|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 7, 2013, 04:30 PM | #1 |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
Just bought a Polish P-64 in 9x18 Makarov
...
Last edited by Chris9472; July 9, 2013 at 07:35 PM. |
July 7, 2013, 05:06 PM | #2 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Congratulations. A P-64 is my main carry gun. You may find that the 17lb main spring is a tad too light. If it is too light, the magazine will drop out occasionally (mainspring does double duty). Most P-64s I've seen do best with the 18lb spring (as did my first P-64). The one I've currently got actually needed a 16lb spring to make the DA pull just right. Each one appears to be a little different.
There is no "manufacturer's name". These were made by the Polish gov't in a gov't owned factory. Radom is the name of the town so that is what they are commonly listed as. |
July 7, 2013, 05:27 PM | #3 |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
...
Last edited by Chris9472; July 9, 2013 at 07:31 PM. |
July 7, 2013, 06:04 PM | #4 |
Senior Member
Join Date: May 27, 2006
Posts: 2,313
|
My own P64 is a 1974. It was made in Radom by the famous factory "11", as shown by the number in the oval on the right side of the slide.
I bought it several years ago. P64's were new to the market, and nobody wanted them, due to them not being "real Makarovs". Also, the ridiculous trigger pull hadn't been figured out yet. I paid $139. It was like new condition in every respect. I have put several hundred rounds through it, with zero malfunctions. It more accurate than it has a right to be. I did put a heavier recoil spring and a lighter main spring in...the DA trigger is now very usable, and the heavier recoil spring helped moderate the snappy recoil. I'm no lightweight...I have shot many heavy recoil handguns, including hi-power 44mag loads in various guns. But I found the little P64 to get uncomfortable after a few mags. In particular, the pinky extension on the mag hurt my pinky. The heavier recoil spring made it more bearable. The P64 is a very thin, easy to carry pistol.
__________________
The past is gone...the future may never happen. Be Here Now. |
July 7, 2013, 07:56 PM | #5 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Yes, the main spring is what controlls the DA trigger pull and also holds the magazine retention lever. A monkey could change it out in a matter of minutes. There are only two things you have to be concerned about. First is the little pin that holds the spring in. If you aren't cautious, it will fly off never to be seen again. Use a large paper clip to push the pin out and hold the spring in place until you are ready to remove it. The second thing you need to be concerned with is the grip screw. Use a dab of locktite and don't over tighten it because it WILL crack the grip panely.
|
July 8, 2013, 08:11 AM | #6 |
Senior Member
Join Date: December 15, 2008
Posts: 770
|
Re: Just bought a Polish P-64 in 9x18 Makarov
If you're happy with the price that's all that matters.
I bought the same gun from JG Sales a few years ago for $150. Looks brand new and never fired. Actually looks identical to yours. I put new springs in as well and think I spent $20 on those. It was a carry gun for me for a while and then it got moved to a truck gun. I bought a ton of cheap Brown Bear ammo and doubt i will ever shoot it all up. About 100 rounds at a time is all I want to shoot out of that gun. Last edited by Olympus; July 8, 2013 at 08:18 AM. |
July 8, 2013, 08:22 AM | #7 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
I have two of the little 9x18 guns, they are very well made, good carry size, a bit heavy for a pocket gun, terrible trigger without changing springs and when firing causes me pain from my trigger finger to the corns on my toes. Guess I'm a wimp but that pistol hurts me. I also have PA 63 and Makarov pistols that are a great deal easier to shoot in the same caliber.
|
July 8, 2013, 08:56 AM | #8 |
Senior Member
Join Date: October 18, 2011
Location: 609 NJ
Posts: 705
|
I would recommend the 24# recoil spring over the 22#, I would get a 26 myself if it was available but alas no such luck.
Mine does very well with the 17# mainspring, I've shot about 750 rounds though mine and never once had the mag fall out. Personally I think widening the rear sight was stupid, and wont really help your target acquisition.. The factory sights are actually great for target shooting and the guns are very very accurate. Also, although you don't want to hear it you did get ripped off. I paid $160 plus $20 shipping and $10 for the hand select. So overall $190. The bluing on mine is excellent as are most specially hand selected ones. I don't believe I would gain anything by having the gun refinished. I've never seen one with anything wrong with the grips at all or anything work needing done on the saftey. Also, the spring kit was under $20 shipped to my door and took all of about 5 minutes to install.
__________________
"...with liberty and justice for all." (Must be 21. Void where prohibited. Some restrictions may apply. Not available in all states.) |
July 8, 2013, 09:00 AM | #9 |
Senior Member
Join Date: December 13, 2010
Location: Virginia Beach
Posts: 2,016
|
My P-64 is vintage 1969 (which makes it the same age as me). As mentioned, it has stout recoil, but is extremely accurate. It is well made and has rather nice bluing too. I especially like the loaded chamber indicator. Whenever I look at it, it reminds me of a vintage 1957 Chevy that can be found rolling around Havana, Cuba....complete with the "wings" for the rear sight notch.
I rarely carry it or shoot it.
__________________
NRA Life Member USN Retired |
July 8, 2013, 04:30 PM | #10 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
57 chevy? My two P 64's have a pin protruding in the hammer well like a PPK, are there different loaded indicators?
|
July 8, 2013, 10:00 PM | #11 |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
...
