran straight weight 20 in the winter, and straight weight 30 in the summer.
Aguila Blanca is offline  
Old February 20, 2018, 09:09 AM   #9
cw308
Senior Member
 
Join Date: September 2, 2010
Location: Plainview , Long Island NY
Posts: 3,863
Why not buy the gun oil you think is best , no matter what the price . It will last for years , just think how much money is lost on holsters.

Last edited by cw308; February 20, 2018 at 01:24 PM.
cw308 is offline  
Old February 20, 2018, 09:53 AM   #10
Jackpro555
Member
 
Join Date: February 19, 2018
Location: Mountainview, Carlifornia
Posts: 21
Yeah, this is good idea to use oil to make the guns more shiny. This also helps to make the service reliable.
Jackpro555 is offline  
Old February 20, 2018, 11:06 AM   #11
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,955
Quote:
Originally Posted by Aquila Blanca
Used Mobil-1 15W50 for probably 10 years or more ...
I know. I was just messin' with you. I saw in an older post that you recommended the 15W50 Mobil 1.

We agree that Mobil 1 is a very good oil for guns, but we'll just disagree on the viscosity that is best for that application. What works well in a car engine is not necessarily what will work well in a gun. The heat factor alone makes the two different applications require different viscosities.
Mal H is offline  
Old February 20, 2018, 11:35 AM   #12
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
Old Dogs can learn new tricks !!!

old fart
Glad you beat me to posting this question. Recently took an NRA class and the instructor really impressed me with his knowledge. A good instructor doesn't have to prove how good he is as it will be confirmed, in short order. He mentioned his use and preference for Mobile-1. Later I contacted him and asked about the grade. He said that he uses 5W30 but didn't really matter. So thanks for your post and plan on purchasing some. ......

Quote:
We agree that Mobil 1 is a very good oil for guns, but we'll just disagree on the viscosity that is best for that application.

Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old February 20, 2018, 12:49 PM   #13
Aguila Blanca
Staff
 
Join Date: September 25, 2008
Location: CONUS
Posts: 18,466
Quote:
Originally Posted by Mal H
We agree that Mobil 1 is a very good oil for guns, but we'll just disagree on the viscosity that is best for that application. What works well in a car engine is not necessarily what will work well in a gun. The heat factor alone makes the two different applications require different viscosities.
That's what I like about the multi-viscosity "motor" oils. I shoot almost exclusively 1911s, and if I run a gun "wet" with a light oil, once the gun heats up I end up wearing more oil that stays on the slide rails. Regardless of whether the "cold" viscosity is 5 or 15, the multi-vis ending in "50" seems to do a better job of staying on the slide rails and off my shirt.
Aguila Blanca is offline  
Old February 20, 2018, 01:03 PM   #14
RUT
Senior Member
 
Join Date: November 17, 2004
Location: NH, USA
Posts: 812
>>Why not buy the gun oil the you think is best , no matter what the price . It will last for years , just think how much money is lost on holsters.<<

I concur!! I always wonder how people can spend hundreds of dollars on guns and then cheap out on the lube. Not worth fretting about.
__________________
Liberals don't care what you do... as long as it's mandated.
RUT is offline  
Old February 20, 2018, 01:44 PM   #15
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
"...assuming it doesn't prove too thick..." More about all the other stuff in it that might react with finishes and materials. Mind you, motor oil is the only thing we got in The Queen's Service.
Castrol is just a brand name.
In any case, grease is a lube. Oil is for rust protection/prevention. Grease on moving parts. Oil on everything else.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old February 20, 2018, 04:25 PM   #16
DaleA
Senior Member
 
Join Date: September 12, 2002
Location: Twin Cities, MN
Posts: 5,313
Quote:
Why not buy the gun oil you think is best , no matter what the price . It will last for years , just think how much money is lost on holsters.
IMhO truer words would be hard to come by, both about the oil and the holsters.
DaleA is offline  
Old February 20, 2018, 04:56 PM   #17
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
Quote:
>>Why not buy the gun oil the you think is best , no matter what the price . It will last for years , just think how much money is lost on holsters.<<
Quote:
IMhO truer words would be hard to come by, both about the oil and the holsters.
Quote:
I concur!! I always wonder how people can spend hundreds of dollars on guns and then cheap out on the lube. Not worth fretting about.
Lots of truth there. Homemade magic potions are not one bit better than any number of quality gun specific products that come in very convenient packaging.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old February 20, 2018, 05:10 PM   #18
Aguila Blanca
Staff
 
