The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old June 1, 2016, 07:51 AM   #1
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 13,648
Posting QuickLOAD information

Yesterday, May 31, 2016, I had a talk NECO to get updated information about his policy on information from QuickLOAD being included in forum posts. The QuickLOAD EULA gives control of the copyright to QuickLOAD's distributors in their various areas, and NECO is QuickLOAD's distributor in the U.S. Otherwise, since QuickLOAD is copyrighted material, including the graphics, it would just fall under the board's general policy on posting copyrighted material, which is not to do so without express permission from the copyright holder.

NECO said they do not mind the odd screen shot or an occasional load calculation from the software being included in a post. HOWEVER, if load information is included in a post, it must include a disclaimer. So, if you do include such information in a post, the following disclaimer must be copied and pasted at the top of your post:

CAUTION: The following post includes load data generated by calculation in QuickLOAD software based on a particular powder lot, the assumption the primer is as mild as possible, and assumptions about component, chamber and gun geometry that may not correspond well to what you have. Such data should be approached by working up from published starting loads. USE THIS DATA AT YOUR OWN RISK. Neither the writer, The Firing Line, nor the staff of TFL, nor QuickLOAD's author nor its distributor assume any liability for any damage or injury resulting from use of this information or information derived from it.

The board's general policy on posting copyrighted materials otherwise applies. Posting volumes of QuickLOAD data so other folks can get around buying the program for themselves is not allowed under this policy. "Occasional" means just that.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05212 seconds with 10 queries