|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 19, 2008, 09:41 PM | #1 |
Senior Member
Join Date: December 2, 2007
Location: South TX
Posts: 269
|
New to reloading: 9mm Luger USPSA load recommendations
Sorry, I'm another new soon-to-be reloader asking dumb questions. I would really appreciate some advice from you guys experienced with IPSC/USPSA Production class 9mm loads.
I've been shooting 124gr FMJ reloads from CCCAmmo (rated at 1050fps) and do well with them. I have better luck with 124s shooting steel plate/poppers than I do with 115gr. (CZ75B/4.72" bbl.) . I've gathered most of my list of equipment needed, but what I need now are suggestions for type/brand of powder, bullets and loads to use. I shoot 200-300 rds/week. Cost, power factor, and cleanliness matter. Thanks for any magic formulas you're willing to share. |
March 20, 2008, 12:04 AM | #2 |
Senior Member
Join Date: December 12, 1999
Location: Fort Collins, Colorado, USA
Posts: 2,682
|
My 9mm load is a 124gr plated RN with 4.2gr Titegroup.
__________________
Zak Smith . DEMIGOD LLC . THUNDER BEAST ARMS CORP . COLORADO MULTI-GUN My PM inbox full? Send e-mail instead.
|
March 20, 2008, 11:35 AM | #3 |
Member
Join Date: November 3, 2007
Posts: 22
|
I run the same load as Zak, works great.
|
March 20, 2008, 11:11 PM | #4 |
Senior Member
Join Date: December 2, 2007
Location: South TX
Posts: 269
|
Thanks guys.
I'm finding a lot of Comp. shooters on 3 forums like Titegroup and W231 with 124s.
|
March 23, 2008, 11:04 AM | #5 |
Junior Member
Join Date: July 13, 2007
Posts: 13
|
|
|
|