Last edited by Chris9472; July 9, 2013 at 07:31 PM. |
July 9, 2013, 06:44 AM | #12 |
Senior Member
Join Date: May 27, 2006
Posts: 2,313
|
My FFL charges $25 for transfers. Not sure what winders charges to ship, but the last couple firearms I ordered cost about $25 in shipping.
Widners has the P64 for $239. So, $379 with the work supposedly done on your pistol is "OK", I guess. They are nice little pistols, and IMHO, may be a good investment. BTW, Marschal makes a variety of nice wood grips for the little P64: http://www.marschalgrips.com/hires-p64/P64.HTM
__________________
The past is gone...the future may never happen. Be Here Now. |
July 9, 2013, 08:10 AM | #13 |
Senior Member
Join Date: December 15, 2008
Posts: 770
|
Re: Just bought a Polish P-64 in 9x18 Makarov
There is just no way I'd pay that kind of money for the P-64. At $379, you could easily buy a nice used compact polymer gun in 9mm or 40 that would have been much nicer to shoot as well as being a larger caliber for defense and have better sights.
|
July 9, 2013, 09:46 AM | #14 | |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
I do think you significantly overpaid. Here is why.
Assuming a "normal" price for a very good condition P-64 is right at $200, let's look at what extras you paid for. Quote:
So, from all that has been done only the spring change added any real value and that was very minimal. I would defininately not paid more than about $250 for that gun delivered (including shipping but not including FFL fee). |
|
July 9, 2013, 10:11 AM | #15 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
Chris, if you are happy with the pistol shoot it until you are comfortable that it is a good carry pistol and then carry it! I doubt you will lament to others that the recoil is sharp if you have a need to use it for personal protection and you are able to talk about it afterward.
I have had "good deal " purchases and some not so good while others might tell me the error of the purchase, in all cases I keep the item and enjoy. I built several AR's searching for the build I really wanted, upon determining that build it went into the rack with the others...all get shot and are fun, one is special though and all cost more than going to Wallymart and buying off the rack. |
July 9, 2013, 02:05 PM | #16 |
Senior Member
Join Date: April 24, 2008
Location: Ohio
Posts: 1,696
|
You already bought the pistol. So, just shoot and see if it works for you.
I had one a while back when they sold for $150-$170 -- It was like new. I replaced the mainspring and recoil spring -- lightened the DA pull to but SA pull became scary light. Recoil was painful for me. Sold it. It was accurate. I hope you like yours. |
July 9, 2013, 02:41 PM | #17 |
Senior Member
Join Date: October 18, 2011
Location: 609 NJ
Posts: 705
|
most of the unpleasant recoil is the result the slide literally slamming into the frame giving you that "whacking an aluminum baseball bat into solid concrete" feeling.
That's why the strong recoil springs help so much, I SUSPECT that a recoil buffer of some sort will also be extremely beneficial to improving the painful reality of shooting this gun.
__________________
"...with liberty and justice for all." (Must be 21. Void where prohibited. Some restrictions may apply. Not available in all states.) |
July 9, 2013, 04:22 PM | #18 | |
Senior Member
Join Date: December 15, 2008
Posts: 770
|
Re: Just bought a Polish P-64 in 9x18 Makarov
Quote:
I think a wider backstrap would help disperse some of that recoil across a greater surface area as opposed to being all focused in a small area. |
|
July 9, 2013, 04:57 PM | #19 |
Senior Member
Join Date: October 18, 2011
Location: 609 NJ
Posts: 705
|
I think that a thin (perhaps 3/32 thick) piece of rubber would help on the front of the slide stop/ I doubt it would effect the extraction/ejection but I do plan on testing this theory soon
__________________
"...with liberty and justice for all." (Must be 21. Void where prohibited. Some restrictions may apply. Not available in all states.) |
July 9, 2013, 07:29 PM | #20 |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
...
Last edited by Chris9472; July 11, 2013 at 07:47 PM. |
July 9, 2013, 08:04 PM | #21 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Chris, was this the dealer in MD that seems to have lots of P-64s for sale right now? If so, I'm convinced he is trying to take advantage of the current buying mania. My advise is to be patient and watch the auctions. I just did a search on completed auctions and found several that sold recently for right around 200+ that looked very nice.
|
July 9, 2013, 08:07 PM | #22 |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
...
Last edited by Chris9472; July 11, 2013 at 07:46 PM. |
July 10, 2013, 07:31 AM | #23 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
You're right about the current prospects. That's why I advised patience. I watched auctions for 6 months looking for just the right S&W 617 and 629. I found each for about $200 less than I would have paid if I hadn't been patient.
|
July 10, 2013, 10:45 AM | #24 |
Senior Member
Join Date: November 3, 2010
Posts: 2,016
|
Classic Firearms gets some occasionally... They're out-of-stock now but you can get on a notification list and "contact them" for a time estimate... $230:
http://www.classicfirearms.com/hand-...m-p-64-pistols
__________________
What did Mrs. Bullet say to Mr. Bullet? ... "We're having a BeeBee!"... IF THE SHOE FITS, WEAR IT!... IF THE GUN FITS, SHOOT IT! "Experience is something you don't get until just after you need it." |
|
|