The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old March 29, 2019, 08:51 AM   #1
Nick_M
Junior Member
 
Join Date: November 8, 2017
Location: Philadelphia, PA
Posts: 2
Smith & Wesson knives?

Hi all,

I was wondering if SW really make good knives?
I saw several online, and as long as they are okay (which I doubt based on the price), I will pick one. I have several SWs in my collection, so I was wondering about the knives.

Or that's just some Chinese facility using their name to sell their stuff?
Thanks.
Nick_M is offline  
Old March 29, 2019, 08:54 AM   #2
Nick_M
Junior Member
 
Join Date: November 8, 2017
Location: Philadelphia, PA
Posts: 2
That's the one (there are many more avail online)
https://www.recreationid.com/smith-w...526488980.html
Nick_M is offline  
Old March 29, 2019, 09:46 AM   #3
Sharkbite
Senior Member
 
Join Date: November 4, 2013
Location: Western slope of Colorado
Posts: 3,250
The only S&W knife i ever handled was a POS. A folder with a liner lock that would not stay locked. I ended up dulling the blade and using it as a prop in our shoothouse. A total wast of money.
Sharkbite is offline  
Old March 29, 2019, 02:05 PM   #4
rpseraph
Senior Member
 
Join Date: October 23, 2015
Location: MinneSNOWta
Posts: 452
The majority of SW knives are made overseas and rebranded. Most are cheaper construction and pretty mild steel. I believe that they have a higher end line with better steels and materials, but I can't recall the name of that line at the moment.

I have a few SW knives, and they are... meh. The locks are OK, the materials are OK, but they are price point knives. At that price point, I'd much rather get a Kershaw or a Gerber. If want American or better steels you'll pay a little (or a lot) more.
rpseraph is offline  
Old March 29, 2019, 03:53 PM   #5
Elkins45
Senior Member
 
Join Date: February 24, 2010
Posts: 495
They are basically the same quality as the knives they sell on the counter at truck stops and gas stations.
Elkins45 is offline  
Old March 29, 2019, 05:01 PM   #6
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 10,059
S&W does not make any knives. They solsd the rights to the S&W name for cutlery. All the knives are made in China, TMK.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old March 29, 2019, 06:29 PM   #7
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 9,680
I wouldn't buy one in blister packaging. If it is something you can actually hold and closely inspect before buying maybe. Some of the Chinese made knives are actually very well made. Spyderco, Kershaw, CRKT, Ruger and several others have budget lines made in China that are exceptional values. Not quite as good as their $200 knives, but some of them in the $20-$50 range are not bad at all.

Probably the most knife you can get for the money now are the Ganzo knives made in China. They use the same lock system as Benchmade and are very well made. Most of them are 440C steel which isn't a high end exotic steel, but a very good steel.

https://www.amazon.com/s?k=ganzo+kni...nb_sb_ss_i_1_5
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong"

Winston Churchill
jmr40 is offline  
Old March 29, 2019, 06:53 PM   #8
BBarn
Senior Member
 
Join Date: December 22, 2015
Posts: 789
Blade is advertised as 4034 steel, which is a low cost entry level stainless steel similar to 420HC. So I would expect fairly good corrosion resistance with rather poor edge holding.
BBarn is offline  
Old March 29, 2019, 07:00 PM   #9
hub1home
Member
 
Join Date: November 15, 2014
Posts: 33
You get what you pay for. It's a waste of money!
hub1home is offline  
Old March 29, 2019, 07:04 PM   #10
2wheelwander
Senior Member
 
Join Date: January 9, 2018
Posts: 294
Had one years ago trusting a name - before I learned to trust a price point much more. Total junk.

Aimed at 18 year old kids knowing nothing about knives but not old enough to buy a real Smith and Wesson.
2wheelwander is offline  
Old March 29, 2019, 08:33 PM   #11
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 4,559
99% I have seen are junk, junk, junk. Our S&W rep for the P.D. did give me a jam up tactical knife with their name on it.
reynolds357 is online now  
Old March 29, 2019, 11:35 PM   #12
briandg
Senior Member
 
Join Date: May 4, 2010
Posts: 5,445
That cute little thing with all of the black and plastic and curvy things with the serrations was made as a toy. look at the shape of it and the absolutely ridiculous blade shape and you will realize that it isn't made for any sort of work. I'm sure that it will work well as a letter opener but if you try anything more complicated than splitting an apple it will disappoint you.
__________________
None.
briandg is offline  
Old March 30, 2019, 10:37 AM   #13
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 6,458
Decades ago,maybe 1970's,S+W made some nice looking fixed blade knives of decent design.(It appeared)

They had short stub narrow tangs set in what may have been Pakkawood.


Now...I'm not all about the YouTube fuzz sticks and batonning kindling with the trusty Mora stuff. The dog,the tarp hooch,the stew in the pot (yawn) overnight "survivor"I don't generally do that with a knife.

But young and dumb in the 70's,I did it with my S+W.The handle split. That's how I discovered the roughly 1/2 in by 1 1/2 in tang. This knife had a threaded cap on the handle,presumably some "survival" theme.

Yes,it was abuse,and it failed badly.


The smaller of the two knives,another nice looking knife..looking close revealed a fine,black,nearly invisible crack from heat treat,across the blade near the handle.I never broke it because I did not carry it.


Fourty years or so s a long time,but that was my S+W experience. I think it was Bangor Punta days.


So close to being good! But,not

Last edited by HiBC; March 30, 2019 at 10:45 AM.
HiBC is offline  
Old March 30, 2019, 05:53 PM   #14
Rangerrich99
Senior Member
 
Join Date: March 20, 2014
Location: Kinda near Phoenix, AZ
Posts: 1,140
Never buy a knife made in China. Or to be more specific, never buy knives made with Chinese steel. Chinese steel invariably has a high sulphur content, making them difficult to put a good edge on, and won't hold an edge for very long. They're all junk.

Buy knife steel from the US, Germany, Japan, or Sweden.
Rangerrich99 is offline  
Old April 3, 2019, 07:08 AM   #15
gbclarkson
Senior Member
 
Join Date: January 4, 2014
Location: None of yer business, sonny
Posts: 321
I concur - junk. I bought a "Smith and Wesson" first responder knife for the truck and it won't keep an edge even with minimal use and is falling apart. I got it before I learned that big-name companies make a buck or three each time their logo is stamped onto some other company's cheap product.
gbclarkson is offline  
Old April 4, 2019, 03:30 PM   #16
5whiskey
Senior Member
 
Join Date: October 23, 2005
Location: US
Posts: 3,157
Nick what are you looking for? If fixed blade, there actually are some really good inexpensive options from morakniv and several others. The blade quality FAR exceeds what it should for the price. Only problem is they aren't tactical looking... if that IS a problem for you.

For my pocket folder, I have a cheap CRKT. It takes a good edge (can shave hair with it after a few licks on a fine stone) and holds it reasonably well. Durability is better than it should be for such a cheap knife. I carried Gerber paraframes for my cheap folder option for years. They were pretty decent, but I like the budget CRKT better.

There are options for really good blades that don't cost very much. You usually must forego stainless steel and accept carbon steel patina, along with the hopes of it looking "tacticool." But... options exist.
__________________
Support the NRA-ILA Auction, ends 03/09/2018

https://thefiringline.com/forums/sho...d.php?t=593946
5whiskey is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09251 seconds with 8 queries