USP Tactical with cast bullets

SSG-Gibb · July 1, 2009, 06:55 AM

I have been looking into different manufacturers to adorn on my new H&K. What I'm looking for from what info I've gathered is an all stainless construction Can able to be taken apart to be cleaned because I want to shoot Primarily Cast bullets out of it. Any suggestions on a specific manufacturer/model?

PTK · July 1, 2009, 02:14 PM

YHM Cobra .45 M2. It's basically the only take-apart .45 can.

WoofersInc · July 2, 2009, 03:35 PM

If you can find them, the CCF Impuls II is also a take apart suppressor. It is what I am running on my HK Tactical. One thing though, I was under the impression that you weren't supposed to shoot all lead bullets in the HK because of the polygonal rifling.

SSG-Gibb · July 2, 2009, 03:55 PM

I honestly don't know. I only ever shoot cast out of all my Pistols From contender to Desert Eagle never had any problems once I got the loads right for the particular gun.

PTK · July 3, 2009, 01:01 AM

How do you clean the gas port on your Desert Eagle? I've never wanted to shoot lead out of one for that reason.

SSG-Gibb · July 3, 2009, 10:47 AM

I just soak it in clp while not using it like all my gas guns. But after several hundred round a day it can still get a little dirty, In that case a 50/50 mix of vinegar, hydrogen peroxide work wonders.

freakshow10mm · July 3, 2009, 11:57 AM

I had a .45 M2 suppressor but am all out now. It's easy to take apart, is a decent can, and is well made.

SSG-Gibb · July 4, 2009, 06:59 AM

(Freekshow) Do you know of, or have you ever used cast bullets through one though?

July 1, 2009, 06:55 AM	#1
SSG-Gibb Member Join Date: June 25, 2009 Location: The Free state (For now) of PA Posts: 60	USP Tactical with cast bullets I have been looking into different manufacturers to adorn on my new H&K. What I'm looking for from what info I've gathered is an all stainless construction Can able to be taken apart to be cleaned because I want to shoot Primarily Cast bullets out of it. Any suggestions on a specific manufacturer/model?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

July 1, 2009, 02:14 PM	#2
PTK Senior Member Join Date: March 20, 2008 Posts: 442	YHM Cobra .45 M2. It's basically the only take-apart .45 can.

July 2, 2009, 03:35 PM	#3
WoofersInc Senior Member Join Date: April 22, 2007 Location: Las Vegas Posts: 224	If you can find them, the CCF Impuls II is also a take apart suppressor. It is what I am running on my HK Tactical. One thing though, I was under the impression that you weren't supposed to shoot all lead bullets in the HK because of the polygonal rifling.

July 2, 2009, 03:55 PM	#4
SSG-Gibb Member Join Date: June 25, 2009 Location: The Free state (For now) of PA Posts: 60	I honestly don't know. I only ever shoot cast out of all my Pistols From contender to Desert Eagle never had any problems once I got the loads right for the particular gun.

July 3, 2009, 01:01 AM	#5
PTK Senior Member Join Date: March 20, 2008 Posts: 442	How do you clean the gas port on your Desert Eagle? I've never wanted to shoot lead out of one for that reason.

July 3, 2009, 10:47 AM	#6
SSG-Gibb Member Join Date: June 25, 2009 Location: The Free state (For now) of PA Posts: 60	I just soak it in clp while not using it like all my gas guns. But after several hundred round a day it can still get a little dirty, In that case a 50/50 mix of vinegar, hydrogen peroxide work wonders.

July 3, 2009, 11:57 AM	#7
freakshow10mm Junior member Join Date: January 23, 2008 Location: MI Posts: 1,398	I had a .45 M2 suppressor but am all out now. It's easy to take apart, is a decent can, and is well made.

July 4, 2009, 06:59 AM	#8
SSG-Gibb Member Join Date: June 25, 2009 Location: The Free state (For now) of PA Posts: 60	(Freekshow) Do you know of, or have you ever used cast bullets through one though?