|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 26, 2012, 08:02 AM | #1 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
45-70 Springfield performance question
As perhaps you might assume, I am going to have to make myself a lot smarter about the capabilities of the 45-70 Springfield.
Can one of you experts help here? What I am interested in (at this point) is what kind of accuracy can be expected at 100 yards using an original barrel in perfect condition with 70 gr. of black powder and a home cast bullet when the cartridge is loaded by an expert at reloading 45-70 for accuracy. I see this situation as being optimal. My situation will clearly be at a lower level of performance because: 1. The barrel is not perfect. 2. The casting will not be perfect. 3. The load will not be perfect. 4. I am a lousey shot. Armed with the information I am seeking, I intend to determine: 1. How well the rifle shoots 2. How well my rounds shoot 3. How well I shoot (I have not shot a rifle since the Navy in about 1993.)
__________________
Seek truth. Relax. Take a breath. |
November 26, 2012, 10:19 AM | #2 |
Senior Member
Join Date: May 12, 2011
Location: New Mexico
Posts: 1,315
|
Buy some Remington .45-70-405 Government for practice in the meanwhile.
They hit pretty close. |
November 26, 2012, 10:26 AM | #3 |
Senior Member
Join Date: April 22, 2012
Location: Huntsville, Utah
Posts: 106
|
Springfield accuracy
Doc,
I can't directly answer your question, however I have an original Springfield Trapdoor that I have shot (about 10 years ago). I found that even with a barrel that had some pitting it was pretty darn accurate. Paul Matthews talks about being happy with a gun that shoots within about 1 minute of arc. Obviously he spent decades working on all of the variables. I've done more reading than actual shooting and working up loads for my 45-70 Sharps, and what I have learned is that there are an enormous amount of variables. So, I wouldn't necessarily assume right away that it's your gun if your patterns are not good! I'll let the experts give you a grouping number... my 45-70 groups at 100yds are nothing to speak of, even with a new sharps. Cheeers,
__________________
Chowmi |
November 26, 2012, 02:25 PM | #4 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Strafer and F16
I will take your advice, Strafer.
F16, Very good news about the performane of a less than perfect barrel. I went to work on the bore of the rifle I bought on Saturday and the thing came out looking pretty darned good. The rifling is very good. The finish on the surface of the lands and grooves has some very minor pitting. Very minor indeed. We shall see.
__________________
Seek truth. Relax. Take a breath. |
November 26, 2012, 07:39 PM | #5 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
My 84 carbine would do 4 inches at 100 yards with 70 grains of Pyrodex and a 405 bullet. I think it could have done better if I'd played with loads a little more.
|
November 27, 2012, 05:13 AM | #6 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
More good info
Tnx Hawg.
__________________
Seek truth. Relax. Take a breath. |
November 27, 2012, 05:38 AM | #7 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Just read an email response...
From Titan Reloading recommending the 405.
Got my eye on an auction on GB for some dies, some brass and some bullets. Fifty bucks right now but that price will definitely go up.
__________________
Seek truth. Relax. Take a breath. |
November 28, 2012, 10:46 AM | #8 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
The barrel being less than pristine doesn't mean it wont shoot. My friend got himself a 22 (mod 60) that had been in a house fire and got wet and rusty from sitting after it had been drenched with fireman hose water. We "knew" it was to be a lost cause but cleaned it up anyway and I'll be darned if it didn't shoot better than my 10/22.
So the only thing you can do is to try and hope for the best. I have no knowledge of BP loads but I know that RX7 works very very well in many 45/70 loads. |
November 28, 2012, 10:56 AM | #9 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
You could check with "Woody" on the Shiloh board.
He was shooting a Trapdoor at the Southeastern Regional Midrange in Georgia last month and doing pretty well with it. It kind of fell off at 600 yards but was right in there with the custom and sporting rifles at 200 and 300. http://www.shilohrifle.com/forums/index.php |
November 28, 2012, 11:22 AM | #10 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Ed and Jim
Thanks for the inputs.
I have looked closely at the muzzle and it appears the shortening of the barrel was done by someone with less than the right tools. The barrel was not crowned and I am not certain how square it is. This will be another thing I will keep in mind as I go shoot the thing. Looks like the work was done a long time ago.
__________________
Seek truth. Relax. Take a breath. |
November 28, 2012, 11:32 AM | #11 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Heres some more shots
Lock after a little clean-up
Breach and receiver
__________________
Seek truth. Relax. Take a breath. |
November 28, 2012, 11:56 AM | #12 |
Junior member
Join Date: January 1, 2007
Location: Idaho
Posts: 2,282
|
I own a carbine looking cut down rifle with a primo barrel. Back when I could see I could put five rounds into two inches @ 100yds, currently can't put two rounds into five inches.
The bores on the Springfields weren't necessarily .458. Mine is 462, so I ordered a mold for that calibre loaded it with a bunch of pyrodex, put a milk carton spacer over the powder, kaboom. |
November 28, 2012, 12:19 PM | #13 |
Senior Member
Join Date: May 12, 2011
Location: New Mexico
Posts: 1,315
|
Hawg, is that 70gr. weighed pyrodex, crush compressed with the bullet?
I'm casting about for a proper recipe for a BP plinking load. Thanks. |
November 28, 2012, 06:37 PM | #14 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
70 grains measured and bullet compressed. Its not crushed.
|
November 28, 2012, 09:14 PM | #15 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
Fake powders like Pyrodex are figured on volume measure.
The load would be however much Pyrodex filled a measure that held 70 grains of FFg. As Salvadore says, Trapdoor barrels run large. You need either a large diameter bullet, a hollowbase bullet (like 1873) or a soft bullet bumped up by real black powder. |
November 29, 2012, 02:50 AM | #16 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Hmmmm
I am just about ready to get a mold for bullets
Sounds like I had better find out the bore diameter before I waste some money.
__________________
Seek truth. Relax. Take a breath. |
November 29, 2012, 06:34 PM | #17 | ||
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Quote:
Quote:
|
||
November 29, 2012, 06:38 PM | #18 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
OK.
I am unacquainted with Pyrodex. My game (NRA BPCR) allows it but I don't know anybody who uses it. |
November 29, 2012, 07:52 PM | #19 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Pyrodex is basically the same as bp but it has less potassium nitrate and uses potassium perchlorate to make up the difference.
|
November 29, 2012, 11:39 PM | #20 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
I know. I am not going to put that stuff in MY nice rifles.
Maybe in a blister packed straightline so as to get a longer hunting season because they don't sell the real stuff at Cheapmart. There was an effort to get black powder classed with smokeless and subs for shipping, but I guess it fell through. |
|
|