Join Date: September 25, 2008
Location: CONUS
Posts: 18,466
Quote:
Originally Posted by T O'Heir
In any case, grease is a lube. Oil is for rust protection/prevention. Grease on moving parts. Oil on everything else.
How often do you grease the crankshaft in the engine of your car?
Aguila Blanca is offline  
Old February 20, 2018, 06:54 PM   #19
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
Quote:
How often do you grease the crankshaft in the engine of your car?
LOL!
The old adage. Grease if it slides, oil if it rotates.
But Glock kinda threw that one out the window. A tiny little drop of oil spread in only a couple places.
When it comes to a Glock. If you think you don't have enough oil on it, you probably already have too much!
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old February 20, 2018, 07:25 PM   #20
Mike38
Senior Member
 
Join Date: December 28, 2009
Location: North Central Illinois
Posts: 2,710
I use Mobile One Syn 5w20. The indoor range I shoot at doesn't have any heat, unless you turn it on when you get there. One weekend here about a month or so ago it was below zero inside the range. About 20 below outside. None of my semi auto pistols would work correctly until the indoor temp got up to around 30. Good thing I brought along a .22 revolver, otherwise I would have had a long wait. If 5w20 gets too thick for a cold pistol, 15w50 is going to be way too thick. Granted, these are extreme cases, normal people don't shoot when it's below zero, but I'm not normal. But if you needed a gun for self defense at extreme cold temps, you sure as heck don't want it to choke. I've heard of people that use 0w syn oil for cold temp use on guns. Never tried it, but might.
Mike38 is offline  
Old February 21, 2018, 12:14 AM   #21
kymasabe
Senior Member
 
Join Date: June 10, 2005
Location: SW Florida
Posts: 2,747
It never occurred to me to use anything but gun lubes on guns. I've been using gun-specific lubes for at least 30 years....I'm not sure I'd trust anything else. 3-n-1 probably works great in Grandma's Singer sewing machine but I'm sure as heck not pouring it in my Sig or S&W.
__________________
God's creatures big and small, eat them one, eat them all.
kymasabe is offline  
Old February 21, 2018, 12:16 AM   #22
kymasabe
Senior Member
 
Join Date: June 10, 2005
Location: SW Florida
Posts: 2,747
Quote:
Originally Posted by Cheapshooter View Post
LOL!
The old adage. Grease if it slides, oil if it rotates.
But Glock kinda threw that one out the window. A tiny little drop of oil spread in only a couple places.
When it comes to a Glock. If you think you don't have enough oil on it, you probably already have too much!
Grease if it slides? Then why do we lube wheel bearings with grease?
__________________
God's creatures big and small, eat them one, eat them all.
kymasabe is offline  
Old February 21, 2018, 08:03 AM   #23
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
Quote:
Grease if it slides? Then why do we lube wheel bearings with grease?
Because they are on vehicles, and the old adage is about guns!
Like I said, there are exceptions. Glock says only oil, and not very much of it.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old February 21, 2018, 09:28 AM   #24
Schlitz 45
Senior Member
 
Join Date: January 14, 2018
Location: Colorado
Posts: 385
I've been using Amsoil in my motorcycles for over 20 years & was thinking of giving their gun lube a try on my next oil order to see what its like.
https://www.amsoil.com/shop/by-produ...nd-protectant/
Schlitz 45 is offline  
Old February 23, 2018, 04:56 PM   #25
RUT
Senior Member
 
Join Date: November 17, 2004
Location: NH, USA
Posts: 812
>>I've been using Amsoil in my motorcycles for over 20 years & was thinking of giving their gun lube a try on my next oil order to see what its like<<

Same on this end, and I did add a couple of bottles to my last order. It works as well as anything else I guess, and tends to stay on in its semi liquid state forever. I can't speak for its long run efficacy though, but it's worth a try.
__________________
Liberals don't care what you do... as long as it's mandated.
RUT is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08342 seconds with 8 queries