Who makes BFR Grips?

44 Deerslayer · May 17, 2018, 05:26 PM

I have a BFR 45-70 with the stock rubber grips. Magnum Research sells some replacement rubber grips and a one piece wood grip as well as a micarta grip that needs factory fitting. I'm not really interested in those.

I'd like a nice single action grip that looks like a Colt or Blackhawk but no one seems to make one for the BFR.

Does anyone know of a grip maker that makes grips for a BFR? I've done a lot of Google searches and always come up empty.

Thanks for any help to point me in the right direction.

Jazzgun · May 17, 2018, 06:11 PM

Quote:

Does anyone know of a grip maker that makes grips for a BFR? I've done a lot of Google searches and always come up empty.

You might send HighValleyRanch a message. He knows a lot about grips and he could probably lead you in the right direction.

Good luck!

Siggy-06 · May 18, 2018, 05:32 AM

I know Hogue makes a pair of wood geips for the BFR.

dhom · May 18, 2018, 06:00 AM

If you decide on custom grips Jack Huntington did mine.

**4V50 Gary** · May 18, 2018, 08:22 AM

ThroneArms. Lew was my classmate.

44 Deerslayer · May 18, 2018, 08:27 PM

Thanks for the ideas, I'll check out some of custom makers that were posted.

disseminator · May 19, 2018, 10:28 AM

I was under the impression the BFR uses the same grips as the Super Blackhawk.

?

BrokenBear · June 2, 2018, 01:51 PM

Just be sure whoever you use ..send them the gun ...no two BFR's are the same shape/size ...makes building BFR grips from a pattern near impossible to get a custom fit

Good Luck

Bear

May 17, 2018, 05:26 PM	#1
44 Deerslayer Senior Member Join Date: July 23, 2005 Location: MN Posts: 337	Who makes BFR Grips? I have a BFR 45-70 with the stock rubber grips. Magnum Research sells some replacement rubber grips and a one piece wood grip as well as a micarta grip that needs factory fitting. I'm not really interested in those. I'd like a nice single action grip that looks like a Colt or Blackhawk but no one seems to make one for the BFR. Does anyone know of a grip maker that makes grips for a BFR? I've done a lot of Google searches and always come up empty. Thanks for any help to point me in the right direction. __________________ Ron NRA Life Member

May 18, 2018, 05:32 AM	#3
Siggy-06 Senior Member Join Date: September 2, 2014 Location: Florida Posts: 1,148	I know Hogue makes a pair of wood geips for the BFR. __________________ Flicks just like a lighter, just a different kind of fire.

May 18, 2018, 08:22 AM	#5
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 21,841	ThroneArms. Lew was my classmate. __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

May 18, 2018, 08:27 PM	#6
44 Deerslayer Senior Member Join Date: July 23, 2005 Location: MN Posts: 337	Thanks for the ideas, I'll check out some of custom makers that were posted. __________________ Ron NRA Life Member

May 18, 2018, 06:00 AM	#4
dhom Member Join Date: January 13, 2013 Posts: 30	If you decide on custom grips Jack Huntington did mine.

May 19, 2018, 10:28 AM	#7
disseminator Senior Member Join Date: November 26, 2016 Location: Minnesota Posts: 960	I was under the impression the BFR uses the same grips as the Super Blackhawk. ?

June 2, 2018, 01:51 PM	#8
BrokenBear Junior Member Join Date: October 15, 2016 Posts: 5	Just be sure whoever you use ..send them the gun ...no two BFR's are the same shape/size ...makes building BFR grips from a pattern near impossible to get a custom fit Good Luck Bear